• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.12
• /
• pp.1150-1158
• /
• 2010

In this study, the Polynomial-based Radial Basis Function Neural Networks is proposed as one of the recognition part of overall face recognition system that consists of two parts such as the preprocessing part and recognition part. The design methodology and procedure of the proposed pRBFNNs are presented to obtain the solution to high-dimensional pattern recognition problem. First, in preprocessing part, we use a CCD camera to obtain a picture frame in real-time. By using histogram equalization method, we can partially enhance the distorted image influenced by natural as well as artificial illumination. We use an AdaBoost algorithm proposed by Viola and Jones, which is exploited for the detection of facial image area between face and non-facial image area. As the feature extraction algorithm, PCA method is used. In this study, the PCA method, which is a feature extraction algorithm, is used to carry out the dimension reduction of facial image area formed by high-dimensional information. Secondly, we use pRBFNNs to identify the ID by recognizing unique pattern of each person. The proposed pRBFNNs architecture consists of three functional modules such as the condition part, the conclusion part, and the inference part as fuzzy rules formed in 'If-then' format. In the condition part of fuzzy rules, input space is partitioned with Fuzzy C-Means clustering. In the conclusion part of rules, the connection weight of pRBFNNs is represented as three kinds of polynomials such as constant, linear, and quadratic. Coefficients of connection weight identified with back-propagation using gradient descent method. The output of pRBFNNs model is obtained by fuzzy inference method in the inference part of fuzzy rules. The essential design parameters (including learning rate, momentum coefficient and fuzzification coefficient) of the networks are optimized by means of the Particle Swarm Optimization. The proposed pRBFNNs are applied to real-time face recognition system and then demonstrated from the viewpoint of output performance and recognition rate.

• Journal of Fashion Business
• /
• v.14 no.4
• /
• pp.91-101
• /
• 2010

This paper has the purpose of suggesting a development-method on the fashion products that would secure the competitiveness in the global markets through creating supersensitive practical products on the basis of developing originative fashion-goods being made of jacquard that is fine quality of couture. This paper has collected data through the cases of the developed nations in fashion, precedent studies and all the related literature on the subject. The results of this researching are as following: The first, it is expected that the necessity of developing new fashion products would be appealed toward the prestige group of consumers who are seeking for the fine quality and super-sensitivity in female fashion in Korea, and it is the current situation that the products made of jacquard are gradually expanding not only in the area of apparel, fashion goods and interior but also another areas. The current situation of the global market suggests the necessary strategy of survival, that is, the development of supersensitive materials and creative products which would be able to keep the high quality and lower the selling price through cost reduction. The second, the suggestion of the direction in developing the products of the female fashion made of jacquard has two points - the development of the texture that would realize a unique form and the development of the material that would be able to realize planar pattern and three dimensional pattern which are woven with thin and light materials with various solidity and delicacy through various techniques of mixing and three dimensional expression. The third, the expected ripple effect and utilization generated from the development of fashion products are as followings: As material characteristics of jacquard, It needs the specialization of various techniques and specialized production system in using jacquard, and the specialized technique and system would make it possible to produce not only the higher value-added products through expressing affluent colors and delicate design but also competitive products through cutting the process and cost, eventually, it would lead to the expansion of the jacquard market of super-sensitive prestige. Therefore, it is remarkable that various development of products toward the global market and the prestige female fashion market can suggest the vision that make the national fashion industry develop into the higher value-added knowledge industry integrating technology and culture.

• Journal of the Korean Home Economics Association
• /
• v.43 no.10 s.212
• /
• pp.179-190
• /
• 2005

The purpose of this study was to apply the three dimensional Replica method to the fabrication of dress forms of plus-sized women to attain proper ease through draping and based on the ease to develop good torso patterns with superior fit. The results were as follows. The physical characteristics of the dress forms of plus-sized women were divided into two: Types I and 11. The proper ease was calculated through draping using dummies of each somatotype and appropriate torso patterns were developed. The differences of the types for each pattern were as follows. The bust girth ease of Type II was 6cm as for Type I. As for the bust breadth 1.0cm was added to the anterior chest width, the armpit width was the actual measurement plus 0.5cm, and the back breadth was the posterior chest width plus 2.5cm. The bust breadth was smaller and the back breadth was bigger that those of Type I after improving the bust and back fit. The bust of Type I protrudes outwards relatively and so the shoulder dart of front-side of Type I was 1.2cm bigger than that of Type II which improved the bust region fit. Considering the characteristics of the protruding abdominal region the front- side waistline of type II was assigned W/4+3.5cm and the back-side waistline W/4cm, so that the sidelines divided the front and back properly. It was drafted so that the center-front became diagonal, thereby improving the middle-hip girth fit.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.8
• /
• pp.933-945
• /
• 2011

This research proposes a pattern design method for 24 pleated skirts in order to develop an automatic draft program for pleated skirts that will enhance fit and enable mass production. The research method and results are outlined as follow. 1. Three-dimensional body measurements were conducted on 30 randomly selected women in their 20s. By using 34 body measurement items and 6 types of calculations among the items, the items required in the designing of an original pleated skirt were extracted. They were then interpreted through correlation analysis, variance analysis, a t-test, linear regression analysis and multiple regression analysis. 2. An extra amount was added to the waist measurement and external capsule measurement according to the number of times the pleats coincided and the thickness of the fabric by the degree of polymerization of the horizontal cross section (the test of this research: 0.518mm). The extra amount of waist measurement was 3.6cm while the hip measurement was 4.3cm larger than the hip measurement combined with the external capsule measurement and the extra amount. 3. Based on the ${\pm}$standard deviation/2 as the average of the difference between the external capsule measurement and waist measurement, the subjects were classified into 3 somatotypes. Somatotype 1 presented an average total length of waist darts of 23.6cm while that of somatotype 2 was 26.2cm and that of somatotype 3 was 30.2cm. It has been confirmed that there is a significant difference among somatotypes in the total length of waist darts from the front center to the front side and the total length of waist darts from the side to the back center in terms of the average amount of waist darts for every 12 parts on the WL.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.3
• /
• pp.8-14
• /
• 1999

The flor characteristics around the KRISO 3600TEU container ship model have been experimentally investigated in a subsonic wind tunnel. The mean velocity and turbulence characteristics in the stern and wake regions were measured using an x-type hot-wire probe. The flow characteristics in the stern and near wake regions revealed a complicated three-dimensional flow pattern. The measured results showed clearly the formation of longitudinal vortices and their effect on the flow pattern in the wake region. The shear layer developed along the ship model expands showly to the downward direction. The turbulence statistics measured can be used as comparative data of numerical simulations and provide insights into development of accurate turbulence models for the ship design.

• International Journal of Precision Engineering and Manufacturing
• /
• v.3 no.3
• /
• pp.37-43
• /
• 2002

Electronic speckle contouring(ESC) based on electronic speckle pattern interferometry is the optical method for measuring object shape by using fringe-projection techniques. This method has the advantages of being non-contact, non-destructive and a whole-field measurement of the surface under investigation. Fringes in ESC represent the difference in depth along the view direction between the master wavefront and the test component. The contour maps of three-dimensional diffuse objects can be obtained by small shifts of optical fiber carrying the dual-object-beams and 4-frame phase shifting. In this study we proposed the contouring method by shifting the collimated illumination beams through optical fiber in order to obtain the contour fringe patterns. And also, we performed the addition of incremental images through the geometrical analysis to obtain the contour fringe interval when we performed the incremental addition of images and experiments based on this method. We obtained both quantitative increment without decorrelation effect and qualitative improvement by reducing the noise of contour fringes.

• Korea-Australia Rheology Journal
• /
• v.19 no.3
• /
• pp.171-176
• /
• 2007

LCD-BLU (Liquid Crystal Display-Back Light Unit) of medium size is usually manufactured by forming numerous dots with $50{\sim}300\;{\mu}m$ in diameter by etching process and V-grove shape with $50\;{\mu}m$ in height by mechanical cutting process. However, the surface of the etched dots is very rough due to the characteristics of the etching process and V-cutting needs rather high cost. Instead of existing optical pattern made by etching and mechanical cutting, 3-dimensional continuous micro-lens of $200\;{\mu}m$ in diameter was applied in the present study. The continuous micro-lens pattern fabricated by modified LIGA with thermal reflow process was tested to this new optical design of LGP. The manufacturing process using LIGA-reflow is made up of three stages as follows: (i) the stage of lithography, (ii) the stage of thermal reflow process and (iii) the stage of electroplating. The continuous micro-lens patterned LGP was fabricated with injection molding and its test results showed the possibility of commercial use in the future.

• Journal of the Korean Solar Energy Society
• /
• v.35 no.1
• /
• pp.69-80
• /
• 2015

A series of numerical analyses was conducted to predict the thermal performance of a solar air heater depending on the hole configuration and geometry in the absorber plate. The planar dimensions of the prototype were 1 m (W) by 1.6 m (H), and the maximum air flow considered was $187m^3/h$. It was considered that protruding holes with a triangular opening in the absorber plate would invoke turbulence in the air flow to enhance the convection heat transfer. Six different hole configurations were investigated and compared with each other, while the hole opening height was considered as a design variable. Three-dimensional transient analyses were performed with a commercial software package on the airflow and heat transfer in the model. The numerical results were analyzed and compared from the view point of the outlet air temperature and its time response to derive the optimal hole pattern and hole opening height.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2009.11a
• /
• pp.20-24
• /
• 2009

Mobile의 기술발달과 보편화에 따라 소비자들은 Mobil이 자기 개성 표현인 액세서리화되고, 더욱 감성적이고 차별화된 디자인을 요구함에 따라, 기업들은 이런 소비자들의 개성화 감성화의 니즈를 표면처리 디자인 기술로 효율적으로 적용해 소비자의 감성만족을 시키려 하고 있다. 국내외 Mobile 시장에서 Metal Case 외장의 2차원적인 디자인패턴은 다양한 표면처리 가공 접근이 용이하지 못하고, 패턴디자인의 한계에 이르렇다. E/F(INLET)의 도금 가공 기술의 Concept은 "원활한 모재의 제품 박리성" 에 있으나, 역발상으로 "Metal 모재와의 밀착성"으로 제품디자인을 구현하여, 제품의 도금 두께층 및 신뢰성 기술 확보함으로, 표면층에 사진, 그림, 인물 풍경, 자연물이미지 등의 다양한 감성디자인패턴의 구현이 가능해졌다. 산업기술자원부의 디자인혁신센터로 중소기업디자인개발 지원을 위해 설립된 중앙대학교 디자인경영센터와 SR I-TECH의 기술력으로 3차원 감성디자인패턴을 개발하게 되었다.

• 한국전산유체공학회:학술대회논문집
• /
• 2001.10a
• /
• pp.70-75
• /
• 2001

This paper presents the results of numerical simulation of wind environment and wind coefficient around super high-rise building. The analysis of aerodynamic response due to wind-induced forces and wind effect to surrounding buildings is important to high-rise building. This paper simulates the wind force to the high-rise building and wind flow pattern around the high-rise building, and shows the usability of CFD analysis to design process of high-rise building. A Navier-Stokes-Solver (FLUENT) with Quick spatial discretization scheme and RNG $\kappa-\epsilon$ turbulence model has been applied to the computation of the three dimensional turbulent flow.