• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.53 no.4
• /
• pp.201-204
• /
• 2004

In this paper, a direct adaptive tracking controller based Lyapunov method is designed for a wheeled mobile robots. A wheeled mobile robots have three degrees of freedom and two control variables. Therefore, it is difficult to control a mobile robot using the general linear control. We introduce two kinds of Lyapunov function for the design of the controller and verify the controller. A mobile robots using the designed adaptive direct tracking controller is well-behaved and is easily implemented.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.7
• /
• pp.713-717
• /
• 2014

In this paper, the travel control of the spherical wheeled robot with a mecanum wheel is impelemented. Four typical wheels or three omni wheels are used to consist of the ball-bot. the slip is occured when the typical wheels is used to the ball-bot. In order to reduce these slip, the spherical wheeled robot with macanum wheels is proposed. Through some experiments, we find that the proposed spherical wheeled robot with a mecanum wheel is superior to the conventional spherical wheeled robot with typical wheels.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.4
• /
• pp.567-573
• /
• 2012

Outer rotor type in-wheel Blushless DC Motor(BLDCM) for three-wheeled electric vehicle is researched. In-wheel system is to drive the electric vehicle without mechanical transmission, shaft, differential gears or other mechanical system. The motor is designed considering the performance requirements and drive modes of the vehicle. The determined dimensions as well as the slot and rotor pole are simulated by magnetic and thermal finite element analysis and ansys workbench to analyze the performance and heating of the motor. In order to verify the performance characteristics of the proposed motor, the experiment tests are executed and satisfy well the requirements.

• Journal of Applied Reliability
• /
• v.8 no.3
• /
• pp.135-144
• /
• 2008

The economic life for three types of military wheeled vehicles with load capacities of 1/4, $1{\cdot}1/4$, and $2{\cdot}1/2$ tones has been evaluated on the basis of the equivalent acquisition and operating costs. The economic life of wheeled vehicles were calculated from 12 to 18 years by using the annual equivalent cost method. The equivalent cost was decided at the lowest point of the total amount of equivalent acquisition cost and operating cost. The operating cost were collected from the field data. The evaluated economic life can be very useful for deciding the total life cycle of these three types of military vehicles. The annual equivalent cost method may be also applied to other military equipments such as communication electronics, weapon systems, and other type of vehicles.

• International Journal of Control, Automation, and Systems
• /
• v.1 no.3
• /
• pp.376-384
• /
• 2003

In this paper, the simple geometric kinematics of a three-wheeled holonomic mobile robot is proposed. Wheel architecture is developed for the holonomic mobile platform in order to provide omni-directional motions by three individually driven and steered wheels. Three types of basic motions are proposed for the path generation of the developed mobile robot. All paths of the mobile robot can be achieved through a combination of the proposed basic motion trajectories. The proposed method is verified through computer simulations and the developed mobile robot.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.4 s.316
• /
• pp.35-41
• /
• 2007

In this paper a single-wheeled robot called GYROBO is built and its hardware is implemented. The single-wheeled robot is similar to a rolling disk relying on gyroscopic motions to maintain its balance. The GYROBO consists of three actuators: a spin motor a tilt motor, and a drive motor. The spin motor spins a flywheel at a high rate so that it provides the balancing stability to upright the robot. The tilt motor controls steering of the robot by gyroscopic effect. The drive motor makes forward accelerated motion to the robot. Several models are designed. Experimental works of the GYROBO to turn and move forward have been presented.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.12
• /
• pp.1235-1240
• /
• 2006

Previous isotropy analysis of a caster wheeled omnidirectional mobile robot(COMR) has been made under the assumption that the steering link offset is equal to the caster wheel radius. Nevertheless, many practical COMR's in use take advantage of the steering link offset different from the wheel radius, mainly because of improved stability. This paper presents the isotropy analysis of a fully actuated COMR with variable steering link offset, which can be considered as the generalization of the previous analysis. First, the kinematic model of a COMR under full actuation is obtained based on the orthogonal decomposition of the wheel velocities. Second, the necessary and sufficient conditions for the isotropy of a COMR are derived and examined to categorize three different groups, each of which can be dealt with in a similar way. Third, for each group, the isotropy conditions are further explored so as to identify all possible isotropic configurations completely.

• International Journal of Control, Automation, and Systems
• /
• v.1 no.1
• /
• pp.35-42
• /
• 2003

This paper proposes a simple, robust, nonlinear controller based on Lyapunov stability for tracking the reference welding path and velocity of a two-wheeled welding mobile robot (WMR). The system has three degrees of freedom including two wheels and one torch slider. Torch slider motion is used for faster tracking because the welding speed is very slow. Control law is obtained from the Lyapunov control function to ensure the asymptotical stability of the system. The controller has three free parameters for adjusting the performance of the controlled system. A simple way of measuring the errors using two potentiometers is introduced. The effectiveness of the proposed controller is shown through simulation results.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.5
• /
• pp.65-73
• /
• 2001

In this paper, a mobile system using multi-wheel steering and driving mechanism is proposed to maximize maneuverability of the wheeled mobile system. Among various possible configurations, the two-wheel steering and driving systems, which is minimal in structural requirement, is proposed to reduce the complexity in actual design and difficulties in control. The system possesses three or four degrees of freedom depending on the orientations of two wheels, one or two for driving and two for steering, which implies that the system's mobility is always less than three DOF. The proposed system, nonetheless, can exactly emulate characteristics of the omnidirectional motion as long as the planned path is smooth i.e., the curvature changes continuously while velocity is not zero. Efficient kinematic and dynamic control algorithms are proposed for position and orientation control of the proposed wheeled mobile system.

• Journal of Biosystems Engineering
• /
• v.41 no.4
• /
• pp.288-293
• /
• 2016

Purpose: The purpose of this study was to investigate the key factors in designing a three-wheeled two-row soybean reaper (riding type) that is suitable for soybean production, and ensure worker safety by proposing optimal work conditions for the prototype of the designed machine in relation to the slope of the road. Methods: A three-wheeled two-row soybean reaper (riding type) was designed and its prototype was fabricated based on the local soybean-production approach. This approach was considered to be closely related to the prototype-designing of the cutter and the wheel driving system of the reaper. Load distribution on the wheels of the prototype, its minimum turning radius, static lateral overturning angle, tilt angle during driving, and The working and rear overturning (back flip) angle were measured. Based on the gathered information, investigations were conducted regarding optimal work conditions for the prototype. The investigations took into account driving stability and worker safety. Results: The minimum ground clearance of the prototype was 0.5 m. The blade height of the prototype was adjusted such that the cutter was operated in line with the height of the ridges. The load distribution on the prototype's wheels was found to be 1 (front wheel: F): 1.35 (rear-left wheel: RL): 1.43 (rear-right wheel: RR). With the ratio of load distribution between the RL and RR wheels being 1: 1.05, the left-to-right lateral loads were found to be well-balanced. The minimum turning radius of the prototype was 2.0 m. Such a small turning radius was considered to be beneficial for cutting work on small-scale fields. The sliding of the prototype started at $25^{\circ}$, and its lateral overturning started at $39.3^{\circ}$. Further, the critical slope angle for the worker to drive the prototype in the direction of the contour line on an incline was found to be $12.8^{\circ}$, and the safe angle of slope for the cutting was measured to be less than $6^{\circ}$. The critical angle of slope that allowed for work was found to be $10^{\circ}$, at which point the prototype would overturn backward when given impact forces of 1,060 N on its front wheel. Conclusions: It was determined that farmers using the prototype would be able to work safely in most soybean production areas, provided that they complied with safe working conditions during driving and cutting.