• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.2029-2034
• /
• 2004

Spiral jet is characterized by a wide region of the free vortex flow with a steep axial velocity gradient, while swirl jet is largely governed by the forced vortex flow and has a very low axial velocity at the jet axis. However, detailed generation mechanism of spiral flow components is not well understood, although the spiral jet is extensively applied in a variety of industrial field. In general, it is known that spiral jet is generated by the radial flow injection through an annular slit which is installed at the inlet of a conical convergent nozzle. The present study describes a computational work to investigate the effects of annular slit on the spiral jet. In the present computation, a finite volume scheme is used to solve three dimensional Naver-Stokes equations with RNG ${\kappa}-{\varepsilon}$ turbulent model. The annular slit width and the pressure ratio of the spiral jet are varied to obtain different spiral flows inside the conical convergent nozzle. The present computational results are compared with the previous experimental data. The results obtained obviously show that the annular slit width and the pressure ratio of the spiral jet strongly influence the characteristics of the spiral jets, such as tangential and axial velocities.

• 대한기계학회논문집B
• /
• 제21권7호
• /
• pp.849-861
• /
• 1997

In this study, the effect of hole geometry of the cooling system on the flow and temperature field was numerically calculated. The finite volume method was employed to discretize the governing equation based on the non-orthogonal coordinate with non-staggered variable arrangement. The standard k-.epsilon. turbulence model was used and also the predicted results were compared with the experimental data to validate numerical modeling. The predicted results showed good agreement in all cases. To analyze the effect of the discharge coefficient for slots of different length to width, the inlet chamfering and radiusing holes were considered. The discharge coefficient was increased with increment of the chamfering ratio, radiusing ratio and slot length to width and also the effect of radiusing showed better result than chamfering in all cases. In order to analyze the difference between the predicted results with plenum region and without plenum region, the velocity profiles of jet exit region for a various flow conditions were calculated. The normal velocity components of jet exit showed big difference for the low slot length to width and high blowing rate cases. To analyze the flow phenomena injected from a row of inclined holes in a real turbine blade, three dimensional flow and temperature distribution of the region including plenum, hole and cross stream with flow conditions were numerically calculated. The results have shown three-dimensional flow characteristics, such as the development of counter rotating vortices, jetting effect and low momentum region within the hole in addition to counter rotating vortex structure in the cross stream.

• 대한조선학회논문집
• /
• 제54권6호
• /
• pp.515-521
• /
• 2017

Large Cavitation Tunnel (LCT) of KRISO enables us to conduct cavitation tests of the propeller attached to a ship model. As the ship model tests are done at rather high Reynolds number of 107~108, flow measurement system such as pitot tube cannot be employed because of structural safety problems in its system and difficulties in installing it within the test section. Thus, KRISO has developed new 3-D LDV system used in large test section of LCT. There are several difficulties in using 3-D LDV, which did not allow efficient operation of it. The first trouble was the calibration using the conventional pin hole. To make the focus with same laser-beam waists at the wanted position, the high spatial resolution CCD is utilized in the calibration procedure for 3-D LDV. The off-axis configuration provides two velocity components in the horizontal plane and on-axis configuration gives third velocity component in the vertical plane. The horizontal velocity components are also obtained in the coincidence mode, which prevents any misleading results in the off-axis configuration. The nominal wake of Aframax tanker model is measured by the developed 3-D LDV system. The measured hull wake showed good agreement with that obtained by CFD calculation.

• 한국수자원학회논문집
• /
• 제44권6호
• /
• pp.429-438
• /
• 2011

In order to simulate a free surface flow in a trench channel, a three-dimensional incompressible unsteady Reynolds-averaged Navier-Stokes (RANS) equations are closed with the ${\kappa}-{\epsilon}$ model. The artificial compressibility (AC) method is used. Because the pressure fields can be coupled directly with the velocity fields, the incompressible Navier-Stokes (INS) equations can be solved for the unknown variables such as velocity components and pressure. The governing equations are discretized in a conservation form using a second order accurate finite volume method on non-staggered grids. In order to prevent the oscillatory behavior of computed solutions known as odd-even decoupling, an artificial dissipation using the flux-difference splitting upwind scheme is applied. To enhance the efficiency and robustness of the numerical algorithm, the implicit method of the Beam and Warming method is employed. The treatment of the free surface, so-called interface-tracking method, is proposed using the free surface evolution equation and the kinematic free surface boundary conditions at the free surface instead of the dynamic free surface boundary condition. AC method in this paper can be applied only to the hydrodynamic pressure using the decomposition into hydrostatic pressure and hydrodynamic pressure components. In this study, the boundary-fitted grids are used and advanced each time the free surface moved. The accuracy of our RANS solver is compared with the laboratory experimental and numerical data for a fully turbulent shallow-water trench flow. The algorithm yields practically identical velocity profiles that are in good overall agreement with the laboratory experimental measurement for the turbulent flow.

• 대한기계학회논문집A
• /
• 제38권10호
• /
• pp.1125-1131
• /
• 2014

복합 구조물의 충격 진동 특성을 이용한 취약성 분석 기법을 제안하였다. 프레임 요소로 구성된 구조물의 충격 거동을 파악하기 위해서 스펙트럴요소법을 적용하였다. 티모센코 보함수를 이용해 고속충돌에 의한 고주파 성분을 포함하는 충격파 전파 특성을 시뮬레이션하였다. 구조물의 결합부분에서는 종방향과 횡방향 파동의 상호 작용을 고려한 파동 전달을 해석하였다. 충격력이 구조물에 작용할 경우 주파수 및 시간 응답을 얻고 전체 구조물에서 충격에너지 전파 특성을 파악하였다. 구조물의 위치별로 계산된 최대가속도 크기와 시스템을 구성하는 주요 부품의 허용 가속도 기준에 의한 취약확률 함수를 정의하고 시스템의 취약 확률을 계산하였다. 제안된 취약성 분석 절차를 이용해 3 차원 전투 차량의 충격 응답을 얻고 충격에 취약한 구조물 위치를 파악하였다.

• 지구물리와물리탐사
• /
• 제21권1호
• /
• pp.33-40
• /
• 2018

이 연구는 한국, 중국, 일본을 포함하는 동아시아 지역의 지각과 최상부맨틀의 SV파 및 SH파 속도구조와 지진파의 속도 방사 이방성(radial anisotropy)을 알아보기 위해 수행하였다. IRIS (Incorporate Research Institutions for Seismology)에서 동아시아에 설치한 광대역 지진관측소에 기록된 지진자료를 사용하여 레일리파와 러브파를 추출하였으며, MFT (Multiple Filter Technique)을 사용하여 각 성분에 기록된 주기 3 ~ 200초 범위의 레일리파와 러브파의 군속도 분산자료를 획득하였다. 수직성분에서 62466개의 레일리파의 분산곡선 측정값을, 접선(transverse)성분에서 54141개의 러브파의 분산곡선 측정값을 얻을 수 있었다. 얻어진 분산자료를 역산하여 속도모델을 구하였고, 역산된 모델을 통해 깊이 100 km 까지의 SV파 및 SH파 속도 구조를 구하였다. SV파와 SH파 속도구조의 경우, 동일하게 깊이 30 km 까지 동해에서 강한 고속도 이상이 나타나며, 30 km 이상의 깊이에서는 중국 남서쪽의 티벳 고원에서 강한 저속도 이상이 나타난다. SH파 속도구조의 경우, 30 km 이상의 깊이에서 동해에서 상대적으로 더 강한 저속도 이상이 나타난다. 그 결과, 지진파 이방성은 평균적으로 동해지역에서 음의 이방성을, 중국 내륙지역에서 양의 이방성이 관측된다.

• 한국수자원학회논문집
• /
• 제51권11호
• /
• pp.971-976
• /
• 2018

관망의 해석은 관망의 설치, 운영에서 매우 중요한 요소이다. 이를 위한 연구 방법은 1차원 모형과 3차원 모형이 있으나 각각은 정확도와 계산속도의 면에서 관망 해석에 장점과 한계점을 보인다. 2차원 모형의 경우 1차원 모형과 달리 난류 점성을 이용하여 보다 정확한 마찰을 모의할 수 있게 하는데, 이때 사용되는 난류 점성을 모의하는 모형은 Five-Region Turbulence Model을 이용하였다. 그러나 이들 모형에 사용되는 매개 변수들은 실험에 의한 값이기 때문에 이러한 매개변수에 따른 2차원 부정류 해석 방법의 응답 특성을 알아보았다. 이를 위해 실제 상수관망에서의 수격압 데이터와 부정류 해석 모형으로 부터의 수격압 데이터를 비교하고, 다양한 매개변수에 따른 속도 분포 모의 특성을 조사하였다. 이를 통해서, 난류해석 모형의 마찰 거동과 매개변수와의 관계를 규명하였다.

• 대한기계학회논문집B
• /
• 제35권7호
• /
• pp.685-691
• /
• 2011

본 연구는 도플러 광 단층촬영법이 미세유동 및 미세구조를 동시에 측정하는 첨단 장비임을 보일뿐 아니라 기존의 도플러 광 단층촬영법의 한계를 극복한 새로운 방법을 제시하였다. 기존의 도플러 광단층촬영법은 샘플로 입사되는 광과 같은 방향의 속도성분만을 측정할 수 있다. 본 연구에서는 임의의 속도벡터의 세 성분을 동시에 측정할 수 있는 다관점 도플러 광 단층촬영법을 개발하였고 심전도 게이트를 사용하여 맥동혈류유동의 3 차원 공간 내에서 위상속도 벡터장을 측정하는 심전도 게이트 다관점 도플러 광 단층촬영법의 타당성 조사를 햄스터 모래주머니 모델을 사용하여 수행하였다. 이를 통해 측정 가능한 속도성분의 수를 증가할 뿐 아니라 프레임 레이트가 심박에 비해 상대적으로 느리기 때문에 발생하는 엘리아싱 문제를 해결하였다.

• 해양환경안전학회지
• /
• 제5권2호
• /
• pp.35-44
• /
• 1999

High negative pressure coefficient is formed in the corner of the bluff body structures. For many curtain wall designers this phenomena is of interest because this high negative pressure coefficient is adopted in structural calculation. The present study is aimed to investigate shedding vortex characteristics of two-dimensional rectangular prism flow. Unsteady calculation by finite difference method based upon SOLA is carried out for three aspect ratios(1:1, 1:2, 1:3) of Re=10$^4$ in viscous incompressible flow within infinite domain. Fluctuation of velocity components at various pick-up points and time variation of drag and lift coefficients are analysed by FFT method to reveal shedding vortex frequency patterns. At aspect ratio 1:1, one primary Strouhal number appears for about all pick-up points. At aspect ratio 1:2, two representative Strouhal numbers are classified by pick-up positions and their flows show two different reattachment patterns. For aspect ratio 1:3, frequency spectrum maintains multiple peaks.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1999년도 춘계 학술대회논문집
• /
• pp.66-72
• /
• 1999

A numerical simulation method has been under development for solving turbulent flows around a ship model in maneuvering motion using the Reynolds Averaged Navier-Stokes equations. The method used second-order finite differences, collocated grids, pressure-Poisson equation and four-stage Runge-Kutta scheme as key components of the solution method. A modified Baldwin-Lomax model is used for the turbulence closure. This paper presents a preliminary result of the computational study on turbulent flows past a ship model in drift motion. Calculations are carried out for a Series 60 $C_B=0.6$ ship model, for which detailed experimental data are available. The results of the present calculations are compared with the experimental data for hydrodynamic forces acting on the model as well as velocity distributions at longitudinal sections. Only fair agreements has been achieved. The computational results show the complex asymmetrical shear flow patterns including three-dimensional separations followed by formation of bilge vortices both in bow and stern regions.