• 멤브레인
• /
• 제28권5호
• /
• pp.297-306
• /
• 2018

본 총설은 분리막기술이 적용된 수소생산에 대한 개론으로, 특히, 암모니아를 수소운반체로 이용하는 수소생산에 대한 연구결과를 중점적으로 서술하였다. 암모니아를 수소운반체로 적용한 수소생산은 추가적인 탄소생성이 없다는 점 외에 여러 측면에 있어 이점이 있다. 많은 연구들이 고순도 수소 분리 및 생산을 위한 분리막 개발을 위해 진행되고 있으며, 이들 중 팔라듐을 기본으로 한 분리막(예를 들어, 다공성 세라믹 또는 다공성 금속 지지체와 팔라듐 합금의 얇은 선택층으로 이루어진 분리막)에 대한 연구가 활발하다. 반면에, 효율적인 암모니아 분해를 위해서는 주로 루테늄 촉매가 적용되고 있으며, 루테늄과 지지체 및 촉진제로 이루어진 루테늄에 기반을 둔 촉매에 대한 연구발표가 다수 존재한다. 수소생산을 위한 분리막 반응기 형태로는 충전층, 유동층, 그리고 마이크로반응기 등이 있으며, 이들의 최적화 및 원활한 물질전달 연구는 현재진행형이다. 또한, 높은 암모니아 분해율, 고순도 수소생산 및 높은 수소생산율을 얻기 위해 분리막과 촉매의 다양한 조합에 대한 연구 및 분리막과 촉매의 역할을 동시에 구현할 수 있는 분리막에 대한 연구가 발표되고 있다.

• 비파괴검사학회지
• /
• 제30권5호
• /
• pp.471-478
• /
• 2010

박막은 마이크로 전자 장치, 자기 기록 매체, 미세 기전 시스템 및 표면 코팅과 같은 다양한 응용에 있어서 매우 중요한 역할을 수행하는 재료이다. 이러한 박막의 재료 물성 값은 상응하는 거시 재료의 물성 값과 다를 수 있기 때문에 박막의 기계적 물성 값들을 신뢰성 있게 측정할 수 있는 시험법의 개발이 요구되어져 왔다. 본 연구에서는 종래의 약 처짐 시험법과 단축 인장 시험법의 한계성을 극복하기 위해 나노미터 이하의 면외 변위 측정 분해능을 갖는 백색광 간섭계를 채택한 새롭고 간편한 시험법을 개발하였다. 개발된 시험법의 유효성을 검증해 보기 위하여 스퍼터링을 포함한 마이크로 공정에 의해 자유지지 알루미늄 박막 시험편을 제작한 뒤 이를 이용하여 인장 물성 값을 측정하였다. 폭 0.5 mm, 두께 $1{\mu}m$인 시험편을 실리콘 다이상에 1~5개 제작하여 사용하였다. 모터 구동 팁, 하중계 및 6 자유도 정렬 장치로 구성된 시험기를 자체적으로 제작한 뒤 막 처짐 시험을 수행하였다. 시험기는 가능한 작게 제작하여 상용 백색광 간섭 현미경 아래에 설치 가능하도록 하였다. 백색광 간섭무늬를 이용하여 시험편과 시험기 사이의 정렬 맞춤을 수행하였다. 영 계수는 62 GPa, 항복점은 247 MPa로 측정되었다.

• Journal of Nutrition and Health
• /
• 제28권10호
• /
• pp.1022-1030
• /
• 1995

Saponins are glycosidic compounds present in many plant foods. They are characterized by their ability to lyse cell membranes due to their surface-active properties. Saponins are believed to interact primarily with cholesterol in the cell membrane. In this study, the interaction of soybean(SS) with cell membrane was investigated using erythrocytes as a model. Mechanisms of interaction was also investigated by measuring their binding capacity with different membrane lipid fractions. Throughout the study, gypsophilla saponin(GS) and quillaja saponin(QS) were used to evaluate the membranolytic activity of soybean saponins. All saponins released hemoglobin in a concentration-dependent manner. SS induced 40% hemolysis at the concentration of 400 ppm, however there was no increase in hemoglobin release above 400ppm concentration. 5ppm of GS and 8 ppm of QS hemolyzed 100% of erythrocytes. Isolation of SS fractions by thin layer chromatography revealed that only one non-polar saponin possesses strong hemolytic activity. When saponins were incubated decreased the release of cholesterol. When the hemolytic activity of saponins was measured in the presence of other major membrane lipid components, sphingomyelin significantly reduced the hemolytic activity of SS, while cholesterol reduced the activity of QS. GS showed high affinity to other component(s) in the incubation media as well as lipids. These results suggest that the membranolytic activity of saponins are related to their specific chemical structure, which determines the interaction behavior between saponins and different membrane components, and thereby influence the biological activity.

• Elastomers and Composites
• /
• 제50권4호
• /
• pp.292-296
• /
• 2015

Biomimetic artificial basilar membrane being a core part of artificial cochlear requires performance evaluation through aging test. To evaluate the aging properties of PVDF piezoelectric membrane used for artificial basilar membrane, its mechanical properties such as tensile strength and elastic modulus and piezoelectric property such as piezoelectric constant were measured. The aging test conditions and acceleration constants were calculated based on Arrhenius model. The changes in tensile strengths and elastic moduli measured were less than 10~20% after aging test equivalent for 10 years. The piezoelectric constants were decreased drastically to 80% of its initial value in the early stage of the aging test and expected to decrease slowly down to 65% over 10 years. The experimental results show the reliability of totally implantable novel artificial cochlear and will contribute its commercialization.

• 센서학회지
• /
• 제31권6호
• /
• pp.366-370
• /
• 2022

A 12 ㎛ pixel-sized 360 × 240 microbolometer focal plane array (MBFPA) was fabricated using a complementary metaloxide-semiconductor (CMOS)-compatible process. To release the MBFPA membrane, an amorphous carbon layer (ACL) processed at a low temperature (<400 ℃) was deposited as a sacrificial layer. The thermal time constant of the MBFPA was improved by using serpentine legs and controlling the thickness of the SiNx layers at 110, 130, and 150 nm on the membrane, with response times of 6.13, 6.28, and 7.48 msec, respectively. Boron-doped amorphous Si (a-Si), which exhibits a high-temperature coefficient of resistance (TCR) and CMOS compatibility, was deposited on top of the membrane as an IR absorption layer to provide heat energy transformation. The structural stability of the thin SiNx membrane and serpentine legs was observed using field-emission scanning electron microscopy (FE-SEM). The fabrication yield was evaluated by measuring the resistance of a representative pixel in the array, which was in the range of 0.8-1.2 Mohm (as designed). The yields for SiNx thicknesses of SiNx at 110, 130, and 150 nm were 75, 86, and 86%, respectively.

• Membrane and Water Treatment
• /
• 제13권2호
• /
• pp.63-72
• /
• 2022

Choline chloride-glycerol (1:2 mol), a natural deep eutectic solvent (NADES) is examined as a draw solution in forward osmosis (FO) for dewatering application. The NADES is easy to prepare, low in toxicity and environmentally benign. A polyamide thin film composite membrane was used. Characterization of the membrane confirmed porous membrane structure with good hydrophilicity and a low structural parameter (722 ㎛) suitable for FO application. A dilute solution of 20% (v/v) NADES was enough to generate moderate water flux (14.98 L m^-2h^-1) with relatively low reverse solute flux (0.125 g m^-2h^-1) with deionized water feed. Application in dewatering industrial wastewater feed showed reasonably good water flux (11.9 L m^-2h^-1) which could be maintained by controlling the external concentration polarization and fouling/scaling mitigation via simple periodic deionized water wash. In another application, clarified sugarcane juice could be successfully concentrated. Recovery of the draw solute was accomplished easily by chilling utilizing thermo responsive phase transition property of NADES. This study established that low concentration NADES can be a viable alternative as a draw solute for dewatering of wastewater and other heat sensitive applications along with a simple recovery process.

• Geomechanics and Engineering
• /
• 제16권4호
• /
• pp.385-397
• /
• 2018

This study evaluates the interfacial properties of composite specimens consisting of shotcrete and sprayed waterproofing membrane. Two different membrane prototypes were first produced and tested for their waterproofing ability. Then composite specimens were prepared and their interfacial properties assessed in direct shear and uniaxial compression tests. The direct shear test showed the peak shear strength and shear stiffness of the composites' interface decreased as the membrane layer became thicker. The shear stiffness, a key input parameter for numerical analysis, was estimated to be 0.32-1.74 GPa/m. Shear stress transfer at the interface between the shotcrete and membrane clearly emerged when measuring peak shear strengths (1-3 MPa) under given normal stress conditions of 0.3-1.5 MPa. The failure mechanism was predominantly shear failure at the interface in most composite specimens, and shear failure in the membranes. The uniaxial compression test yielded normal stiffness values for the composite specimens of 5-24 GPa/m. The composite specimens appeared to fail by the compressive force forming transverse tension cracks, mainly around the shotcrete surface perpendicular to the membrane layer. Even though the composite specimens had strength and stiffness values sufficient for shear stress transfer at the interfaces of the two shotcrete layers and the membrane, the sprayed waterproofing membrane should be as thin as possible whilst ensuring waterproofing so as to obtain higher strength and stiffness at the interface.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제29권3호
• /
• pp.241-249
• /
• 2007

An augmentation of the maxillary sinus floor facilitates placement of dental implants in the posterior atrophic maxilla. However, a maxillary sinus augmentation has potential complications that can lead to early failure and loss of the bone graft. One specific complication is sinus membrane perforation. Especially, large perforations may cause loss of the graft materials into the sinus and infection, so, early failure of the sinus lift. Attempts at managing sinus membrane perforations are difficult because of the limited access to them and friability of the thin Schneiderian membrane. Repair of sinus membrane perforations intraoperatively may be performed using a variety of techniques and materials, including sutures, collagen membranes, fibrin glue. Inspite of various repair technique, as has been reported extensively in the literature, large perforations represent an absolute contraindication to the continuation of surgery. But, we obtained clinically favorable results in cases that show repair of the perforated sinus membrane with a micro-suture technique by 4X Loupe ($Surgitel^{(R)}$ Loupe, General Scientific Corporation) in large perforation. The objective of this presentation is to report of several cases of repair of the perforated sinus membrane with micro-suture technique using 7.0 or 8.0 suture materials, to make a brief review of the literature about various technique managing perforated sinus membrane.

• Applied Microscopy
• /
• 제15권1호
• /
• pp.71-85
• /
• 1985

The ultrastructure on the dorsal vessel of 5-day-old cabbage butterfly, Pieris rapae L., was carried out using the transmission and scanning electron microscope. The results are as follows. 1) The aorta. The aorta is simple tubular type and consists of the inner and outer membrane of the myocardium and thick myocardium is located between them. However the inner membrane with $0.26{\mu}m$ thickness and outer membrane with $0.08{\mu}m$ are composed of fibrous materials, the former is composed of low and high densed fibrous materials and the latter appears homogeneous layer. The myocardium consists of typical striated muscles. The sarcomere with $1.6{\mu}m$ length and in cross section, each thick filaments are surrounded by $7{\sim}8$ thin filaments. The intercalated disc is joining the end of the two muscle cells, desmosomes and septate junctions are appeared between the neighboring muscle cells. 2) The heart. The heart composing of myocardium enclosed by its inner and outer membrane as the aorta has a series of well formed segmental chamber. The arrangement of myofilaments, cell adhensions and membrane elements are observed as same as at the aorta. The inner membrane of the heart is deeply invaginated into the myocardium than the outer membrane and a lot of well developed mitochondria with rod shape are aggregated in the folds. The longitudinally and transversely oriented tubule system formed by invagnation of the sarcolemma into the muscle bundle is built up dyad with the sarcoplasmic reticulum as the aorta. The slit is formed by deeply invagination of the inner membrane of myocadium toward the muscle layer and then the inner and outer membrane of myocardium are fused. Therefore, the ostium is formed between the myocardium and situated at the lateral side of the myocardium.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2004년도 Proceedings of the second conference of aseanian membrane society
• /
• pp.86-89
• /
• 2004

The present study reports the preparation of a compact ZSM-5 membrane showing high thermal stability and high separation factors, especially n-/i-butane isomers at high temperatures. ZSM-5 membrane was prepared on a porous $\alpha$-Al$_2$O$_3$ tube (an average pore diameter, ca. 100 nm) at 18$0^{\circ}C$ by the seed-assisted crystallization method. The XRD and SEM results showed that a thin zeolite layer (ca. 1 ${\mu}{\textrm}{m}$) was formed on the support surface. The single gas permeances of $N_2$, H$_2$, SF$_{6}$, n-butane, and i-butane were taken at 27$0^{\circ}C$. i-Butane permeance hardly changed after repeated thermal treatments up to 40$0^{\circ}C$, indicating the membrane is thermally stable. On the other hand, other single gas permeances increased when the membrane was further dried at 40$0^{\circ}C$, indicating thermal pretreatment at 27$0^{\circ}C$ could not remove all the adsorbed species in the membrane. i-Butane and SF$_{6}$ permeances were significantly lower than the permeances of smaller molecules, indicating that the membrane has a low concentration of defects. The ideal selectivities at 27$0^{\circ}C$ were 61 for $H_2$/i-butane and 47 for $H_2$/SF$_{6}$. The temperature dependency of n/i-butane ideal selectivities and separation factors for an equimolar n/i-butane mixture was studied. The ideal selectivity showed a maximum of 36 at 30$0^{\circ}C$. The separation factors increased with temperature and reached around 12 at 300-40$0^{\circ}C$, which were much higher than those reported in the literature.ature.