• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2004.11a
• /
• pp.3-4
• /
• 2004

A flexible Packaging scheme, which embedded chip packaging, has been developed using a thinned silicon chip. Mechanical characteristics of thinned silicon chips are examined by bending test and finite element analysis. Thinned silicon chips ($t<50{\mu}m$) are fabricated by chemical etching process to avoid possible surface damages on them. These technologies can be use for a real-time monitoring of blood pressure. Our research targets are implantable blood pressure sensor and its telemetric measurement. By winding round the coronary arteries, we can measure the blood pressure by capacitance variation of blood vessel.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.7 s.238
• /
• pp.947-954
• /
• 2005

The purpose of this study is to develop failure pressure evaluation models, which are applicable to straight pipes and elbows containing an internally wall thinning defect induced by flow-accelerated-corrosion (FAC). In this study, thus, three dimensional finite element (FE) analyses are performed to investigate the dependences of failure pressure of internally wall thinned pipe on the defect shape, the pipe geometry, and the defect location and bend radius of elbow. Also, the existing failure pressure assessment models for externally wall thinned pipes are examined. Based on these, the new models for assessing failure pressure of piping components with an internally wall thinning defect are proposed. Comparison of failure pressure, predicted by proposed models, with FE analysis result shows good agreement regardless of pipe type, defect shape, and defect location and bend radius.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.11 no.2
• /
• pp.51-60
• /
• 2015

Local wall thinning and integrity degradation caused by several mechanisms, such as flow accelerated corrosion, cavitation, flashing and/or liquid droplet impingement, is a main concern in secondary steam cycle piping system of nuclear power plants in terms of safety and operability. Thinned pipe management program (TPMP) has being developed and optimized to reduce the possibility of unplanned shutdown and/or power reduction due to pipe failure caused by wall thinning. In this paper, newest technologies, standards and regulations related to the integrity assessment, repair and replacement of thinned pipe component are reviewed. And technical improvement items in TPMP to secure the reliability and effectiveness are also presented.

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.4
• /
• pp.51-55
• /
• 2000

The woodceramics which are new porous carbon materials were obtained by carbonizing from thinned small log of Aomori HIBA (Thujopsis dolabrata S. et. Z. var. hondae M.) impregnated with phenol resin in a vacuum furnace. During the carbonization process, the resin changes into glassy carbon, which has superior property. The resin impregnation rate and bending strength depend on the types of board and density. In this paper, the manufacturing method of woodceramics made from thinned small logs of Aomori HIBA was introduced and some properties were examined.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.7 no.1
• /
• pp.27-34
• /
• 2011

The objective of this study is to classify the geometry of wall-thinning defect that causes a circumferential crack in the pipe elbows subjected to internal pressure. For this objective, first of all a criterion to determine the occurrence of circumferential cracking at wall-thinned area was developed based on finite element simulation for burst tests of pipe elbow specimens that showed axial and circumferential cracking at wall-thinned area. In addition, parametric finite element analysis including various wall-thinning geometries, locations, and pipe geometries was conducted and the wall-thinning geometries that initiate circumferential crack were determined by applying the criterion to the results of parametric analysis. It showed that the circumferential crack occurs at wall-thinning defect, which has a deep, wide, and short geometry. Also, it is indicated that the pipe elbows with larger radius to thickness ratio are more susceptible to circumferential cracking at wall-thinned area.

• Nuclear Engineering and Technology
• /
• v.32 no.1
• /
• pp.67-76
• /
• 2000

Significant wall thinning due to flow accelerated corrosion(FAC）was recently reported in main feedwater pipes in 3 Korean pressurized water reactor(PWR) plants. The main feedwater pipes in one plant were repaired using overlay weld method at the outside of pipe, while those in 2 other plants were replaced with new pipes. In this study, the effect of the wall thinning in the main feedwater pipes on piping integrity was evaluated using finite element method. Especially, the effects of both the overlay weld repair and the stress concentration in notch-type thinned area on the piping integrity were investigated. The results are as follows : (1) The piping load carrying capacity may significantly decrease due to FAC. In special, the load carrying capacity of the main feedwater pipe was reduced by about 40% during about 140 months operation in Korean PWR plants. (2) By performing overlay weld repair at the outside of pipe, the piping load carrying capacity can increase and the stress concentration level in the thinned area can be reduced.

• Journal of Korea Foresty Energy
• /
• v.22 no.1
• /
• pp.44-48
• /
• 2003

Flexural properties were investigated on clear specimens made from small diameter thinned trees of pitch pine (Pinus rigida Mill.), Japanese red pine (Pinus densiflora Sieb. et Zucc), Japanese larch (Larix kaempferi Carr.), and sawtooth oak (Quercus acutissima Carr.). MOR and MOE values of small clear specimen were depended on the species. The highest density of sawtooth oak shows the highest values of MOR and MOE. However, the lowest density of Japanese larch shows the lowest values of MOR. It was also shown that flexural properties could be predicted by stress wave MOE, since the correlations between stress wave MOE and flexural properties were relatively good.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.18 no.1
• /
• pp.11-18
• /
• 2022

When wall-thinning in a pipe occurs during operation of nuclear power plant, reinforcement of the pipe needs to be performed. Accordingly, the structural response of the piping system due to introduction of the reinforcement may be re-evaluated. For elastic structural analysis of the piping system with the reinforced pipe using finite element (FE) analysis, the stiffness of the reinforced pipe is needed. In this study, the stiffness matrix of wall-thinned pipe with pad reinforcement or composite reinforcement is analytically derived. The validity of the proposed equations is checked by comparing with systematic finite element (FE) analysis results.

• Fire Science and Engineering
• /
• v.22 no.1
• /
• pp.45-53
• /
• 2008

The effect of thinned trees which are produced from forest thinning on forest fire was studied in this work. To investigate the effect of thinning slash, Yang-yang, In-je, and Ga-pyeong-gun were selected as thinning-areas and non-thinning areas. The research was carried out with the variations of tree's types, area's characteristics, thinning strength, thinning types, and pile types of thinned tree. The survey areas of 14 areas were selected at Yangyang-gun(5 areas), Gapyeong-gun(4 areas), and Inje-gun(5 areas), and on-the-spot investigations were carried out at the thinning areas of 9 and the non-thinning areas of 5, respectively. Non-thinning areas of 5, which are adjacent to thinning areas, were selected for the comparison with thinning areas and for the analysis of risk of forest fire. It is considered that forest fire have no chance to diffuse to a tree trunk because the height of thinned trees was lower than 1 m. However, it is considered that forest fire may affect directly to a tree trunk if it spread to piled thinned tree because there was no space between thinned trees and trees. Furthermore, it was found that re-ignition had a chance to occur due to lots of piled thinning trees.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.4E
• /
• pp.22-27
• /
• 1998

A modified perturbation method is proposed to optimize the beam pattern of thinned microphone arrays. Both microphone spacing and array weight are iteratively adjusted via successive perturbation to achieve an optimum beam pattern in a Dolph Chebyshev sense. To improve the sidelobe performance, an alternative perturbation with respect to microphone spacing and array weight is implemented. Also, a linear space-tapering is employed in the perturbation process. It is demonstrated that the proposed approaches successfully yield sidelobe performances comparable to that of a normal array. Computer simulation results are presented.