• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.240-241
• /
• 2006

Metal/diamond binary composite coatings on Al substrate without grit blasting were deposited by cold spray process with insitu powder preheating. Microstructural characterization of the as-sprayed coatings with different diamond size, strength and with/without Ti coating on diamond was carried out by OM and SEM. The assessment of basic properties such as tensile bond strength and hardness of the coatings, and the deposition efficiency was also carried out. Particular attention on the composite coatings was on the diamond fracture phenomenon during the cold spray deposition and the interface bonding between the diamond and the Fe-based metal matrix.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.242-243
• /
• 2006

NiTiZrSiSn bulk metallic glass powder was produced using inert gas atomization and then was sprayed onto a SS 41 mild steel substrate using the kinetic spraying process. Through this study, the effects of thermal energy of in-flight particle and crystallization degree by powder preheating temperature were evaluated. The deformation behavior of bulk metallic glass is very interesting and it is largely dependent on the temperature. The crystalline phase formation at impact interface was dependent on the in-flight particle temperature. In addition, variations in the impact behavior need to be considered at high strain rate and in-flight particle temperature.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.278-281
• /
• 1999

PLZT thin films on Pt/Ti/SiO$_2$/Si substrate were fabricated with different Thickness by pulsed laser deposition. 14/50/50 PLZT thin film showed a maximum dielectric constant value of $\varepsilon$$_{t}$=985 at 5000$\AA$, and $\varepsilon$$_{t}$=668 at 2000A. P-EI hysteresis loop of 14/50/50 PLZT thin film was slim ferroelectric. Leakage current density of 14/50/70 PLZT thin film was 10$^{-8}$ A/$\textrm{cm}^2$ at 2000$\AA$.EX>.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.224-227
• /
• 1999

Ferroelectric Pb(Zr$\sub$0.52/Ti$\sub$0.48/)O$_3$ thin films were fabricated by pulsed laser deposition, mainly varying process conditions such as substrate temperature, oxygen pressure, and laser energy, PZT films annealed at more than 600$^{\circ}C$ were crystallized into pure perovskite phases regardless of deposition temperatures. Lower deposition temperature of 400$^{\circ}C$ accompanied with post-annealing at 650$^{\circ}C$ resulted in denser microstructures with extremely small grains compated to those of thin films annealed at higher deposition temperatures. Hysteresis curves of thin film with small grains exhibitied good squareness and low leakage characteristics.

• Bulletin of the Korean Chemical Society
• /
• 제20권8호
• /
• pp.869-874
• /
• 1999

In this paper, electrochemical techniques are used to investigate hydrothermal-electrochemically formation of barium titanate (BT) ceramic films. For comparison, the electrochemical behaviors of anodic titanium oxide films formed in alkaline solution were also investigated both at room temperature and in hydrothermal condition at 150.0 ℃. Film structure and morphology were identified by scanning electron microscopy (SEM) and atomic force microscopy (AFM). Titanium oxide films produced at different potentials exhibit different film morphology. The breakdown of titanium oxide films anodic growth on Ti electrode plays an important roles in the formation of BT films. BT films can grow on anodic oxide/metal substrate interface by short-circuit path, and the dissolution-precipitation processes on the ceramic film/solution interface control the film structure and morphology. Based upon the current experimental results and our previous work, extensively schematic proce-dures are proposed to model the mechanism of ceramic film formation by hydrothermal-electrochemical method.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2008년도 하계학술연구발표회
• /
• pp.101-101
• /
• 2008

• 한국광학회지
• /
• 제14권5호
• /
• pp.545-554
• /
• 2003

Ti:LiNbO$_3$세 도파로 방향성 결합기와 CPW진행파 전극으로 구성된 완전 스위칭이 가능한 외부 광변조기를 설계, 제작하였다. 결합 모드 이론을 이용하여 세 도파로 광결합기의 스위칭 현상을 해석하였으며, 유한차분법을 이용하여 단일 모드를 갖는 광도파로의 설계 및 공정 파라미터를 도출하였으며, 이를 이용하여 광 결합길이를 계산하였다. 등각사상법과 반복이완법을 이용하여, CPW구조 진행파 전극의 특성임피던스와 M/W(Micro wave)유효굴절률 정합조건을 동시에 만족하는 설계 파라미터를 도출하였다. 제작된 세 도파로 광변조기의 삽입손실과 스위칭 전압은 약 4㏈와 19V였으며, S 파라미터를 측정하여 특성임피던스 Z$_{c}$=45 Ω M/W 유효굴절률 N$_{eff}$=2.20, 그리고 감쇠상수 $\alpha$$_{0}$=0.055/cm√GHZ 등의 진행파 전극 파라미터를 추출하였다. 추출된 진행파 전극 파라미터를 이용하여 이론적인 주파수 응답 R($\omega$)을 계산하였으며, Photo Detector로 측정된 주파수 응답과 비교하였다. 주파수 응답 측정 결과, 3㏈ 변조대역폭은 13 GHz로 측정되었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.993-994
• /
• 2008

Electrochromic (EC) devices are capable of reversibly changing their optical properties upon charge injection and extraction induced by the external voltage. The characteristics of the EC device, such as low power consumption, high coloration efficiency, and memory effects under open circuit status, make them suitable for use in a variety of applications including smart windows and electronic papers. Coloration due to reduction or oxidation of redox chromophores can be used for EC devices (e-paper), but the switching time is slow (second level). Recently, with increasing demand for the low cost, lightweight flat panel display with paper-like readability (electronic paper), an EC display technology based on dye-modified $TiO_2$ nanoparticle electrode was developed. A well known organic dye molecule, viologen, was adsorbed on the surface of a mesoporous $TiO_2$ nanoparticle film to form the EC electrode. On the other hand, ZnO is a wide bandgap II-VI semiconductor which has been applied in many fields such as UV lasers, field effect transistors and transparent conductors. The bandgap of the bulk ZnO is about 3.37 eV, which is close to that of the $TiO_2$ (3.4 eV). As a traditional transparent conductor, ZnO has excellent electron transport properties, even in ZnO nanoparticle films. In the past few years, one-dimension (1D) nanostructures of ZnO have attracted extensive research interest. In particular, 1D ZnO nanowires renders much better electron transportation capability by providing a direct conduction path for electron transport and greatly reducing the number of grain boundaries. These unique advantages make ZnO nanowires a promising matrix electrode for EC dye molecule loading. ZnO nanowires grow vertically from the substrate and form a dense array (Fig. 1). The ZnO nanowires show regular hexagonal cross section and the average diameter of the ZnO nanowires is about 100 nm. The cross-section image of the ZnO nanowires array (Fig. 1) indicates that the length of the ZnO nanowires is about $6\;{\mu}m$. From one on/off cycle of the ZnO EC cell (Fig. 2). We can see that, the switching time of a ZnO nanowire electrode EC cell with an active area of $1\;{\times}\;1\;cm^2$ is 170 ms and 142 ms for coloration and bleaching, respectively. The coloration and bleaching time is faster compared to the $TiO_2$ mesoporous EC devices with both coloration and bleaching time of about 250 ms for a device with an active area of $2.5\;cm^2$. With further optimization, it is possible that the response time can reach ten(s) of millisecond, i.e. capable of displaying video. Fig. 3 shows a prototype with two different transmittance states. It can be seen that good contrast was obtained. The retention was at least a few hours for these prototypes. Being an oxide, ZnO is oxidation resistant, i.e. it is more durable for field emission cathode. ZnO nanotetropods were also applied to realize the first prototype triode field emission device, making use of scattered surface-conduction electrons for field emission (Fig. 4). The device has a high efficiency (field emitted electron to total electron ratio) of about 60%. With this high efficiency, we were able to fabricate some prototype displays (Fig. 5 showing some alphanumerical symbols). ZnO tetrapods have four legs, which guarantees that there is one leg always pointing upward, even using screen printing method to fabricate the cathode.

• 대한전자공학회논문지SD
• /
• 제37권4호
• /
• pp.7-14
• /
• 2000

Bi/sub 4/Ti/sub 3/O/sub 12/ (BIT) 박막을 acetate 계 precursor 를 이용한 sol-gel 법으로 제작한 후, 구조적 및 전기적 특성을 조사하여 NVFRAM (Won-Volatile Ferroelectric RAM)으로의 응용가능성을 조사하였다. DT-TG (Differential Thermal-Thermal Gravimetric) 분석으로 drying 온도와 annealing 온도가 각각 400℃ 와 650℃ 인 BIT 박막의 열처리조건을 확립하였다. Pt/Ta/Sio/sub 2//Si 기판 위에 제작된 BIT 박막은 완전한 orthorhombic perovskite상을 가지며, 입자크기가 약 100nm 이고 표면 거칠기는 약 70.2Å 으로 비교적 치밀한 형상을 나타내었다. 10㎑ 의 주파수에서 비유전률과 유전손실은 각각 176 과 0.038 이었으며, 100 ㎸/cm 의 전기장에서 누설전류밀도는 4.71㎂/㎠ 이었다. ±250㎸/㎝ 에서 이력곡선을 측정한 결과, 잔류분극 (Pr)과 항전계 (Ec)는 각각 5.92μC/㎠ 과 86.3㎸/㎝ 이었다. BIT 박막에 ±5V 의 사각펄스를 인가하여 피로특성을 측정한 결과, 잔류분극은 초기값 5.92μC/㎠ 에서 10/sup 9/회에서는 3.95μC/㎠ 로 약 33% 감소하였다.

• 한국광학회지
• /
• 제28권1호
• /
• pp.28-32
• /
• 2017

본 논문에서는 LSPR 센서에 적용하기 위한 제한된 높이 100 nm에서 $TiO_2$, $SiO_2$의 다중층을 이용한 LSPR 센서를 디자인을 제안했다. LSPR 센서의 구조는 유전체 층과 나노 구조가 있는 금속층으로 디자인 하였다. 금속층은 금 박막 40 nm와 높이 40 nm, 주기 600 nm, 선폭 300 nm인 나노와이어 구조체를 올려놓은 구조로 디자인하였다. 유전체 층의 높이를 100nm로 제한하고, $TiO_2$, $SiO_2$가 반복되는 구조로 하여 반복층의 개수를 1~4개로 변경하면서 비교 분석하였다. 파장 가변형 SPR을 디자인하기 위해 각도를 75도로 고정하고 파장을 변화시켜 FEM방식으로 계산하였다. 결과로 굴절율이 고정되어 있을 때 다중층의 개수가 증가할수록 공명 파장이 짧아지는 현상을 확인 하였고, 파장의 변화에 더 민감하게 변화하는 것을 측정하였다. 다만, 다중층의 개수가 3개층 이상이 되면 변화하지 않는 것을 확인하였다.