• Korean Journal of Applied Biomechanics
• /
• v.13 no.3
• /
• pp.181-197
• /
• 2003

The Purpose of this study was to examine the kinematic analysis of the upper-limb motion of wheelchair basketball free throw shooting. Three-dimensional kinematic data were obtained from 8 male wheelchair basketball players performing a successful free throw. Players were divided into three groups, according to their IWBF classification(Group 1: 1 point players, Group 2: 2-2.5point players and Group 3:3.5-4 point players) Wheelchair basketball free throw motions were taken by video camera. The three-dimensional coordinates was processed by DLT. Players from Group 1 and 2 tended to release the ball from a lower height, with greater velocity and release angle. Players from Group 1 showed greater shoulder horizontal adduction and horizontal abduction angle, wrist ulnar flexion and radial flexion angle, and trunk angle. but players from Group 2 appeared lower shoulder abduction. Upper limb angular velocity showed most greatly in hands from Group 1, upperarm from Group 2, and forearm from Group 3.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.1
• /
• pp.185-204
• /
• 2003

The purpose of this study was to obtain the data for stable and accurate techniques of the free throw in basketball. The subjects of this study were seven male basketball player consisted of college students athletes. Free throw motions were taken by video camera. The three-dimensional coordinates was processed by DLT. The variables were the velocity, the angular velocity of the upper extremity segments, degree, and angular momentum. The result of analysis is summarized as follows. 1. The velocity and angular velocity of the upper extremity segment was showed an gradual increase and a smooth velocity transfer, transferring from proximal segment to distal segment at free throw motion in basketball. 2. The local term and remote term angular velocity momentum of the proximal segment showed larger than that of the distal segment in X, Y, Z axis component all. 3. The remote term angular momentum was showed larger than that of the local term angular momentum in X, Y, Z axis component all. 4. The angular motion of the upper trunk and upper arm, upper arm and forearm was showed in opposite direction and symmetrical angular momentum in local term angular momentum of the Y and Z axis component. 5. All the segments of upper extremity segment was showed left rotation in remote term angular momentum of the Y axis component and right rotation in remote term angular momentum of the Z axis component.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.1
• /
• pp.173-191
• /
• 2002

The purpose of this study was defined efficient throw motion pattern to obtain the quantitative data and to achieve successful bowling through kinetic - kinematic variables on the throw motion. Subject of group composed of three groups : Higher bowlers who are two representative bowlers with 200 average points and one pro-bowler. Middle bowlers who are three common persons with 170 average points. Lower bowler who are three common persons with 150 average points. Motion analysis on throw motion in three groups respectively has been made through three-dimension cinematography using DLT method. Two high-speed video camera at operating 180 frame per secondary. One-way ANOVA has been used to define variable relations. Analyzed result and conclusion are the following : The displacement of back of the hand must have wider difference of each right-left displacement to increase the spin of the ball. In high bowlers group, difference between the front-rear position of back of the hand in case of success and that in case of failure in follow throw is 0.17m. That is to say, momentum in case of success come to increase greatly, compared with that in case of failure. To increase the spin of the ball, the potential difference should be narrower in follow through. In case of the high bowlers, the velocity of the front-rear direction of the back of the hand has been the fastest both in release and follow through, compared with those in other groups, which has contributed to increasing the spin force of the ball. The orders in the resultant velocity of the back of the hand has shown the this : the finger tip$\rightarrow$the back of the hand$\rightarrow$wrist.These orders made the proximal segment support the distal segment. The distal segment has provided the condition to accelerate the velocity. In case of failure, the suddenly increased velocity has caused the failure in the follow through. Acutely flexing the angle of the back of the hand has contributed to lifting to increase the spin of the ball.

• Tunnel and Underground Space
• /
• v.20 no.5
• /
• pp.360-368
• /
• 2010

The paper presents a case study from a surface mine where the controlled augmentation of throw and drop of the blasted muck piles was warranted to spread the muck piles on the lower berm of the bench. While the augmentation of throw increased the lateral spread and the looseness of the broken muck, the augmentation of drop significantly lowered the muck pile height for easy excavation by the excavators. In this light, the present paper highlights and discusses some pertinent changes in the blast design parameters for such specialized application of cast blasting in a surface mine, where a sandstone bench, with average height of 22-24 m was to be made amenable for excavation by 10 m3 rope shovels, which possessed maximum digging capability of up to 14 m. The results of tailoring the blast design parameters for augmentation of throw and drop are compared with the baseline blasts which were earlier practiced on the same bench by dividing the full height of the bench in 2-slices; upper slice (10-14 m high) and lower slice (12-15 m high). Results of fragment size, its distribution and total cycle time of excavator (shovel) are presented, and discussed.

• Environmental and Resource Economics Review
• /
• v.31 no.3
• /
• pp.319-342
• /
• 2022

This study analyzed the effect of pay-as-you-throw bag prices on domestic waste through the natural experiment difference in difference with synthetic control method using cases of price cuts in some districts in Busan in 2019. In order to consider the endogenous problem when estimating demand and price elasticity, the price-invariant district was set as a synthetic control group and the price-cutting district was set as a treatment group. As a result of the analysis, the price elasticity of demand was 0.05~0.11, and the price of the pay-as-you-throw bag had little effect in sales. This seems to be because pay-as-you-throw bag is necessities and account for a very small proportion of household income. This suggests that a policy that can shift the demand curve will be more effective than a price policy to achieve the waste reduction goal because the demand curve is almost vertical.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.8 s.251
• /
• pp.715-721
• /
• 2006

In the present work, nozzle shape of a jet fan is optimized numerically using three-dimensional Reynolds-averaged Navier-Stokes analysis. Standard $k-{\epsilon}$ model is used as a turbulence closure. Response surface method is employed as an optimization technique. The objective function is defined as maximum throw distance. Three geometric variables, i.e., length and angle of nozzle, and interval between two nozzles, are selected as design variables. As the main result of the optimization, the throw distance has been improved effectively.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1513-1516
• /
• 2003

A crank throw, which is one of the crankshaft part for a large diesel engine is manufactured by closed die forging or open die forging. For the purpose of improvement of productivity the open die forging is usually adopted these days. However it has disadvantage of low yield ratio compare to closed die forging. To overcome this problem, the material properties for hot top and bottom zones of ingot are investigated to utilize them to the product and a modified forging process to reduce the material loss of ingot body through forging analysis according to forging factors(a , R, Ø$\sub$B/, Ø$\sub$D/) is suggested.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1995.10a
• /
• pp.157-166
• /
• 1995

A large crank shaft for ship engine consists of several components, such as throw, jornal, pin and flange. These compoents are individually made by open-die forging followed by machining and they are thermally fitted to form the crankshaft. In the present investigation, it was attempted to design an optimum preform for the throw by use of the spread coefficient. The spread coefficient found in the literature was confirmed by comparison with experimental results using plasticine. However, the preform designed by the spread coefficient was unable to produce the final product. The reason was found that the spread coefficient differs distinctly for the magnitude of bite ratio. Therefore, another spread coefficient, especially for low bite ratios, was proposed and the preform was redesigned. It was found that the new preform was able to produce the final product.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.1
• /
• pp.123-130
• /
• 1996

The procedure on the design of a new tungsten cabide throw-away cutting tool system for deep grooving or cut-off machining is suggested. For relieving the maximum stress level at the corner radius of the blade holder, the finite element method is used. Also the pulling test device is proposed for measuring the holding force of the insert between the blade holder and the insert considering the materials in contact and configuration parameters of the holder.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.2
• /
• pp.347-357
• /
• 2009

The purpose of this study was to compare EMG and GRF during a free throw. Seven pairs of surface electrodes were attached to the right-hand side of the body to monitor the flexor carpi radialis (FC), extensor carpi radialis longus (EC), biceps brachii (BB), triceps brachii (TB), rectus femoris (RF), tibialis anterior (TA) and medial gastrocnemius (GM). GRF data from two force platform were collected during a free throw. The results showed that the muscle activities in the unskilled group must be highly activated prior to the moment of release. This means that a skilled participant can shoot a free throw more efficiently while producing less muscle activeness than an unskilled participant. The DCP of unskilled group in the medio-lateral direction were greater than the corresponding values in skilled group. This showed that the unskilled group were not able to shoot the free throws stably. Thus, when a teacher or instructor teaches students how to shoot free throw, it is considered that the teacher show the learner how to use not only the upper limbs but also lower limbs on the basis of the efficent connecting movement and the flexibility in a stable procedure.