• Horticultural Science & Technology
• /
• v.29 no.6
• /
• pp.523-530
• /
• 2011

This study was carried out to understand the characteristic relations fruit changes caused by adjusting the amount of the fruit load in 'Niitaka' and 'Whangkeumbae'. The average fruit weight of 'Niitaka' was 672.0 g and the amount of fruit in the range of 601-750 g was the highest, accounting for 33.8% of the production and as for 'Whangkeumbae', the average fruit weight was 477.5 g and fruit in the range of 401-600 g accounted for 72.5% of total production. The weight of the 'Niitaka' was evenly distributed in each range from below 300 g to over 1 kg and the percent of the regular shaped fruit in 'Whangkeumbae' was high as the distribution range of the fruit weight was narrow. The brix degree and the soluble solid content (SSC)/acidity ratio of 'Niitaka' had a significantly positive correlation with the fruit weight, the length, and the diameter of the fruit. The brix degree also had a positive correlation with weight and diameter of the fruit for 'Whangkeumbae'. As for the difference in fruit quality according to fruit weight for each variety, the brix degree was low in 'Niitaka' that were below 451 g and the fruit firmness was low in fruits weighing under 400 g. There was no difference according to fruit weight in 'Whangkeumbae'. The fruit size was impacted by the fleshy part and the ratio of fleshy part was higher as the fruit size became larger. The weight of the fruit, brix degree, and the SSC/acidity ratio were low while the firmness was high in light thinning treatment for 'Niitaka' and in the case of 'Whangkeumbae', the fruit weight and brix degree were both low in light thinning treatment. The brix degree was higher in bigger sized fruit in all thinning intensity for 'Niitaka', the case in light thinning treatment especially where the quality was poor due to low brix degree in fruits that weighed less than 450 g, on the other hand, there was no difference in the quality due to the fruit weight among the thinning intensity for 'Whangkeumbae'. Therefore, it is possible to produce smaller sized fruits in 'Niitaka' by controlling the thinning intensity, as it is inevitable to result in lower quality fruits, however, it is projected that we can produce small to mid-sized fruits in 'Whangkeumbae' by controlling the thinning intensity without causing the decline in fruit quality.

• Journal of Ginseng Research
• /
• v.3 no.2
• /
• pp.105-112
• /
• 1979

Effect of gibberllin on the breaking of bud dormancy of root and growth of aerial parts were investigated under laboratory and field condition for the prolongation of shoot growth duration, shortening of fruit bearing age and the increase of root yield. Drop application of GA (0.5ml of 50ppm) on rhizome of one year old root broke bud dormancy better than by low temperature. Soaking for one hour of one year old roots which wintered in the field in GA (50-200ppm) greatly accelerated the emergence of new buds while kinetin was only effective at low level (50ppm). GA substantially increased stem length in early stage and petiole length later on while kinetin increased stem diameter. Under the field condition with polythylene film tunnel (PET) in early spring the soaking in GA (50ppm for 1 hour) of rhizome of 4 year old root with replanting and dropping GA (50ppm, 1ml) on rhizome without replanting brought earlier emergence (29days) in comparison with that in the usual field. PET alone caused 14 day-early emergence. GA increased the length of stem and petiole only in early stage and replanting decreased only petiole length in later stage. Soaking in GA with replanting caused the Pronounced decrease in peduncle length, percentage of (ruin set and dry weight of reproductive organ (fruits and peduncle). Dropping without replanting showed significant decrease only in dry weight of reproductive organ. Fruit maturing was 20 days earlier than in usual held with little difference between GA and PET. It is well expected that GA could be used for early emergence of bud, shortening of root dormancy period, thinning of fruit and higher root yield according to application amount and methods.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.31 no.1
• /
• pp.89-93
• /
• 2005

Intraosseous neurilemmoma(Schwannoma) is an extremely rare benign neoplasm. The site most commonly involved is the mandible. This occurrence is understandable because of the length of the inferior alveolar canal through the mandible. No other bone contains a canal that transmits a neurovascular bundle of such size and length. We report on a peripheral and central neurilemmoma along pathway of inferior alveolar nerve of the lower lip and mandible in a 28-year old man. A panoramic radiograph of the mandible showed a well-defined bilocular lesion with a thin uniform sclerotic margin located in the ramus and body of the mandible. The CT scan confirmed a well-defined lesion with thinning of the cortex of the body of the left side of the mandible. Histologically, the lesion was a cellular neoplasm with distinct palisading and numerous Verocay bodies. Complete excision was achieved by removing the tumor with the inferior alveolar nerve.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.4 no.2
• /
• pp.94-99
• /
• 2004

silicided 50-nm-gate-length n-type Schottky barrier metal-oxide-semiconductor field-effect-transistors (SB-MOSFETs) with 5 nm gate oxide thickness are manufactured. The saturation current is $120{\mu}A/{\mu}m$ and on/off-current ratio is higher than $10^5$ with low leakage current less than $10{\mu}A/{\mu}m$. Novel phenomena of this device are discussed. The increase of tunneling current with the increase of drain voltage is explained using drain induced Schottky barrier thickness thinning effect. The abnormal increase of drain current with the decrease of gate voltage is explained by hole carrier injection from drain into channel. The mechanism of threshold voltage increase in SB-MOSFETs is discussed. Based on the extracted model parameters, the performance of 10-nm-gate-length SB-MOSFETs is predicted. The results show that the subthreshold swing value can be lower than 60 mV/decade.

• Archives of Plastic Surgery
• /
• v.45 no.3
• /
• pp.253-258
• /
• 2018

Background The nasolabial flap is ideal for reconstruction of the nasal alar subunit due to its proximity, color and contour match, and well-placed donor scar. When raised as a random-pattern flap, there is a risk of vascular compromise to the tip with increased flap length and aggressive flap thinning. Surgical delay can greatly improve the chances of tip survival, allowing the harvest of longer flaps with greater reach. Methods We describe our technique of lengthening the nasolabial flap through multiple delay procedures. A bipedicled flap was first raised and then transferred as a unipedicled flap with a 6:1 length-to-width ratio. During the delay process, the flap tip was thinned to the subdermal layer. Results In our case series of seven patients, defects as far as the medial canthal area and contralateral ala were reconstructed successfully with no incidence of tip necrosis or flap loss. The resultant flaps were thin enough to be folded over for the reconstruction of alar rim defects. Conclusions We highlight the success of our surgical technique in creating thin and robust nasolabial flaps for the reconstruction of full-thickness defects around the nose.

• Journal of the Korean Institute of Gas
• /
• v.9 no.3 s.28
• /
• pp.1-8
• /
• 2005

We studied on the nondestructive evaluation of the elastic wave signals of locally wall thinned straight pipe. Wavelet transform was applied for the time-frequency analysis of waveforms obtained by fracture wave detector due to the dropping steel ball. The time-frequency analysis provides time variation of each frequency component involved in a waveform, which makes it possible to evaluate the shape of local wall thinning at each frequency. In this study, comparison by wavelet transform of the AE signals and monotonic bending tests without internal pressure are conducted on 1.91 inch diameter full-scale carbon steel pipe specimens. As the results of tests, fracture behaviors could be shown by the characteristic of mechanical strength of locally wall thinned pipes and the waveforms could be evaluated for the integrity insurance of the piping system according to the length and depth range of the deffeted shape pipes in the real field.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.6
• /
• pp.2324-2332
• /
• 2017

This paper presents the electrical performances of novel AlGaSb/InGaAs heterojunction-based vertical-tunneling field-effect transistor (VTFET). The device performance was investigated in views of the on-state current ($I_{on}$), drain-induced barrier thinning (DIBT), and subthreshold swing (SS) as the gate length ($L_G$) was scaled down. The proposed TFET with a $L_G$ of 5 nm operated with an $I_{on}$ of $1.3mA/{\mu}m$, a DIBT of 40 mV/V, and an SS of 23 mV/dec at a drain voltage ($V_{DS}$) of 0.23 V. The proposed TFET provided approximately 25 times lower DIBT and 12 times smaller SS compared with the conventional $L_G$ of 5 nm TFET. The AlGaSb/InGaAs VTFET showed extremely high scalability and strong immunity against short-channel effects.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.9
• /
• pp.835-843
• /
• 2008

We have fabricated the source-drain electrodes for OTFTs by screen printing method and manufactured Ag pastes as conductive paste. To obtain excellent conductivity and screen-printability of Ag pastes, the dispersion characteristics of Ag pastes prepared from two types of acryl resins with different molecular structures and Ag powder treated with caprylic acid, triethanol amine and dodecane thiol as surfactant respectively were investigated. The Ag pastes containing Ag powder treated with dodecane thiol having thiol as anchor group or AA4123 with carboxyl group(COOH) of hydrophilic group as binder resin exhibited excellent dispersity. But, Ag pastes(CA-41, TA-41, DT-41) prepared from AA4123 fabricated the insulating layer since the strong interaction between surface of Ag powder and carboxyl group(COOH) of AA4123 interfered with the formation of conduction path among Ag powders. The viscosity behavior of Ag pastes exhibited shear-thinning flow in the high shear rate range and the pastes with bad dispersion characteristic demonstrated higher shear-thinning index than those with good dispersity due to the weak flocculated network structure. The output curve of OTFT device with a channel length of 107 ${\mu}m$ using screen-printed S-D electrodes from DT-30 showed good saturation behavior and no significant contact resistance. And this device exhibited a saturation mobility of $4.0{\times}10^{-3}$ $cm^2/Vs$, on/off current ratio of about $10^5$ and a threshold voltage of about 0.7 V.

• Applied Microscopy
• /
• v.47 no.3
• /
• pp.165-170
• /
• 2017

Gas vesicles are intracellular gas-filled protein-shelled nanocompartments. The structures are spindle or cylinder-shaped, and typically $0.1{\sim}2{\mu}m$ in length and 45~250 nm in width. A variety of prokaryotes including photosynthetic bacteria and halophilic archaea form gas vesicles in their cytoplasm. Gas vesicles provide cell buoyancy as flotation devices in aqueous habitats. They are used as nanoscale molecular reporters for ultrasound imaging for biomedical purposes. The structures in halophilic archaea are poorly resolved due to the low signal-to-noise ratio from the high salt concentration in the medium. Such a limitation can be overcome using focused ion beam-thinning or inelastically scattered electrons. As the concentric bodies (~200 nm in diameter) in fungi possess gas-filled cores, it is possible that the concept of gas vesicles could be applied to eukaryotic microbes beyond prokaryotes.

• Journal of the Korean Statistical Society
• /
• v.23 no.2
• /
• pp.483-498
• /
• 1994

Suppose that a stationary process ${X_t}$ has a marginal distribution whose support consists of sufficiently large integers. We are concerned with some analogous law of large numbers for such distribution function F. In particular, we determine a weak law of large numbers for maximum queueing length in $M/M\infty$ system. We also present a limiting behavior for the maxima based on AR(1) process with binomial thining and poisson marginals (INAR(1)) introduced by E. Mckenzie. It turns out that the result of AR(1) process is the same as that of $M/M/\infty$ queueing process in limit when we observe the queues at regularly spaced intervals of time.