본 연구에서는 섬유혼입률이 초고강도 강섬유보강 콘크리트의 인장연화거동 특성에 미치는 영향을 파악하고자 하였다. 노치 낸 보에 대한 3점 재하 휨실험을 통해 초고강도 강섬유보강 콘크리트의 휨인장 거동을 구하고, Uchida 등이 제안한 역해석법을 사용하여 휨 실험 결과로부터 인장연화곡선을 도출하였다. 노치 낸 보의 휨 실험 결과에서 초기강성은 섬유혼입률에 관계없이 일정한 값을 나타내고, 강섬유의 혼입률이 증가할수록 초고강도 강섬유보강 콘크리트의 휨인장강도는 증가하며 연화거동은 일정 균열폭에서 점근적으로 수렴하는 경향을 나타내었다. 역해석을 통해 구한 인장연화곡선으로부터 섬유혼입률과 임계균열폭, $\omega_0$의 함수로 인장연화모델을 제안하였으며, 인장연화모델은 균열이 진행됨에 따라 일정한 인장응력 값을 가지는 소성구간과 지수함수로 주어지는 연화구간으로 나누어 제시하였다. 본 연구에서 제시한 인장연화모델을 적용하여 점성균열모델을 이용한 유한요소해석을 수행한 결과, 해석 결과와 실험 결과와 잘 일치하는 것으로 나타났다.
Statement of problem: The esthetic component of dental care has become increasingly more important, while new tooth-colored materials are continually marketed. Various new indirect composite materials have been developed with required advantages. The most recent development in the indirect composites has been the introduction of the second-generation laboratory composite or poly-glass materials. They are processed by different laboratory techniques based on combinations of heat, pressure, vacuum and light polymerization. Although, second generation products became available in 1995, their characteristics and clinical performance have not been adequately investigated. Purpose: The aim of this study was to measure the mechanical properties of the second generation indirect resin system and compare these with an existing universal direct composite resin. Material and method: In this study four indirect composite material (Adoro LC, BelleGlass HP, Tescera, Synfony) were tested for flexural strength, wear resistance, hardness and their degree of conversion against Z250, a light cure direct composite. Results: Within the limitations of this study, the following conclusions were drawn: 1. From the abrasion wear result, Adoro showed the least volume loss while Synfony showed the greatest volume loss. Z250 and BelleGlass HP didn't show significant difference (p>0.05), but they showed significant difference with other groups (p<0.05). From the attrition wear, BelleGlass HP showed the least volume loss and it didn’t show significant difference with Tescera (p>0.05). While Synfony showed the greatest volume loss that it showed significant difference with other groups (p>0.05). 2. Mean values of flexural strength by means of three point bending test was in the order of Z250, Adoro, Belleglass HP, Tescera and Synfony. Mean elastic modulus was in the order of Z250, BelleGlass HP, Tescera, Adoro and Synfony. 3. The result of Vicker‘s microhardness value showed that significantly higher value in Z250 (p<0.05), and is in the order of BelleGlass HP, Tescera, Adoro and Synfony. 4. The degree of conversion measured by FT-IR showed significantly higher value in BelleGlass HP (p<0.05), and is in the order of Adoro, Synfony, Tescera and Z250. Conclusion: Significant differences were found in the flexural strength, wear resistance, hardness and their degree of conversion.
본 연구에서는 열중합 의치상 레진에 유리 섬유, 아라미드 섬유, 폴리에틸렌 섬유를 2.6%, 5.3% 부피비로 첨가하여 섬유의 종류에 따른 강화효과를 평가하고, 각 섬유를 두 가지로 조합한 hybrid FRC를 제작하여 동일 함량의 단독 섬유 FRC보다 굴곡성질이 더 우수한지 평가하고자 하였다. 단독 섬유 FRC에서는 5.3% 부피비의 GL, PE 섬유군의 굴곡강도가 높게 나타났다. 두 가지 섬유 조합FRC의 굴곡강도는 단독 섬유 FRC보다 증가하는 양상을 보였으나, 5.3% GL, PE 섬유군과 유의한 차이가 없었다. 단독 섬유 FRC의 굴곡계수는 5.3% 부피비의 GL 섬유군이 가장 높게 나타났다. 두 가지 섬유 조합FRC의 굴곡계수는 단독 섬유 FRC의 5.3% GL 섬유군보다 높게 나타나 유의한 차이를 보였다. 열중합 의치상 레진의 강화를 위해 섬유를 단독으로 이용할 경우 5.3% 부피비로 첨가한 유리 섬유가 굴곡강도와 굴곡계수 면에서 효과적으로 적용될 수 있을 것으로 본다. 두 가지 섬유 조합FRC의 경우 굴곡강도 면에서는 강화효과가 크지 않았지만, 굴곡계수 면에서 볼 때 유리섬유를 하방에 아라미드 섬유를 그 상방에 위치 시킨 조합을 의치상의 강화에 효과적으로 적용할 수 있을 것으로 본다.
Albasarah, Sara;Al Abdulghani, Hanan;Alaseef, Nawarah;al-Qarni, Faisal D.;Akhtar, Sultan;Khan, Soban Q.;Ateeq, Ijlal Shahrukh;Gad, Mohammed M.
The Journal of Advanced Prosthodontics
/
제13권4호
/
pp.226-236
/
2021
PURPOSE. This study aimed to evaluate the effect of incorporating zirconium oxide nanoparticles (nano-ZrO2) in polymethylmethacrylate (PMMA) denture base resin on flexural properties at different material thicknesses. MATERIALS AND METHODS. Heat polymerized acrylic resin specimens (N = 120) were fabricated and divided into 4 groups according to denture base thickness (2.5 mm, 2.0 mm, 1.5 mm, 1.0 mm). Each group was subdivided into 3 subgroups (n = 10) according to nano-ZrO2 concentration (0%, 2.5%, and 5%). Flexural strength and elastic modulus were evaluated using a three-point bending test. One-way ANOVA, Tukey's post hoc, and two-way ANOVA were used for data analysis (α = .05). Scanning electron microscopy (SEM) was used for fracture surface analysis and nanoparticles distributions. RESULTS. Groups with 0% nano-ZrO2 showed no significant difference in the flexural strength as thickness decreased (P = .153). The addition of nano-zirconia significantly increased the flexural strength (P < .001). The highest value was with 5% nano-ZrO2 and 2 mm-thickness (125.4 ± 18.3 MPa), followed by 5% nano-ZrO2 and 1.5 mm-thickness (110.3 ± 8.5 MPa). Moreover, the effect of various concentration levels on elastic modulus was statistically significant for 2 mm thickness (P = .001), but the combined effect of thickness and concentration on elastic modulus was insignificant (P = .10). CONCLUSION. Reinforcement of denture base material with nano-ZrO2 significantly increased flexural strength and modulus of elasticity. Reducing material thickness did not decrease flexural strength when nano-ZrO2 was incorporated. In clinical practice, when low thickness of denture base material is indicated, PMMA/nano-ZrO2 could be used with minimum acceptable thickness of 1.5 mm.
본 연구는 전기도금을 이용하여 교정용 선재의 직경을 증가시킨 후 그 물성 변화를 알아봄으로써 이의 임상적 적용 가능성을 알아보고자 시행되었다. 0.016 인치 스테인레스 스틸 교정용 선재에 전기도금을 위한 적절한 전처리를 시행한 후, 황산 니켈 100g/L, 염화니켈 60g/L, 붕산 30g/L, 염화나트륨 50g/L의 조성을 가지는 전해액을 제조하여 1.7V의 전압과 $25\~29^{\circ}$의 온도, $3.1\~3.3pH$의 조건 하에서 직경을 0.002 인치 증가시켜 0.018 인치 직경의 선재로 만들었다 전기도금 과정 중 1분 단위로 직경을 측정하여 시간에 따른 직경 증가율을 구하였고, 도금 후 서로 다른 세 지점의 직경을 계측하여 균일성을 평가하였으며, 도금 금속의 정성분석을 위하여 X-선 회절검사를 시행하였다. 도금층의 밀착성 증진을 위해 $400^{\circ}$의 전기로에서 10분간 열처리를 시행한 후 도금 전후와 열처리 전후의 물성 변화를 알아보기 위하여 3점 굴곡 실험을 시행하여 다음과 같은 결과를 얻었다. 1.전반적인 하중-변형률 곡선을 보면 0.016인치 군과 0.018인치 군 사이에 도금 처리한 군이 존재하였으며 열처리한 경우가 0.018 인치 군에 더욱 가까워지는 양상을 보였다. 2. 도금에 이해 지경은 0.002이차 증가시킨 군이 기존의 0.016이차 군에 비하여 강성과 항복강도 극한강도 모두 증가하는 경향을 보였으며 이중 강성과 극한 강도는 통계적으로 유의한 차이를 보였다. 3. 0.016인치에서 도금에 의해 직경을 0.002인치 증가시킨 군이 기존의 0.018인치 군보다 강성과 항복강도, 극한강도 모두에서 낮게 나타났으며 통계적 유의차를 보였다. 4. 도금 후 열처리를 시행한 군이 시행하지 않은 군보다 강성, 항복강도, 극한강도 모두 높은 경향을 보였으며, 극한강도에서 유의한 차이를 나타내었다. 5. 전기도금 후 서로 다른 세 지점의 직경차이는 $0.1\~0.3\%$로 균일하게 나타났으며 통계적으로도 유의차가 존재하지 않았다.
목적: 본 연구에서는 지르코니아 수복물의 접착에 사용되는 레진 시멘트의 파괴인성을 측정하고 각 레진 시멘트의 다양한 수중 보관 기간이 파괴 인성에 미치는 영향에 관하여 알아보고자 하였다. 재료 및 방법: 세가지 종류의 레진 시멘트(Panavia F2.0, Clearfil SA luting, Zirconite)를 사용하여 single edge notched 형태의 시편($3mm{\times}6mm{\times}25mm$)을 제작하였다. 각 시편은 $37^{\circ}C$ 증류수에서 1일 (대조군), 30일, 90일, 180일 동안 보관하였다 (n=5). 만능시험기를 이용하여 0.1 mm/s 속도로 삼점굽힘 시험을 시행하고, 파절 시의 최대하중으로 파괴인성($K_{IC}$)을 계산하였다. 측정값은 일원분산분석과 다중분석을 위한 $Scheff{\acute{e}}$ test를 사용하였고, 유의수준은 0.05로 하였다. 결과: 대조군에서 Panavia F2.0가 $3.41{\pm}0.64MN{\cdot}m^{-1.5}$로 가장 높은 $K_{IC}$를 보였으며 Zirconite가 $3.07{\pm}0.41MN{\cdot}m^{-1.5}$, Clearfil SA luting이 $2.58{\pm}0.30MN{\cdot}m^{-1.5}$으로 가장 낮은 $K_{IC}$를 보였으나, 재료간에 유의성 있는 차이는 없었다. 수중보관 기간이 증가함에 따라 Panavia F2.0의 값은 감소였고, Clearfil SA luting과 Zirconite는 증가하였으나, 통계적으로 유의한 차이를 보이지 않았다. 결론: 지르코니아 수복물 전용 레진 시멘트의 파괴인성은 다른 일반 시멘트에 비해 대체로 높으며, 이러한 파괴인성은 수중 보관에 영향을 받지 않는다.
본 연구의 목적은 KURT 화강암 시료의 포화유무에 따른 균열손상 기준과 파괴인성의 변화를 측정하는 것이다. 이를 위하여 일축압축시험을 이용한 소성체적변형률을 통해 KURT 화강암의 균열손상 기준을 도출하였다. 또한 암석의 파괴인성을 보다 신뢰성 있게 측정하기 위해 암석의 비선형적 변형에 대한 보정(Level II Method; ISRM, 1988) 을 통해 포화유무에 따른 KURT 화강암의 수정 파괴인성(corrected fracture toughness)을 측정하였다. 시험결과 건조시료의 평균 균열개시 응력(σci)과 균열손상 응력(σcd)은 91.1 MPa과 128.7 MPa이었으며, 포화시료의 평균 균열개시 응력(σci)과 균열손상 응력(σcd)은 58.2 MPa과 68.2 MPa이었다. 건조시료에 비해 포화시료의 균열개시 응력은 36% 감소하였으며 균열손상 응력은 건조시료 대비 47%나 감소되는 결과를 나타내었다. 균열손상 응력(σcd)이 상대적으로 더욱 감소하였음을 감안할 때 시료의 포화로 인해 더 낮은 응력조건에서 구조물에 대한 손상이 쉽게 발생할 수 있음을 알 수 있다. KURT 화강암의 비선형성을 고려한 수정 파괴인성은 0.811 MPa·m0.5이었으며 포화시료의 수정 파괴인성은 0.620 MPa·m0.5이었다. 즉 암석의 비선형성을 고려함으로써 파괴인성의 증가를 확인할 수 있었으며, 암석의 포화시 수정 파괴인성은 24% 감소하였다. 따라서 지하수 포화로 인해 암석 내 균열의 생성과 진전에 대한 저항성이 감소함을 알 수 있다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.