• 제목/요약/키워드: Three-dimensional evaluation

검색결과 1,048건 처리시간 0.032초

Blood-Brain Barrier Disruption in Mild Traumatic Brain Injury Patients with Post-Concussion Syndrome: Evaluation with Region-Based Quantification of Dynamic Contrast-Enhanced MR Imaging Parameters Using Automatic Whole-Brain Segmentation

  • Heera Yoen;Roh-Eul Yoo;Seung Hong Choi;Eunkyung Kim;Byung-Mo Oh;Dongjin Yang;Inpyeong Hwang;Koung Mi Kang;Tae Jin Yun;Ji-hoon Kim;Chul-Ho Sohn
    • Korean Journal of Radiology
    • /
    • 제22권1호
    • /
    • pp.118-130
    • /
    • 2021
  • Objective: This study aimed to investigate the blood-brain barrier (BBB) disruption in mild traumatic brain injury (mTBI) patients with post-concussion syndrome (PCS) using dynamic contrast-enhanced (DCE) magnetic resonance (MR) imaging and automatic whole brain segmentation. Materials and Methods: Forty-two consecutive mTBI patients with PCS who had undergone post-traumatic MR imaging, including DCE MR imaging, between October 2016 and April 2018, and 29 controls with DCE MR imaging were included in this retrospective study. After performing three-dimensional T1-based brain segmentation with FreeSurfer software (Laboratory for Computational Neuroimaging), the mean Ktrans and vp from DCE MR imaging (derived using the Patlak model and extended Tofts and Kermode model) were analyzed in the bilateral cerebral/cerebellar cortex, bilateral cerebral/cerebellar white matter (WM), and brainstem. Ktrans values of the mTBI patients and controls were calculated using both models to identify the model that better reflected the increased permeability owing to mTBI (tendency toward higher Ktrans values in mTBI patients than in controls). The Mann-Whitney U test and Spearman rank correlation test were performed to compare the mean Ktrans and vp between the two groups and correlate Ktrans and vp with neuropsychological tests for mTBI patients. Results: Increased permeability owing to mTBI was observed in the Patlak model but not in the extended Tofts and Kermode model. In the Patlak model, the mean Ktrans in the bilateral cerebral cortex was significantly higher in mTBI patients than in controls (p = 0.042). The mean vp values in the bilateral cerebellar WM and brainstem were significantly lower in mTBI patients than in controls (p = 0.009 and p = 0.011, respectively). The mean Ktrans of the bilateral cerebral cortex was significantly higher in patients with atypical performance in the auditory continuous performance test (commission errors) than in average or good performers (p = 0.041). Conclusion: BBB disruption, as reflected by the increased Ktrans and decreased vp values from the Patlak model, was observed throughout the bilateral cerebral cortex, bilateral cerebellar WM, and brainstem in mTBI patients with PCS.

Evaluation of the correlation between the muscle fat ratio of pork belly and pork shoulder butt using computed tomography scan

  • Sheena Kim;Jeongin Choi;Eun Sol Kim;Gi Beom Keum;Hyunok Doo;Jinok Kwak;Sumin Ryu;Yejin Choi;Sriniwas Pandey;Na Rae Lee;Juyoun Kang;Yujung Lee;Dongjun Kim;Kuk-Hwan Seol;Sun Moon Kang;In-Seon Bae;Soo-Hyun Cho;Hyo Jung Kwon;Samooel Jung;Youngwon Lee;Hyeun Bum Kim
    • 농업과학연구
    • /
    • 제50권4호
    • /
    • pp.809-815
    • /
    • 2023
  • This study was conducted to find out the correlation between meat quality and muscle fat ratio in pork part meat (pork belly and shoulder butt) using CT (computed tomography) imaging technique. After 24 hours from slaughter, pork loin and belly were individually prepared from the left semiconductors of 26 pigs for CT measurement. The image obtained from CT scans was checked through the picture archiving and communications system (PACS). The volume of muscle and fat in the pork belly and shoulder butt of cross-sectional images taken by CT was estimated using Vitrea workstation version 7. This assemblage was further processed through Vitrea post-processing software to automatically calculate the volumes (Fig. 1). The volumes were measured in milliliters (mL). In addition to volume calculation, a three-dimensional reconstruction of the organ under consideration was generated. Pearson's correlation coefficient was analyzed to evaluate the relationship by region (pork belly, pork shoulder butt), and statistical processing was performed using GraphPad Prism 8. The muscle-fat ratios of pork belly taken by CT was 1 : 0.86, while that of pork shoulder butt was 1 : 0.37. As a result of CT analysis of the correlation coefficient between pork belly and shoulder butt compared to the muscle-fat ratio, the correlation coefficient was 0.5679 (R2 = 0.3295, p < 0.01). CT imaging provided very good estimates of muscle contents in cuts and in the whole carcass.

Imaging of Facial Nerve With 3D-DESS-WE-MRI Before Parotidectomy: Impact on Surgical Outcomes

  • Han-Sin Jeong;Yikyung Kim;Hyung-Jin Kim;Hak Jung, Kim;Eun-hye Kim;Sook-young Woo;Man Ki Chung;Young-Ik Son
    • Korean Journal of Radiology
    • /
    • 제24권9호
    • /
    • pp.860-870
    • /
    • 2023
  • Objective: The intra-parotid facial nerve (FN) can be visualized using three-dimensional double-echo steady-state water-excitation sequence magnetic resonance imaging (3D-DESS-WE-MRI). However, the clinical impact of FN imaging using 3D-DESS-WE-MRI before parotidectomy has not yet been explored. We compared the clinical outcomes of parotidectomy in patients with and without preoperative 3D-DESS-WE-MRI. Materials and Methods: This prospective, non-randomized, single-institution study included 296 adult patients who underwent parotidectomy for parotid tumors, excluding superficial and mobile tumors. Preoperative evaluation with 3D-DESS-WE-MRI was performed in 122 patients, and not performed in 174 patients. FN visibility and tumor location relative to FN on 3D-DESS-WE-MRI were evaluated in 120 patients. Rates of FN palsy (FNP) and operation times were compared between patients with and without 3D-DESS-WE-MRI; propensity score matching (PSM) and inverse probability of treatment weighting (IPTW) were used to adjust for surgical and tumor factors. Results: The main trunk, temporofacial branch, and cervicofacial branch of the intra-parotid FN were identified using 3D-DESS-WE-MRI in approximately 97.5% (117/120), 44.2% (53/120), and 25.0% (30/120) of cases, respectively. The tumor location relative to FN, as assessed on magnetic resonance imaging, concurred with surgical findings in 90.8% (109/120) of cases. Rates of temporary and permanent FNP did not vary between patients with and without 3D-DESS-WE-MRI according to PSM (odds ratio, 2.29 [95% confidence interval {CI} 0.64-8.25] and 2.02 [95% CI: 0.32-12.90], respectively) and IPTW (odds ratio, 1.76 [95% CI: 0.19-16.75] and 1.94 [95% CI: 0.20-18.49], respectively). Conversely, operation time for surgical identification of FN was significantly shorter with 3D-DESS-WE-MRI (median, 25 vs. 35 min for PSM and 25 vs. 30 min for IPTW, P < 0.001). Conclusion: Preoperative FN imaging with 3D-DESS-WE-MRI facilitated anatomical identification of FN and its relationship to the tumor during parotidectomy. This modality reduced operation time for FN identification, but did not significantly affect postoperative FNP rates.

개방형 혁신(Open Innovation) 프로젝트에서 소비자 지식의 디지털 트랜스포메이션 과정: 지식의 깊이와 참여 동기 변화의 관계를 중심으로 (Digital Transformation of Customer Knowledge in Open Innovation Project: Focusing on Knowledge Depth and Type Sought)

  • 김규원;이정
    • 경영정보학연구
    • /
    • 제21권4호
    • /
    • pp.197-220
    • /
    • 2019
  • 본 연구는 기업이 생존에 필요한 지식을 외부에서 조달하는 방법 중 하나로서 활용하고 있는 개방형 혁신 프로젝트를 디지털 트랜스포메이션 관점에서 분석하고 있다. 우선, 일반 소비자들이 자신들의 지식을 공유하기 위해 개방형 혁신 프로젝트에 참여할 때, 그들이 갖고 있는 동기를 분류함에 있어 기존의 내재적/외재적 이분법적 분류를 확장하여 동기 형성에 영향을 미치는 '영향자'를 중심으로 자발적 동기, 기업유발 동기, 사회유발 동기 세 가지로 분류하였다. 이러한 새로운 분류는 연결성을 중시하는 현대사회에서 '사회적 동기'가 중요한 의미를 가질 수 있다는 것을 보여준다. 그 결과 경쟁심리, 사회적 기여도 등이 새롭게 사회적 동기로 도출되었으며 그 과정에서, 기업이 프로젝트를 통해 조달하고자 하는 지식의 깊이에 따라 그 동기의 영향력이 달라진다는 가설도 도출되었다. 가설은 두 가지 방식으로 검증되었다. 첫째, 네 가지 개방형 혁신 프로젝트 사례를 조사하여 각 사례에서 강조된 동기들이 무엇이며 어떻게 디지털 트랜스포메이션 현상이 일어났는지 확인하였다. 둘째, 203명의 온라인 게임 사용자를 대상으로 설문을 실시하여 그들이 개방형 혁신 프로젝트에 참여할 경우 갖게 되는 동기에 대해 조사하였다. 그 결과, 동기에 대한 대부분의 가설들이 채택되었으며 필요 지식의 깊이에 따른 조절 효과 역시 있는 것으로 나타났다. 본 연구는 기존의 동기형성 연구가 주로 사용하던 내부, 외부 동기의 이분법을 확장하여 개방형 혁신 프로젝트가 갖는 사회적 영향력 측면을 강조함과 동시에 그 과정을 디지털 트랜스포메이션 관점에서 이해하였다는 점에서 그 의의가 있다.

지하구조물 변위거동에 따른 콘크리트궤도의 손상영향 분석 (Evaluation on Damage Effect of Concrete Track induced by Underground Structure Displacement Behavior)

  • 최정열
    • 문화기술의 융합
    • /
    • 제10권3호
    • /
    • pp.839-844
    • /
    • 2024
  • 본 연구는 인접굴착공사, 지반열화 및 지하수위의 변화에 따른 지하구조물 변위거동이 궤도 손상에 미치는 영향을 해석적으로 분석하였다. 연구대상인 콘크리트궤도는 침목플로팅궤도(STEDEF)와 사전제작형궤도(B2S)를 대상으로 분석하였다. 침목플로팅궤도는 콘크리트 도상과 침목이 분리된 궤도구조이다. 사전제작형궤도는 프리캐스트 슬래브를 이용하여 레일 및 체결장치를 조립하여 레일의 탄성거동을 유도하는 궤도구조이다. 수치해석을 위해 콘크리트 궤도별로 레일부터 콘크리트 도상까지 모두 3차원 요소로 모델링하였다. 또한 지하구조물 변위거동을 변수로 설정하여 콘크리트 도상의 손상영향을 분석하였다. 수치해석을 이용하여 융기 및 침하에 따른 콘크리트 도상 응력을 분석하였으며, 인장강도 및 전단강도와 비교하여 균열 발생 수준을 분석하였다. 분석결과, 동일한 융기 및 침하발생 시 사전제작형궤도보다 침목플로팅궤도가 취약한 것으로 분석되었다. 또한 최대 융기 및 침하부 기준으로 침목플로팅궤도의 균열발생 영향범위가 큰 것으로 분석되었다.

암반의 이방성이 터널 굴착에 미치는 영향에 대한 수치해석적 연구 (A numerical analysis study on the effects of rock mass anisotropy on tunnel excavation)

  • 윤지석;신상혁;김한얼;유한규
    • 한국터널지하공간학회 논문집
    • /
    • 제26권4호
    • /
    • pp.327-344
    • /
    • 2024
  • 일반적인 터널 설계 및 해석 시 암반을 등방성으로 가정하나, 등방성 조건에서는 재료특성이 모든 방향에서 균일하므로 터널의 안정성이 높게 평가되는 경향이 있다. 그러나 실제 암반은 절리, 층리, 단층 등 불연속면이 존재하며 방향에 따라 재료의 특성이 다른 이방성 특징을 가진다. 이러한 암반의 이방성은 터널 굴착 시 발생하는 응력 분포에 큰 영향을 미쳐, 불균일한 터널 변형을 유발하고 손상 위험을 증가시키기 때문에 사전에 철저한 분석이 필요하다. 본 연구에서는 암반의 이방성에 따라 굴착 과정에서 발생하는 막장면과 터널이 굴착된 후 수렴된 위치에서 발생하는 변형과 응력 변화에 초점을 두었다. 탄성계수의 비율(E1/E2)에 따른 이방성지수(IE)와 경사각을 변수로 선정하여 3차원 수치해석을 수행하였다. 결과적으로 이방성 지수가 증가할수록 터널에서 발생하는 변위가 증가하고 응력집중 현상이 크게 발생하였으며, 경사면이 터널과 접하는 부분에서 최대 변위가 발생하고 전단응력이 가장 크게 발생하는 것을 확인하였다.

유방보존술 후 방사선치료에서 수술 흉터와 삽입된 클립을 이용한 전자설 추가 방사선 조사야 평가 (Evaluation of Electron Boost Fields based on Surgical Clips and Operative Scars in Definitive Breast Irradiation)

  • 이레나;정은아;이지혜;서현숙
    • Radiation Oncology Journal
    • /
    • 제23권4호
    • /
    • pp.236-242
    • /
    • 2005
  • 목적: 본 연구에서는 초기 유방암환자에서 보존적 수술 후 전자선을 이용한 추가방사선 조사 시 조사야의 범위 결정에 수술상흔 및 외과적 클립이 미치는 역할을 분석하였으며 이상적인 조사야 범위 결정방법을 제시하였다. 대상 및 방법: 조기 유방암 환자로 병소를 제거한 후 외과적 클립을 $4{\sim}7$개 삽입한 환자 20명을 대상으로 연구를 시행하였다. 전자선의 치료 에너지를 결정하기 위하여 피부에서부터 흉부벽까지의 거리(SCD)와 병변 조직의 가장 뒤쪽에 위치해 있는 클립까지의 거리를 측정하였다. 수술시 삽입된 클립들을 simulation 필름 상에서 연결하여 방사선학적 tumor bed로 정의하였다. 방사선 조사야의 범위는 3가지 방법에 의해 simulation 필름에 그렸다. 임상방사선 조사야(CF)는 수술 상흔 둘레로 3 cm의 여유를 주었고, 외과적방사선 조사야(SF)는 클립주위로 2 cm의 여유를 주었으며, 마지막으로 이상적 방사선조사야(IF)는 수술 상흔과 클립을 모두 포함하여 2 cm의 여유를 주었다. 그려진 조사야들의 면적을 측정하기 위하여 치료계획 컴퓨터에 입력되었고 측정된 면적을 비교하였다. 마지막으로 삽입된 클립들을 CT상에서 그려 넣었고 클립들의 3차원적인 선량분포를 알아보기 위해 선량체적표를 얻었다. 결과: SCD와 가장 깊이 삽입된 clip까지의 거리의 평균차이는 $0.7{\pm}0.56cm$이다. 12명의 환자의 경우 깊이의 차이가 있다. 수술 상흔과 클립들의 평균 위치의 변화는 상방으로 1.7 cm, 하방으로 1.2 cm, 내측으로 1.2 cm, 그리고 외측으로 0.9 cm이다. CF의 면적은 20명의 환자 중 6명의 경우 SF보다 크고 IF보다 크다. SF 와 IF의 면적 차이는 15의 환자에서 5%보다 작다. CF 조사야를 이용할 경우 15명의 환자들에 대해 1개 또는 3개의 클립들을 조사야 내에 포함하지 못하고 있다. 또한 클립들의 선량분포를 볼 때 17명의 환자들이 처방선량의 80% 미만을 받는 즉 선량적으로 부적절한 선량을 받는 클립들이 있었다. 결론: 수술 상흔을 중심으로 방사선 조사야 범위를 결정 할 경우 병변의 상하 부위를 적절히 포함하지 못하므로 병변 조직의 충분한 선량을 전달하지 못하였다. 외과적 클립만을 이용할 경우는 수술 상흔을 모두 포함하지 못하였다. 따라서 결론적으로 즉 수술 상흔과 외과적 클립을 모두 포함하는 본 기관에서 사용하는 방법으로 전자선 추가 조사야를 그린다면 정상조직의 부작용 및 지리상으로 병변조직의 빠트림을 최소화할 수 있을 것이다.

나선형 토모테라피 방사선치료의 환자별 품질관리를 위한 라디오크로믹 필름 및 Dosimetry CheckTM의 성능평가 (Performance Evaluation of Radiochromic Films and Dosimetry CheckTM for Patient-specific QA in Helical Tomotherapy)

  • 박수연;채문기;임준택;권동열;김학준;정은아;김종식
    • 대한방사선치료학회지
    • /
    • 제32권
    • /
    • pp.93-109
    • /
    • 2020
  • 목 적: 나선형 토모테라피 방사선치료를 위한 환자별 품질관리용 라디오크로믹 필름 및 3차원 분석시스템인 Dosimetry CheckTM (DC, MathResolutions, USA)의 성능평가를 시행하였다. 대상 및 방법: 인체모형팬톰(Anderson Rando Phantom, USA)을 이용하여 위치 변이가 있는 3가지 형태의 복부 종양(130.6㎤), 복막 후면 종양(849.0㎤) 및 전 복부 전이 종양(3131.0㎤)을 모델링하였다. 조사면 고정너비(field width, FW)를 2.5-cm, 5.0-cm, 피치(pitch) 0.287, 0.43으로 하여 부위별 4개씩(plan01-plan04), 총 12개의 비교용 치료계획을 수립하였다. 이온전리함(1D)과 라디오크로믹 필름(Gafchromic EBT3, Ashland Advanced Materials, USA)을 치즈팬톰 내 삽입하는 방법(2D)과 빔 플루언스 로그정보를 이용하여 CT영상 위에 선량을 3차원으로 재구성하는 방식의 DC측정을 진행하였다. 스레드효과(thread effect)를 분석을 위해 리플(ripple) 진폭(%)를 계산하였고, 선량 분포의 패턴 분석을 위해 감마인덱스 분석(DD: 3%/DTA: 3mm, 합격 문턱 값: 95%)을 수행하였다. 결 과: 리플 진폭 측정 결과 복막 후면 종양이 평균 23.1%로 가장 높았다. 라디오크로믹 필름의 분석결과, 절대 선량 평균 1.0±0.9%, 감마인덱스분석 평균 96.4±2.2%로 95% 이상 통과하였으나 전 복부 전이 종양과 같이 넓은 부위 평가에 범위의 제한적이었다. 인체모형팬톰에 적용한 DC 분석결과 FW가 5.0-cm인 세 부위의 2D 및 3D 플랜 평균이 91.8±6.4%였다. 세 단면 및 선량 프로파일 분석을 통해 복막 후면 및 전 복부 종양 표적 전체 영역에 분석이 가능하였고, 선량-용적 히스토그램을 통한 계획 선량 대 측정의 선량 오차가 FW 및 pitch에 따라 커지는 것을 확인하였다. 결 론: DC측정방법은 별도의 측정기 없이 조사 중 측정된 빔 플루언스 로그정보만으로 3차원 환자 영상 데이터 위에 선량 오류를 구현할 수 있고 종양의 위치나 크기에 제한이 없어 크고 불규칙한 종양의 나선형 토모테라피의 치료 시 환자별 품질관리 성능이 매우 우수하며 활용도가 높을 것으로 생각한다.

3차원 레이저 스캐너를 이용한 한국 성인 정상교합자의 안면 연조직에 대한 연구 (A study of facial soft tissue of Korean adults with normal occlusion using a three-dimensional laser scanner)

  • 백형선;전재민;이화진
    • 대한치과교정학회지
    • /
    • 제36권1호
    • /
    • pp.14-29
    • /
    • 2006
  • 치과교정영역에서 컴퓨터기술의 발달로 안면 경조직 및 연조직의 3차원적인 분석이 가능해졌으며 이에 따라 교정환자의 진단과 치료계획 및 치료 후에 연조직의 3차원적인 평가가 가능하게 되었다. 그러나 안면 연조직의 3차원적 분석을 위한 표준화된 기준이 없고 임상적용이 가능한 진단 프로그램은 아직 없는 실정이다. 이에 본 연구에서는 3차원 진단 시 유용한 안면 연조직 계측점들의 3차원 계측치(X, Y, Z)를 제시하고, 이를 이용하여 설정된 길이, 각도 및 비율의 정상치를 제시하고자 한다. 3차원 촬영 기구로 비접촉식 3차원 레이저 스캐너를 이용하였으며, 한국 성인 정상교합 자 남녀 각각 30명(남자평균 20.1세, 여자평균 21.7세)을 연구대상으로 하였다. Rapidform 2004 프로그램(Inus Technology Inc., Seoul, Korea)으로 3차원 영상을 만든 후 3차원 입체영상에 soft tissue nasion을 원점으로 하는 좌표계(X축-좌우, Y축-상하, Z축-전후)를 설정하고, 29개의 계측점을 지정한 후 거리계측 45개 항목, 각도 8개 항목, 거리비율 29개 항목을 분석하였다. 각각의 계측점의 3차원 좌표(X, Y, Z)를 구하였으며 이를 바탕으로 각각의 계측항목을 계산하여 표준화하였다. 특히, 각도항목에서 transverse upper lip prominence (Ch(Rt)-ULPm-Ch(Lt))는 남자 $107^{\circ}$, 여자 $106^{\circ}$였고, transverse mandibular prominence (Go'(Rt)-Pog'-Go'(Lt))는 남녀 모두 $76^{\circ}$였다. Naso frontal angle (G-N'-Pn)은 남자 $142^{\circ}$, 여자 $147^{\circ}$, transverse nasal prominence (Zy(Rt)-Pn-Zy(Lt))는 남자 $112^{\circ}$, 여자 $116^{\circ}$로 남녀 간에 통계학적으로 유의차가 있었다 (p<0.05). 하안면고경 하방 2/3 (Li-Me')와 하악체길이(Go'-Me'), 입술고경(ULPm-Li)과 폭경(Ch(Rt)-Ch(Lt))의 비율은 각각 2/5로 나타났다. 관상기준평면에서 안면의 윤곽을 나타내는 계측점인 FT, Zy, Pn, ULPm, Li, Me'까지의 거리의 비는 -1/-1/1/0.5/0.5/-0.6였다. 또한 얻어진 자료를 이용하여 한국 성인 정상교합자의 3차원 안면 모델을 제작하였으며 이는 교정진단 또는 치료결과 비교 시 template로 활용될 수 있으리라 사료된다.

다분류 SVM을 이용한 DEA기반 벤처기업 효율성등급 예측모형 (The Prediction of DEA based Efficiency Rating for Venture Business Using Multi-class SVM)

  • 박지영;홍태호
    • Asia pacific journal of information systems
    • /
    • 제19권2호
    • /
    • pp.139-155
    • /
    • 2009
  • For the last few decades, many studies have tried to explore and unveil venture companies' success factors and unique features in order to identify the sources of such companies' competitive advantages over their rivals. Such venture companies have shown tendency to give high returns for investors generally making the best use of information technology. For this reason, many venture companies are keen on attracting avid investors' attention. Investors generally make their investment decisions by carefully examining the evaluation criteria of the alternatives. To them, credit rating information provided by international rating agencies, such as Standard and Poor's, Moody's and Fitch is crucial source as to such pivotal concerns as companies stability, growth, and risk status. But these types of information are generated only for the companies issuing corporate bonds, not venture companies. Therefore, this study proposes a method for evaluating venture businesses by presenting our recent empirical results using financial data of Korean venture companies listed on KOSDAQ in Korea exchange. In addition, this paper used multi-class SVM for the prediction of DEA-based efficiency rating for venture businesses, which was derived from our proposed method. Our approach sheds light on ways to locate efficient companies generating high level of profits. Above all, in determining effective ways to evaluate a venture firm's efficiency, it is important to understand the major contributing factors of such efficiency. Therefore, this paper is constructed on the basis of following two ideas to classify which companies are more efficient venture companies: i) making DEA based multi-class rating for sample companies and ii) developing multi-class SVM-based efficiency prediction model for classifying all companies. First, the Data Envelopment Analysis(DEA) is a non-parametric multiple input-output efficiency technique that measures the relative efficiency of decision making units(DMUs) using a linear programming based model. It is non-parametric because it requires no assumption on the shape or parameters of the underlying production function. DEA has been already widely applied for evaluating the relative efficiency of DMUs. Recently, a number of DEA based studies have evaluated the efficiency of various types of companies, such as internet companies and venture companies. It has been also applied to corporate credit ratings. In this study we utilized DEA for sorting venture companies by efficiency based ratings. The Support Vector Machine(SVM), on the other hand, is a popular technique for solving data classification problems. In this paper, we employed SVM to classify the efficiency ratings in IT venture companies according to the results of DEA. The SVM method was first developed by Vapnik (1995). As one of many machine learning techniques, SVM is based on a statistical theory. Thus far, the method has shown good performances especially in generalizing capacity in classification tasks, resulting in numerous applications in many areas of business, SVM is basically the algorithm that finds the maximum margin hyperplane, which is the maximum separation between classes. According to this method, support vectors are the closest to the maximum margin hyperplane. If it is impossible to classify, we can use the kernel function. In the case of nonlinear class boundaries, we can transform the inputs into a high-dimensional feature space, This is the original input space and is mapped into a high-dimensional dot-product space. Many studies applied SVM to the prediction of bankruptcy, the forecast a financial time series, and the problem of estimating credit rating, In this study we employed SVM for developing data mining-based efficiency prediction model. We used the Gaussian radial function as a kernel function of SVM. In multi-class SVM, we adopted one-against-one approach between binary classification method and two all-together methods, proposed by Weston and Watkins(1999) and Crammer and Singer(2000), respectively. In this research, we used corporate information of 154 companies listed on KOSDAQ market in Korea exchange. We obtained companies' financial information of 2005 from the KIS(Korea Information Service, Inc.). Using this data, we made multi-class rating with DEA efficiency and built multi-class prediction model based data mining. Among three manners of multi-classification, the hit ratio of the Weston and Watkins method is the best in the test data set. In multi classification problems as efficiency ratings of venture business, it is very useful for investors to know the class with errors, one class difference, when it is difficult to find out the accurate class in the actual market. So we presented accuracy results within 1-class errors, and the Weston and Watkins method showed 85.7% accuracy in our test samples. We conclude that the DEA based multi-class approach in venture business generates more information than the binary classification problem, notwithstanding its efficiency level. We believe this model can help investors in decision making as it provides a reliably tool to evaluate venture companies in the financial domain. For the future research, we perceive the need to enhance such areas as the variable selection process, the parameter selection of kernel function, the generalization, and the sample size of multi-class.