• 한국자기학회지
• /
• 제5권1호
• /
• pp.42-47
• /
• 1995

자기 유도 헤드용 FeN 박막을 RF diode reactive 스퍼터 방법으로 Corning 7059 유리 기판 위에 증착하여 그 자기적 특성을 측정하였다. FeN 박막의 자기적 특성은 박막 두께, 가스 압력, 스퍼터 파워, $N_{2}$와 Ar의 유량비에 큰 영향을 받았다. 스퍼터 파워 800 W, 가스 압력 3 mT, 질소와 아르곤의 유량비 6.6 : 100, 단층 박막의 두께를 $1,000\;{\AA}$에서 $6,000\;{\AA}$으로 변화시키며 보자력의 변화를 측정 하였다. 두께가 $30\;{\AA}$인 $SiO_{2}$ 층을 사이층으로 하여 전체 박막 두께를 $6,000\;{\AA}$으로 고정하고 7층까지 증착한 시편의 보자력과 포화 자화값을 측정하였다. 단층 박막 두께에 따른 자화용이 방향의 보자력은 두께가 증가할수록 감소하였으며 $3,000\;{\AA}$ 이상에서는 거의 변화가 없었다. FeN 다층 박막의 경우 층수가 증가함에 따라 보자력은 감소하였다. X 선 회절 선폭으로 부터 결정립의 크기를 계산한 결과 층수가 증가할수록 결정립의 크기가 $200\;{\AA}$에서 $120\;{\AA}$으로 점차 감소하였다. 최소 보자 력은 4층 박막에서 자화 곤란 방향으로 0.4 Oe을 얻었다. 투자율 측정 결과 최대 상대 투자율은 2,900이었으며, 이들 박막의 차단 주파수는 100 MHz 이상이었다.

• 한국진공학회지
• /
• 제15권4호
• /
• pp.410-420
• /
• 2006

Epitaxial 성장에서 screening 및 steering 효과 등과 같은 증착과정 중 나타나는 dynamic effects를 kinetic Monte Carlo 시뮬레이션으로 고찰하였다. 증착원자와 토대 원자와의 상호 작용을 엄밀하게 고려하기 위해 이 시뮬레이션 프로그램에 molecular dynamics 시뮬레이션을 결합시켰다. 기울어진 각도로 증착 시킬 경우 표면의 형상은 1) 증착 각도가 기울어짐에 따라 거칠기가 증가한다는 것, 2) 비대칭적인 언덕의 형성된다는 것, 그리고 3) 언덕의 면방향에 따라 비대칭적인 기울기를 갖는다는 세가지 특징을 보았다. 증착 각도나 온도 의존성에 대한 시뮬레이션 결과는 기존의 실험 결과와 잘 일치하는 것을 확인하였다. 기울어진 각도로 증착했을 때 나타나는 이러한 결과는 steering과 screening 효과에 따른 초기 증착 밀도의 불균일에 기인함을 알 수 있었고, 여기서 steering 효과가 screening 효과 보다 주요한 역할을 하는 것을 보았다. 시뮬레이션 계산에서 확인된 새로운 결과는 기울기 선택 (slope selection)이 이루어졌어도 언덕의 각 면이 단일한 기울기로 형성되어 있지 않고 여러 종류의 facet가 섞인 형태이며, 따라서 기울기 선택이 바로 facet 선택을 의미하지는 않는다는 것이다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.305-308
• /
• 2006

Advanced mobile communication devices require a bright, high information content display in a small, light-weight, low power consumption package. For portable applications flexible (or conformable) and rugged displays will be the future. In this paper we outline our progress towards developing such a low power consumption active-matrix flexible OLED $(FOLED^{TM})$ display. We demonstrate full color 100 ppi QVGA active matrix OLED displays on flexible stainless steel substrates. Our work in this area is focused on integrating three critical enabling technologies. The first technology component is based on UDC's high efficiency long-lived phosphorescent OLED $(PHOLED^{TM})$ device technology, which has now been commercially demonstrated as meeting the low power consumption performance requirements for mobile display applications. Secondly, is the development of flexible active-matrix backplanes, and for this our team are employing PARC's Excimer Laser Annealed (ELA) poly-Si TFTs formed on metal foil substrates as this approach represents an attractive alternative to fabricating poly-Si TFTs on plastic for the realization of first generation flexible active matrix OLED displays. Unlike most plastics, metal foil substrates can withstand a large thermal load and do not require a moisture and oxygen permeation barrier. Thirdly, the key to reliable operation is to ensure that the organic materials are fully encapsulated in a package designed for repetitive flexing, and in this device we employ a multilayer thin film Barix encapsulation technology in collaboration with Vitex systems. Drive electronics and mechanical packaging are provided by L3 Displays.

• Journal of Electrochemical Science and Technology
• /
• 제8권3호
• /
• pp.250-256
• /
• 2017

A graphene electrode with a novel in-plane structure is proposed and successfully adopted for use in supercapacitor applications. The in-plane structure allows electrolyte ions to interact with all the graphene layers in the electrode, thereby maximizing the utilization of the electrochemical surface area. This novel structure contrasts with the conventional out-of-plane stacked structure of such supercapacitors. We herein compare the volumetric capacitances of in-plane- and out-of-plane-structured devices with reduced multi-layer graphene oxide films as electrodes. The in-plane-structured device exhibits a capacitance 2.5 times higher (i.e., $327F\;cm^{-3}$) than that of the out-of-plane-structured device, in addition to an energy density of $11.4mWh\;cm^{-3}$, which is higher than that of lithium-ion thin-film batteries and is the highest among in-plane-structured ultra-small graphene-based supercapacitors reported to date. Therefore, this study demonstrates the potential of in-plane-structured supercapacitors with high volumetric performances as ultra-small energy storage devices.

• 한국세라믹학회지
• /
• 제46권2호
• /
• pp.175-180
• /
• 2009

Multilayer ceramic capacitors (MLCCs) have continually been made smaller in size and larger in capacity in resent years. However, the end termination electrode is still thick in many MLCCs. In this study, we used small grain glass frit to embody thin film and highly densification in the end termination by improve sintering driving force with well-dispersion and rising surface energy. Pastes were fabricated using size changed glass frit, such as 0.1 ${\mu}m$, 0.5 ${\mu}m$, 1.0 ${\mu}m$, 4.0 ${\mu}m$. Fabricated pastes were applied 05A475KQ5 chip and fired various sintering temperatures to analyze sintering behavior of pastes. Consequently, small glass frit used pastes have many merits than larger, such as well-dispersion, improve cornercoverage and surface roughness, possibility of low temperature sintering. However, we confirmed that small glass frit used pastes have narrow sintering window by rapid completion of sintering densification.

• 한국전기전자재료학회논문지
• /
• 제24권6호
• /
• pp.515-518
• /
• 2011

In this work, we designed and fabricated a multilayer thin film Pb(Zr,Ti)$O_3$ cantilever with a Si proof mass for low frequency vibration energy harvesting applications. A mathematical model of a mu lti-layer composite beam was derived and applied in a parametric analysis of the piezoelectric cantilever. Finally, the dimensions of the cantilever were determined for the resonant frequency of the cantilever. W e fabricated a device with beam dimensions of about 4,930 ${\mu}M$ ${\times}$ 450 ${\mu}M$ ${\times}$ 12 ${\mu}M$, and an integrated Si proof mass with dimensions of about 1,410 ${\mu}M$ ${\times}$ 450 ${\mu}M$ ${\times}$ 450 ${\mu}M$. The resonant frequency, maximum peak voltage, and highest average power of the cantilever device were 84.5 Hz, 88 mV, and 0.166 ${\mu}Wat$ 1.0 g and 23.7 ${\Omega}$, respectively. The dimensions of the cantilever were determined for the resonance frequency of the cantilever.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.169-169
• /
• 1999

We studied magnetic properties of co thin films deposited on Pd (111) surface, which attracted much attention recently due to the perpendicular magnetic anisotropy, using magnetic circular dichroism(MCD). Special attention was paid on the effect of Pd capping and interface roughness on the direction of magnetic easy axis, and for that purpose MCD signals for all Co thicknesses were measured with two different ways : in-plane and out-of-plane geometry. In case of bare Co films deposited on smooth Pd(111) surface, no MCD signal was observed under 4$\AA$ co thickness. At 4$\AA$ Co thickness, MCD signal at the out-of-plane geometry was observed, and for thicker Co films, only in-plane MCD signal was measured. This type of magnetic easy axis transition has been reported for other cases like Co/Pt system. The effect of 5$\AA$ Pd capping on these bare Co films made an remarkable change on the transition of magnetic easy axis. Out-of-plane MCD signals exists up to 20$\AA$ Co thickness, and disappears at 24$\AA$ Co thickness. In-plane MCD signals first appears at 10$\AA$ Co thickness and gradually increases up to 24$\AA$ Co thickness. Between 10$\AA$ and 20$\AA$ Co thickness, in-plane and out-of-plane MCD signal coexist. The formation of multi-domain structure or the existence of tilted magnetic easy axis is an possible scenario for such an interesting coexistence. The effect of interface roughness was also tested by measuring MCD signal on Co films deposited on un-annealed Pd(111) surface. Out-of-plane MCD signal was observed up to 8$\AA$ Co thickness and the anisotropy of MCD signal at 4$\AA$ Co thickness was very large with respect to that of Co film deposited on the smooth substrate. Above 8$\AA$ thickness, there exists only in-plane MCD signal. From above results, it was concluded that both Pd capping and interface roughness induce and reenforce the perpendicular magnetic anisotropy. The large perpendicular magnetic anisotropy of Co/Pd multilayer system made by sputtering method can be well understood from our results.

• 한국자기학회지
• /
• 제8권6호
• /
• pp.380-387
• /
• 1998

본 논문에서는 수소($H_2$)의 주입에 따라(자기적 성질)와 strain (elastic 성질)의 변화가 최대가 될 수 있는 Fe/Zr 다층박막으로 구성된 센서재료를 개발하였다. Sputtering (RF diode) 진공 적층 시스템을 이용하여 srqurntial supttering 빙식으로 변조파장($\lambda$)이 $3{\AA}{$\leq}{\lambda}{$\leq}50{\AA}$이고 $Fe_{80}Zr_{20}$의 성분을 가진 compositionally modulated(CM)된 Fe/Zr 다층박막을 적층 시킨 후 전기분해 방법으로 수소를 주입 시켜 수소에 의해 변화된 자화 및 strain 이 최대가 되는 Fe/Zr 박박을 선택하였다. 박막 재료가 수소화된 자기적 성질의 변화는 자화 및 stain 이 최대가 되는 Fe/Zr 박막을 선태하였다. 박막 재료가 수소화된 후의 자기적 성질의 변화는 히스테리시스 graph와 vibrating sample magnetometer (VSM)를 통해, 그리고 strain 의 변화는 laser heterodyne interferometer (LHI)등으로 분서되어 졌다. 선택된 최적의 센서재료는 single-mode 광섬유를 이용한 Michelson interometer의 sensing arm에 직접 coating 되어 주입된 수소의 양을 간접적으로 측정할 수 잇는 Fiber-optic H2 gas 센서에 응용되엇다. 개발된 센서는 진단하고자 하는 구조물 내의 부식(수소화에 의한) 정도를 손쉽고, 정확하게 감지할 수 있을 것으로 기대 되므로 비파괴 검사(non-destrucive test evaluation; NDE) 응용에 사용될 수 있다.

• 한국광학회지
• /
• 제13권4호
• /
• pp.363-369
• /
• 2002

디스플레이 기기에 사용할 수 있는 전도성 투과필터를 저방출(low-emissivity) 코팅인 [유전체|Ag|유전체] 구조를 이용하여 설계하였다. [$TiO_{2}$|Ti|Ag|$TiO_{2}$] 구조를 반복하고 어드미턴스 방법을 이용하여 가시광선 영역의 투과율을 높이고, 근적외선의 투과율은 낮게 하였다. 전도성 투과필터를 radio frequency(RF) 마그네트론 스퍼터링 방법으로 증착하고 설계한 스펙트럼과 비교하였으며, 필터의 광학적, 구조적, 전기적 특성들을 조사하였다. Ag 박막의 두께는 전기전도성을 높이기 위해 13㎚ 이상으로 증착하고, $TiO_{2}$박막은 가시광선 영역에서 투과율이 최대가 되는 24㎚로 증착하였다. 또한 Ag 박막의 산화를 막기 위해 매우 얇은 Ti 산화방지막을 증착하였으며, 다층구조로 갈수록 산화방지막의 두께를 더 두껍게 증착해야 하는 것을 확인하였다. 최종적으로 [$TiO_{2}$|Ti|Ag|$TiO_{2}$] 기본구조를 3번 반복하여 증착한 필터는 근적외선 차단 효과가 우수하고, 전자파 장해(electromagnetic interference; EMI)를 효과적으로 방지할 수 있는 2Ω/□ 이하의 낮은 면저항을 보였다.

• 한국재료학회지
• /
• 제14권9호
• /
• pp.607-613
• /
• 2004

This study was to investigate the surface properties of electrochemically oxidized Ti-6Al-7Nb alloy by anodic spark discharge technique. Anodizing was performed at current density 30 $mA/cm^2$ up to 300 V in electrolyte solutions containing $DL-{\alpha}$-glycerophosphate disodium salt hydrate($DL-{\alpha}$-GP) and calcium acetate (CA). Hydrothermal treatment was done at $300^{\circ}C$ for 2 hrs to produce a thin outermost layer of hydroxyapatite (HA). The bioactivity was evaluated from HA formation on the surfaces in a Hanks' solution with pH 7.4 at $36.5^{\circ}C$ for 30 days. The size of micropores and the thickness of oxide film increased and complicated multilayer by increasing the spark forming voltage. Needle-like HA crystals were observed on anodic oxide film after the hydrothermal treatment at $300^{\circ}C$ for 2 hrs. When increasing $DL-{\alpha}$-GP in electrolyte composition, the precipitated HA crystals showed the shape of thick and shorter rod. However, when increasing CA, the more fine needle shape HA crystals were appeared. The bioactivity in Hanks' solution was accelerated when the oxide films composed with strong anatase peak with presence of rutile peak. The increase of amount of Ca and P was observed in groups having bioactivity in Hanks' solution. The Ca/P ratio of the precipitated HA layer was equivalent to that of HA crystal and it was closer to 1.67 as increasing the immersion time in Hanks' solution.