• 한국항공우주학회지
• /
• 제38권9호
• /
• pp.875-881
• /
• 2010

달탐사 임무를 수행하는 인공위성의 경우 임무수행을 하는 과정에서 3체에 의한 인력, 태양풍 그리고 추력시스템의 추력오차 등의 많은 예기치 못한 외부 섭동력에 영향을 받게 된다. 따라서 주어진 임무궤도를 따라서 인공위성이 운영되기 위해서 궤적 보정 기동이 필요하다. 우주 탐사의 초창기 시절에는 이러한 임무궤도는 주로 2체 운동방정식에 기반을 한 패치 코닉(Patched Conic)기법으로 생성을 하였으며, 이로 인해 2체 운동방정식에 기반을 한 궤적 보정 기동이 많이 사용되어져 왔다. 하지만 최근 컴퓨터 연산능력의 향상에 기인하여 이러한 임무궤도를 지구-인공위성-달의 3체 운동방정식에 기반하여 설계하고 있는 추세이다. 따라서 기존의 2체 운동방식 기반의 궤적 보정 기동으로는 실제 우주환경과 많은 차이를 보이기 때문에 달의 작용권구(Sphere of Influence)에 접근할수록 많은 궤도오차를 보이며, 이를 보정하기 위해서 많은 에너지가 필요하게 된다. 따라서 본 논문에서는 3체 운동방정식에 기인한 궤적 보정 기동에 대하여 기술하고자 한다.

• 한국위성정보통신학회논문지
• /
• 제5권2호
• /
• pp.50-56
• /
• 2010

이제까지 수행된 우주 탐사 임무에서 임무 궤도의 설계는 행성 혹은 위성과 인공위성의 2체 문제 (two-body problem)에 기초한 Hohmann transfer를 기반으로 하는 Patched Conic Approximation 방식이 주로 사용되어져 왔다. Hohmann transfer는 원 궤도에서 다른 원 궤도로 천이할 수 있는 타원 천이 궤도의 설계 방식으로서, Patched Conic Approximation은 태양계를 여러 개의 2체 문제로 분해하고 각기 분해된 2체 시스템 사이의 Hohmann 천이 궤도를 설계하여 조합함으로써 행성 간의 임무 궤도를 설계하는 방식이다. 이 방식은 하나의 행성만을 고려했을 때, 즉 행성과 인공위성의 2체 문제일 때, 가장 효율적인 천이 방식으로 알려져 있고 현재까지의 우주 탐사 임무 설계에 주로 이용되고 있다. 하지만, 우주 탐사 임무가 점차 다양화되고 소형 위성을 이용한 임무 수행의 필요성이 증가함에 따라 기존의 Patched Conic Approximation은 요구되는 연료의 양이 크다는 점과 원뿔꼴(conic) 특성을 가지는 궤도만을 표현할 수 있다는 점에서 한계점을 보이기 시작하고 있다. 이에 반해 3체 동역학의 기하학적 특성은 기존의 태양계의 패러다임을 획기적으로 변화시킨다. 개념적으로는 요구되는 에너지가 매우 적은 에너지로 태양계를 모두 연결하는 궤도를 구성할 수 있기 때문이다. 본 논문에서는2체문제 기반의 임무 궤도 설계 기술의 한계성에서 벗어나 유연하고 효율적인 탐사 임무를 설계한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.409-414
• /
• 2007

Nowadays, with the advancement of computational mechanics, and vehicle dynamics simulation linked up with virtual testing laboratory(VTL) and virtual proving ground(VPG) technologies has become a useful method for analyzing numerous driving performances and diverse noise/vibration characteristics. In this paper, the analytical vehicle model based on multi-body dynamics theory was developed to investigate the vibration characteristics according to various road conditions. For the purpose, the whole vehicle parameters, each vehicle's part parameter, and part connecting elements such as spring, damper, and bush were measured by an experiment. Also, the vehicle dynamics model, which includes the front suspension, rear suspension, steering, front wheel, rear wheel, and body subsystems has been constructed for computer simulation. With the developed vehicle dynamics model, three forces and three moments measured at each wheel center were applied to evaluate and analyze dynamics and vibration characteristics for miscellaneous road conditions.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.253-258
• /
• 2001

This paper introduces a simple nonlinear adaptive control method for pipeline inspection gauge (PIG) flow in natural gas pipeline. The dynamic behavior of the PIG depends on the different pressure across its body and the bypass flow through it. The system dynamics includes: dynamics of driving gas flow behind the PIG, dynamics of expelled gas in front of the PIG, and dynamics of the PIG. The method of characteristics (MOC) and Runger-Kuta method are used to solve the dynamics of flow. The PIG velocity is controlled through the amount of bypass flow across its body. A simple nonlinear adaptive controller based on the backstepping method is introduced. To derive the controller, three system parameters should be measured: the PIG position, its velocity and the velocity of bypass flow across the PIG body. The simulation has been done with a pipeline segment in the KOGAS low pressure system, Ueijungboo-Sangye line to verify the effectiveness of the proposed controller. Three cases of interest are considered: the PIG starts to move at its launcher, the PIG arrives at its receiver and the PIG restarts after stopping in the pipeline by obstruction. The simulation results show that the proposed nonlinear adaptive controller attained good performance and can be used for controlling the PIG velocity.

• 한국전산유체공학회지
• /
• 제20권2호
• /
• pp.103-108
• /
• 2015

Fluid-body interaction analysis of floating body with six degree-of-freedom motion is presented. In this study, three-dimensional incompressible Navier-Stokes equations are employed as a governing equation. The numerical method is based on a finite-volume approach on a cartesian grid together with a fractional-step method. To represent the body motion, the immersed boundary method for direct forcing is employed. In order to simulate the coupled six degree-of-freedom motion, Euler's equations based on rigid body dynamics are utilized. To represent the complex body shape, level-set based algorithm is utilized. In order to describe the free surface motion, the volume of fluid method utilizing the tangent of hyperbola for interface capturing scheme is employed. This study showed three different continuums(air, water and body) are simultaneously simulated by newly developed code. To demonstrate the applicability of the current approach, two different problems(dam-breaking with stationary obstacle and water entry) are simulated and all results are validated.

• Journal of Mechanical Science and Technology
• /
• 제19권4호
• /
• pp.976-984
• /
• 2005

This paper presents the analysis results of dynamics in the billiards game within the frame­work of rigid-body mechanics and a numerical simulation program. The friction exists between the ball and the table bed as well as between the ball and the rail. There are three parts in the dynamic behavior of the ball on the table bed; motion of the ball on the table bed, collision between balls, and collision between the ball and the cushion. During the development of the simulation program, the dynamics problems such as rolling motion and three-dimensional frictional impact motion have been analyzed in detail. The theoretical issues are implemented into a viable graphic simulation program and its efficacy is demonstrated through the experi­mental validation of the billiards game. The resulting analysis results are verified quantitatively and qualitatively using high-speed video camera. Through the experimental tests, it was found that the physical parameters such as coefficients of restitution and friction vary according to the motion variables and corresponding empirical formulations were developed. The simulation and experimental results agree well.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권4호
• /
• pp.1197-1208
• /
• 2014

The problem of the oblique water entry of a three dimensional body is considered. Wagner theory is the theoretical framework. Applications are discussed for an elliptic paraboloid entering an initially flat free surface. A dedicated experimental campaign yields a data base for comparisons. In the present analysis, pressure, force and dynamics of the wetted surface expansion are assessed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 춘계학술대회 논문집
• /
• pp.78-83
• /
• 2009

In this study, computer applied engineering (CAE) techniques are fully used to conduct structural and dynamic analyses of a whole huge wind turbine system including composite blades, tower and nacelle. For this study, computational fluid dynamics (CFD) is used to predict aerodynamic loads of the rotating wind-turbine blade model. Multi-body dynamic structural analyses are conducted based on the non-linear finite element method (FEM) by using super-element method for composite laminates blade. Three-dimensional finite element model of a wind turbine system is constructed including power train(main shaft, gear box, coupling, generator), bedplate and tower. The results for multi-body dynamic simulations on the wind turbine's critical operating conditions are presented in detail.

• International Journal of Aeronautical and Space Sciences
• /
• 제2권2호
• /
• pp.1-18
• /
• 2001

A numerical technique for simulating the separation dynamics of strap-on boosters jettisoned in the dense atmosphere is presented. Six degree of freedom rigid body equations of motion are integrated into the three-dimensional unsteady Navier-Stokes solution procedure to determine the dynamic motions of strap-ons. An automated Chimera overlaid grid technique is introduced to achieve maximum efficiency for multi-body dynamic motion and a domain division technique is implemented in order to reduce the computational cost required to find interpolation points in the Chimera grids. The flow solver is validated by comparing the computed results around the Titan IV launch vehicle with experimental data. The complete analysis process is then applied to the. H-II launch vehicle, the central rocket in japans space program, the CZ-3C launch vehicle developed in China and the KSR-III, a three-stage sounding rocket being developed in Korea. From the analyses, separation trajectories of strap-on boosters are predicted and aerodynamic characteristics around the vehicles at every time interval are examined. In addition, separation-impulse devices generally introduced for safe separation of strap-ons are properly modeled in the present paper and the jettisoning force requirements are examined quantitatively.

• 전기학회논문지
• /
• 제63권1호
• /
• pp.162-172
• /
• 2014

A three-dimensional dynamic model for simulating various motions of full vehicle is presented. The model has 16 independent degrees of freedom (DOF) consisting of three kinds of components; a vehicle body of 6 DOF, 4 independent suspensions equipped at every corner of the body, and 4 tire models linked with each suspension. The dynamic equations are represented in six coordinate frames such as world fixed coordinate, vehicle fixed coordinate, and four wheel fixed coordinate frames. Then these lead to the approximated prediction model of vehicle posture. Both lateral and longitudinal dynamics can be computed simultaneously under the conditions of which various inputs including steering command, driving torque, gravity, rolling resistance of tire, aerodynamic resistance, etc. are considered. It is shown through simulations that the proposed 3D model can be useful for precise design and performance analysis of any full vehicle control systems.