• 유통과학연구
• /
• 제14권5호
• /
• pp.59-70
• /
• 2016

Purpose - The objectives of this study are described as following. First, the study will establish the concept of Brand Values of Environmentally-friendly agricultural product through theoretical discussion. Second, it shows the effects of Environmentally-Friendly Agricultural Products brand value on Brand Satisfaction, Brand Trust and Brand Loyalty by empirical investigation. Third, in order to provide the methodology of brand development, literature regarding and questionnaire survey were used such as Environmentally-Friendly Agricultural Products Brand Value, Brand Satisfaction, Brand Trust and Brand Loyalty. Based up on the results, the research estimates consumers' relative priorities of Environmentally-Friendly Agricultural Products Brand Value factors in purchase. This research also suggests the consumer oriented new brand development and the progressive direction for the successful launching of Korean Environmentally-Friendly Agricultural Products Brand. Research design, data, and methodology - Because the relative literatures reviewed regarding not only each factor but also the relationships among them, Brand Value was categorized into 4 dimensions: Emotional, Social, Functional, and Epistemic Value. Then, Brand Loyalty was added as an outcome variable and Brand Satisfaction, Brand Trust were also added as mediators. The proposed research model and 13 hypotheses were created and 23 measurement items were developed. A face-to-face questionnaire survey with items concerning the Brand Value of Environmentally-Friendly Agricultural Products is conducted to housewives in metropolitan area in May 2016. Respondent answered about Brand Value, Brand Satisfaction, Brand Trust and Brand Loyalty in preferred Environmentally-Friendly Agricultural Products. 333 copies of the questionnaire were collected and analyzed using SPSS 21.0 and AMOS 20.0 to determine the reliability and validity of the measurements. Results - From the confirmatory factor analysis and a structural equation modeling, the outcomes of these studies were as follows; (1) Three Brand value dimensions, i.e. Emotional Value, Social Value, and Epistemic Value had a significant and positive impact on Brand Satisfaction, but Functional Value did not. (2) Social Value also had an impact on Brand Trust, (3) Brand Satisfaction significantly affected Brand Trust, and Brand Trust influenced on Brand Loyalty, and (4) Brand Satisfaction were perfectly effective in mediation between Emotional Value, Epistemic Value and Brand Trust, and it also partially mediated between Social Value and Brand Trust. Conclusions - According to the result of consumer research on Environmentally-Friendly Agricultural Product brand, 3 dimensions of brand value affected brand satisfaction, and especially Social Value was a significant positive dimension. So, marketers should concern about value proposition of Environmentally-Friendly Agricultural Product to consumers by using premium package design, store identity, and distinctive product. Consumers wanted to get self-esteem, self-regard, and high social position by purchasing it. This study has academic and practical significance, so the findings can be applied to a wide range of brand management strategies. However, there are some limitations; 1) limitation about development of new brand value dimensions, 2) limitation about gender in the area of respondents. Future research should be done with wide range of respondents.

• 유통과학연구
• /
• 제13권11호
• /
• pp.93-100
• /
• 2015

Purpose - The objective of this research is to investigate whether national culture influences consumers' service evaluations. The services industry is receiving increasing attention from academia and practitioners as its position grows in global markets. Standardization or localization is a traditional managerial decision in global business. As the boundaries of services expand across national borders, firms are required to decide whether to standardize services or adjust to local needs. Though it is imperative to reflect global perspectives in marketing theories, these perspectives are mostly based on Western conceptualization of the world. Through a comparison of consumer groups from two culturally remote countries, service quality evaluation mechanisms are examined based on similar stimuli. The study tries to expand service marketing perspectives across national borders. Research design, data, and methodology - Eastern and Western countries are known to be culturally distinct. One Eastern and one Western country were chosen: an Anglo-Saxon country (the U.S., England, and Australia) and South Korea. In Hofstede's cultural dimensions, the differences between the two are pronounced. The Anglo-Saxon based countries share many similarities. Samples of the same sites are targeted. Questionnaires using a service quality scale (SERVQUAL) and a customer satisfaction scale were distributed. Utilizing Hofstede's typology of culture, the service evaluation mechanisms of the respondents from the two groups are evaluated. Three hypotheses are proposed from the review of the literature. These are service evaluation habits, importance of service quality dimensions for the individualistic/collectivistic countries, and strong/weak uncertainty avoidance cultures. Consumers from the individualistic countries are considered to care about themselves and demand a higher level of responsiveness and assurance. On the other hand, consumers from high uncertainty avoidance cultures are assumed to rely more on tangible questions of service quality, as these are the only predictable service quality indicators. A t-test and regression analysis are applied to validate the constructs. Results - The respondents from the Anglo-Saxon countries are more generous on service evaluations than Koreans. Researchers have indicated that Americans tend to give higher service evolution scores than European, Mexican, and Korean counterparts. The tendency is the same here. The sample from Anglo-Saxon countries demonstrated higher service evaluation scores on every dimension of SERVQUAL. For the second hypothesis, the respondents from the collectivistic culture rely less on core service dimensions (assurance and responsiveness) due to their tendency to place more value on group harmony than individual interest. However, the third hypothesis was not validated. Conclusions - The study attempted to expand the scope of service marketing to reflect cross-national perspectives. Service quality is known to have a strong influence on customer satisfaction and loyalty behavior. However, this research demonstrated that individuals from different cultural territories respond heterogeneously to the same stimuli. Scholars argue that national cultures are main factors in such deviated behavior. Scholars and global managers should be aware of differences in consumer value judgment mechanisms such as satisfaction, expectations, and perceptions.

• 한국산학기술학회논문지
• /
• 제17권11호
• /
• pp.376-385
• /
• 2016

본 연구는 신규간호사의 현실충격의 개념을 정립하고 정의하기 위해 시행되었다. 연구 분석 방법은 Schwartz-Barcott와 Kim의 혼종모형(Hybrid model)을 이용하였으며, 자료 수집은 S시와 G시에서 일하고 있는 6명의 신규간호사와 현실충격과 관련된 문헌으로부터 수집하였다. 본 연구 결과, 신규간호사의 현실충격은 3개의 영역과 9개의 속성으로 도출되었다. 3개의 영역은 인지적 영역, 정서적 영역, 상황적 영역으로 도출되었다. 인지적 영역은 현실충격을 일으키는 요인을 인지하는 것이며, 정서적 영역은 현실충격을 일으키는 상황을 직면한 후 나타나는 부정적인 정서 반응이며, 상황적 영역은 현실충격을 일으키는 상황을 말한다. 즉, 신규간호사의 현실충격 정의는 신규간호사는 (i) 학교에서 배운 것과 실무와의 차이, (ii) 이상과 현실의 가치 차이를 인지하고 (iii) 선임 간호사들의 전문성 부족, (iv) 간호사로서 존중받지 못하는 현실, (v) 생각했던 것보다 역할가중을 경험하게 되면서 무력감, 관계의 어려움, 혼란, 압박감과 같은 부정적인 정서를 갖게 되는 것을 말한다. 결과적으로 본 연구는 신규간호사의 현실충격의 개념을 정립함으로 인해 신규간호사의 현실충격을 경감할 수 있는 전략에 실제적인 밑거름이 될 수 있는 자료를 제공했다는데 의의가 있다.

• 한국운동역학회지
• /
• 제16권4호
• /
• pp.39-47
• /
• 2006

This study long jump action to each situation on a chessboard and section of sight disabled person and normal person through third dimension reflex analysis mechanical special quality because do comparative analysis sight disabled person's exercise ability and technology structure of action that run understand. As can do better without danger of injury map and training of exercise item that action that run is included, do offer of pabulum by purpose. Through this study, conclusion is as following. 1. Sight disabled persons' long jump average recording (121.84cm) showing normal persons' average recording (259.27cm) and much differences, show that motion of body is not big to Touch-down from Ready action. 2. Each phase body center composition(r) average speed displayed result that it is more meaning more than Each phase time required. 3. Began in line carriage without body back stretching in 1 situation on Event one are sight disabled persons. Was expose that do not bend enough knee and ankle than normal person in Event two. Was expose that body is not drooped for surface of land in Event three, and knee and ankle were expose that do not unfold easily than normal person. Was expose that do not bend enough on Touch-down knee by relation that can not grasp position of the floor in Event four. 4. When taking off, the average of horizontal speed of body center are 1.80m/sec for blind people and 3.53m/sec for the normal. In this connection, the study shows that the difference of horizontal speed between the blind and the normal is bigger than difference of vertical speed, which are 1.56m/sec for the blind and 1.98m/sec for the normal. Also, composite speed also shows us big difference between 2.41m/sec of the blind and 4.07m/sec of the normal. The speed body center of take-off was expose that average adjuster are big width of deceleration than average - beginning disabled person's average by 2.23m/sec - 1.71m/sec in the vertical speed. 5. If examine change of high and low for z Sign of right hand, change of high and low showed as is small than normal person is sight obstacle, and all hand movements are small and was expose that do not use enough reaction of body as well as in ready action.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2008년도 학술발표회 논문집
• /
• pp.694-698
• /
• 2008

In hydrology, it is a difficult task to deal with multivariate time series such as modeling streamflows of an entire complex river system. Normal distribution based model such as MARMA (Multivariate Autorgressive Moving average) has been a major approach for modeling the multivariate time series. There are some limitations for the normal based models. One of them might be the unfavorable data-transformation forcing that the data follow the normal distribution. Furthermore, the high dimension multivariate model requires the very large parameter matrix. As an alternative, one might be decomposing the multivariate data into independent components and modeling it individually. In 1985, Lins used Principal Component Analysis (PCA). The five scores, the decomposed data from the original data, were taken and were formulated individually. The one of the five scores were modeled with AR-2 while the others are modeled with AR-1 model. From the time series analysis using the scores of the five components, he noted "principal component time series might provide a relatively simple and meaningful alternative to conventional large MARMA models". This study is inspired from the researcher's quote to develop a multivariate simulation model. The multivariate simulation model is suggested here using Principal Component Analysis (PCA) and Independent Component Analysis (ICA). Three modeling step is applied for simulation. (1) PCA is used to decompose the correlated multivariate data into the uncorrelated data while ICA decomposes the data into independent components. Here, the autocorrelation structure of the decomposed data is still dominant, which is inherited from the data of the original domain. (2) Each component is resampled by block bootstrapping or K-nearest neighbor. (3) The resampled components bring back to original domain. From using the suggested approach one might expect that a) the simulated data are different with the historical data, b) no data transformation is required (in case of ICA), c) a complex system can be decomposed into independent component and modeled individually. The model with PCA and ICA are compared with the various statistics such as the basic statistics (mean, standard deviation, skewness, autocorrelation), and reservoir-related statistics, kernel density estimate.

• 한국중재학회지:중재연구
• /
• 제11권1호
• /
• pp.181-215
• /
• 2001

The thirty-fourth session of UNCITRAL Working Group on Arbitration was held in New York. Among the topics discussed at the session, many delegations agreed to reform the article 7 of the UNCITRAL Model Law on International Commercial Arbitration in light of the development of electronic commerce. As for the article 2(2) of the New York Convention, it was agreed to reflect the changes of the article 7 not in the form of a treaty amendment but in the form of an interpretative statement. The topic as to provisional measures has been found so difficult to reach an agreement that most of its texts submitted by the secretariat were left untouched for the lack of time. However, most provisions of the legislative texts on conciliation were dealt with by delegations. The next session is to be held in Vienna. While the Korean Arbitration Act of 1966 was fully amended in 1999, it seems interesting to look at the development in which the arbitration community of the world has already begun discussing the new dimension of the law and practice of international commercial arbitration. It may be considered early to start a new project of reforming the Korean Arbitration Act at this time when only three years passed after it was fully amended. It is, however, worthwhile to remember that some progressive efforts were aborted in amending the Arbitration Act of 1966. One of them is about the same issue on the insertion of some provisions on the enforcement of interim measures of protection to which the priority is given by the Working Group. It seems fair to say that it would not be dangerous to follow the developments and to adapt ourselves to such trends shown in the session. In Korea, the words “arbitration” and “conciliation” are misleadingly interchanged although these two words should be differentiated from each other in the sense of third-party binding decision. It is self-evident from the Korean Arbitration Act and judicial decisions that arbitral awards bind the disputing parties and are to be treated as final judgements by the competent courts. It is, however, not uncommon to find that the word “arbitration” is misinterpreted as having the same meaning of the word “conciliation”. One of the reasons for the confusion is that many legislations in Korea provide for conciliation as having the meaning of arbitration and vice versa. It may be probable that the proposed legislative texts on conciliation could be a kind of useful method to prevent such confusion from being uncontrollable. It is, therefore, necessary that the legislative texts should be introduced into Korea as a legislation on conciliation.

• 한국응급구조학회지
• /
• 제15권2호
• /
• pp.85-99
• /
• 2011

Purpose: The purpose of this study is to examine the EMT student's attitude to the disabled and provide the basic materials of educational program to make them have right awareness and attitude of the disabled. Methods: The subjects of this study were 348 of 339 emergency medical students at three departments of emergency medical in G metropolitan city who gave consent to take part in the research and the data were collected for 10 days from Mar. 2 to 11, 2011. It used DFS (Disability Factor Scale) developed by Siller (1967) and revised and complemented by Lee Jong Nam (1997) after validity and reliability test. Data collected were analyzed with technical statistics, t-test and ANOVA using SPSS/ PC 12.0 Results: The results of this study are summarized as follows. 1. On the question that there are the disabled around the subjects, 74.7% of the respondents answered 'none', and on the question of having concerns on the disabled problems, 61.5% of the respondents answered 'they have no concerns on them'. In addition, on the question of effective methods for improving a negative awareness of the disabled, many of subjects responded the governmental support must be a priority. 2. The subjects' attitude to the disabled scored average 3.13 and they have positive attitude to the disabled. In six sub-areas of attitude to the disabled, tension in contact with the disabled scored 2.90, inferred emotional disorder 2.79, unconditional repulsion 2.78, refusal to friendly relation 2.74, limitation of other functions undamaged 2.66 and distorted identification 2.65. 3. Variable showing a significant difference in the results of analysis according to general characteristics of subjects was age and those who are over '21' showed more positive attitude to the disabled than those who are below '20'. 4. In the results of analysis according to the subjects' disability related characteristics, those who have the disabled in their friends or family and have concerns on the disabled problems have a positive attitude to the disabled. Promotion and education through mass communication for changing the awareness of the disabled into a positive attitude will be most effective. Conclusion: Consequently, positive attitude of EMT student's to the disabled can be fostered by continuous contact with the disabled and their participation in voluntary services in the dimension of individual or school will be important and also the various practical methods such as enlightenment movement and supply of right information through mass communication should be sought.

• 대한소아치과학회지
• /
• 제35권4호
• /
• pp.737-743
• /
• 2008

국소적 치아 이형성증(Regional Odontodysplasia)은 치아 경조직에 비교적 드물게 나타나는 발육성 장애로 치열궁의 특정 사분악에 국한되어 나타나며 이환치 경조직의 모든 구성요소가 발육 부전이나 석회화 부전을 보인다. 국소적 치아 이형성증에 대한 장기적 치료와 관리를 위해서는 여러 분야에 걸친 체계적 접근이 요구되며, 치료 계획은 환자의 저작기능과 심미성의 회복, 정상적인 수직고경과 공간의 유지, 악골의 정상적인 성장과 이환치의 맹출관리를 도모할 목적으로 수립되어야 한다. 본 증례보고에서는 부산대학교병원 소아치과에서 국소적 치아 이형성증으로 진단받고, $2{\sim}5$년간 정기적인 관찰을 받아온 5세 8개월${\sim}$10세 9개월 어린이 3명을 대상으로 그 간의 치료 내용과 치아 발육과정을 검토해 보았다. 관찰 기간 동안 12개 이환치 중 심한 염증과 이형성으로 발거된 1개 치아를 제외한 모든 치아에서 석회화의 진행 또는 치조골 상방으로의 맹출성 이동을 보이긴 하였으나 그 정도와 속도는 개개 치아마다 매우 다양하였다. 그러므로 치료는 악골의 정상 발육과 공간 유지를 도모하고 치아의 조기 상실에 따른 부작용을 차단하기 위해서 이환치에 대하여 최대한으로 보존적인 접근을 하는 것이 추천된다. 또한 치아마다 그 발육정도가 다양하므로 개개 치아의 맹출 관리를 위한 독립적인 치료 계획을 수립하는 것이 바람직할 것으로 판단된다.

• 대한치과보철학회지
• /
• 제38권2호
• /
• pp.200-213
• /
• 2000

Lasers have given dentistry a new rapid, economic, and accurate technique for metal joining. Although laser welding has been recommended as an accurate technique, there are some limitations with this technique. For example, the two joining surfaces must have a tight-fitting contact, which may be difficult to achieve in some situations. The tensile samples used for this study were made from a custom-made pure titanium and type III gold alloy plates. 27 of 33 specimens were sectioned perpendicular to their long axis with a carborundum disk and water coolant. Six specimens remained and served as the control group. A group of 6 specimens was posed as butt joints in custom parallel positioning device with a feeler gauge at each of three gaps : 0.00, 0.25. and 0.50mm. All specimens were then machined to produce a uniform cross-sectional dimension, none of the specimens was subjected to any subsequent form of heat treatment. Scanning electron microscopy was performed on representative tested specimens at fractured surfaces in both the parent metal and the weld. Vickers hardness was measured at the center of the welds with a micropenetrometer using a force of 300gm for 15 seconds. Measurement was made at approximately $200{\mu}m\;and\;500{\mu}m$ deep from each surface. One-way analysis of variance (ANOVA) and Scheffe's test was calculated to detect differences between groups. The purpose of this study is to compare the strength and properties of the joint achieved at various butt Joint gaps by the laser welding of type III gold alloy and pure titanium tensile specimens in an argon atmosphere. The results of this study were as follows : 1. When indexing and welding pure titanium, there was no decrease in ultimate tensile strength as compared with the unsectioned alloys for indexing gaps of 0.00 to 0.50mm, although with increasing gap size may come increased distortion (p>0.05). 2. When indexing and welding type III gold alloy, there were significant differences in ultimate tensile strength among groups with weld gaps of 0.00mm, 0.25 and 0.50mm, and the control group. Group with butt contact without weld gap demonstrated a significant higher ultimate tensile strength than groups with weld gaps of 0.25 and 0.50mm (p<0.05). 3. When indexing and welding the different metal combination of type III gold alloy and pure titanium, there were significant differences in ultimate tensile strength between groups with weld gaps of 0.00, 0.25, and 0.50mm. However, the mechanical properties of the welded joint would become too brittle to be acceptable clinically (p<0.05). 4. The presence of large pores in the laser welded joint appears to be the most important factor in controlling the tensile strength of the weld in both pure titanium and type III gold alloy.

• 대한간호학회지
• /
• 제8권2호
• /
• pp.39-49
• /
• 1978

The present research set out to further validate the results that Stromborg (1976) obtained in which a correlation (r= .22, p < .001) was found between the femininity of woman nursing students and their image of nursing. In addition the experimenter set out to elucidate any possible differences in the image of nursing according to (a) religion, (b) the motivation for choosing nursing as well as, (c) the particular area in which the students hoped to work after graduating. The research was conducted by presenting questionnaire type scales including a femininity scale and a nursing image scale, to 301 graduating students attending 4 Three-year nursing schools located within Seoul from November 21st, 1978 to November 30th. The results: 1. There was clearly no relation between femininity and the image of nursing as such (r= .01, p > .43). But upon analyzing the results along five subdimensions of the nursing image variable it was discovered that : (a) if femininity is low, the nursing student tend to view the educational preparation for becoming a nurse in a more positive light (r= -.10, p < .05), and (b) if femininity is high, the students tend to perceive their social role with a positive frame of mind (r= .15, p < .005). 2. There was a significant difference found in the image of nursing as related to the religion of the nursing students, The means ranked as follows (high scores indicate a positive image of the nursing profession). Catholic > Protestant > no religion > Buddhist 3, The difference in the nursing image according to motivation for sellecting the profession emerged as quite significant (F=6.92, p < .001). The rank of the means when the subject group is divided along the dimension of motive is as follows (ranking begins with the most positive nursing image): (a) The profession itself seemed good; (b) after marriage one can do a social type of activity; (c) significant others’advice: (d) the profession matches their high school grade record; (e) it matches the economic situation of the student; (f）no particular reason for their choice: (g) it's easy to get a nursing job after graduation. 4. The particular area of nursing one intended to go into after graduation varied significantly in terms of the image of nursing (F=3.03, p < .005). The means when ranked starting with those having the most positive image of the profession: (a) nurses helping deliveries; (b) hospital nurses: (c) nursing education; (d) school nurses: (e) government nurse supervisors: (f）public health nurses: (g) (students not going into any profession); (h) (students not going into the nursing profession but into some other area).