• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.6
• /
• pp.1015-1022
• /
• 2023

In this paper, we propose DLP(Dual Linear Polarization) antenna with aperture coupled feeding structure for private network. The proposed antenna has general aperture coupled structure and design two port between top and bottom layer to obtain the enhanced isolation. Also, The size of each substrate(top and bottom layer) is 34.0 mm(W)×34.0 mm(L), which is designed on the FR-4 substrate which thickness (h) is 1.0 mm, and the dielectric constant is 4.4. Also, the size of patch antenna is 12.70 mm(W2)×14.60 mm(L3), and it is located on the top layer. The size of feeding line is 24.0 mm(W2)×1.6 mm(L3), and is located at the bottom layer Also, rectangular slot is located on the ground plane between top layer and bottom layer. From the fabrication and measurement results, bandwidths of 300 MHz (4.52 to 4.82 GHz) for feeding port 1, and 170 MHz (4.65 to 4.82 GHz) for feeding port 2 are obtained on the basis of -10 dB return loss and transmission coefficient S21 is got under the -30 dB. Also, cross polarization isolation between each feeding port obtained

• Spatial Information Research
• /
• v.10 no.2
• /
• pp.247-261
• /
• 2002

There are much damage of people and property because of heavy rain every year. Especially, there are problem to major facility such as dam, bridge, road, tunnel, and industrial complex in the ground stability. So the counter plan for landslide or ground failure must be necessary In the study, the technique of regional landslide susceptibility assessment near the Ulsan petrochemical complex and Kumgang railway bridge was developed and applied using GIS. For the assessment, the geological structures such as bedding and fault were surveyed and the geological structure, topographic, soil, forest, and land use spatial database were constructed using CIS. Using the spatial database, the factors that influence landslide occurrence, such as slope, aspect, curvature and type of topography, texture, material, drainage and effective thickness of soil, type, age, diameter and density of forest, and land use were calculated or extracted from the spatial database. For application of geological structure, the geological structure line and fault density were calculated. Landslide susceptibility was analyzed using the landslide-occurrence factors by probability method that is summation of landslide occurrence probability values per each factors range or type. The landslide susceptibility map can be used to assess ground stability to protect major facility.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.5
• /
• pp.879-886
• /
• 2008

This paper addresses the analysis and the design optimization of differential interconnects for Low-Voltage Differential Signaling (LVDS) applications. Thanks to the differential transmission and the low voltage swing, LVDS offers high data rates and improved noise immunity with significantly reduced power consumption in data communications, high-resolution display, and flat panel display. We present an improved model and new equations to reduce impedance mismatch and signal degradation in cascaded interconnects using optimization of interconnect design parameters such as trace width, trace height and trace space in differential flexible printed circuit board (FPCB) transmission lines. We have carried out frequency-domain full-wave electromagnetic simulations, time-domain transient simulations, and S-parameter simulations to evaluate the high-frequency characteristics of the differential FPCB interconnects. The 10% change in trace width produced change of approximately 6% and 5.6% in differential impedance for trace thickness of $17.5{\mu}m$ and $35{\mu}m$, respectively. The change in the trace space showed a little change. We believe that the proposed approach is very helpful to optimize high-speed differential FPCB interconnects for LVDS applications.

• Korean Journal of Poultry Science
• /
• v.32 no.2
• /
• pp.143-147
• /
• 2005

This study was conducted to evaluate the feeding value of the Flammulina veluipes media by-product(FMB) in laying hens(Hy-Line Brown). A total of three hundreds sixty were fed corn-soy based experimental diets containing 0(control), 5.0(T1), and $10\%(T2)$ FMB for 12 weeks. There were no significant differences among the treatments in egg production, egg weight, egg mass, feed conversion and viability during the experimental period. Feed intake was significantly(P<0.05) lowered in control(120.5g) than 72(123.9g). There were no significant differences among the treatments eggshell breaking strength, thickness and haugh unit, whereas the yolk color of T1 and T2 were significantly love. than control(p<0.05). In conclusion, the FMB can be used as resource of feed in laying hen feed at $5.0\%$ level without effect on performance and egg qualify. However, dietary pigments must be added when the FMB was used as a feed ingredients more than $10\%$ in diets.

• Journal of Korea Water Resources Association
• /
• v.54 no.8
• /
• pp.553-566
• /
• 2021

River confluence is often characterized by shear layer and the associated strong mixing. In natural rivers, the main channel and its tributary can be separated by the shear layer using contrasting colors. The shear layer can be easily observed using aerial images from satellite or unmanned aerial vehicles. This study proposes a low-cost identification method extracting geographic features of the shear layer using RGB aerial image. The method consists of three stages. At first, in order to identify the shear layer, it performs image segmentation using a Gaussian mixture model and extracts the water bodies of the main channel and tributary. Next, the self-organizing map simplifies the flow line of the water bodies into the 1-dimensional curve grid. After that, the curvilinear coordinate transformation is performed using the water body pixels and the curve grid. As a result, the shear layer identification method was successfully applied to the confluence between Nakdong River and Nam River to extract geometric shear layer features (confluence angle, upstream- and downstream- channel widths, shear layer length, maximum shear layer thickness).

• Composites Research
• /
• v.18 no.2
• /
• pp.20-29
• /
• 2005

To evaluate the flexural deformation and strength of composite motor case above the glass transition temperature$(T_g),\;170^{\circ}C$, of resin material, a finite element analysis(FEA) model in which material non-linearity and progressive failure mode were considered was proposed. The laminated flexural specimens which have the same lay-up and thickness as the composite motor case were tested by 4-point bending test to verify the validity of FEA model. Also. mechanical properties in high temperature were evaluated to obtain the input values for FEA. Because the material properties related to resin material were highly deteriorated in the temperature range beyond $T_g$, the flexural stiffness and strength of laminated flexural specimen in $200^{\circ}C$ were degraded by also $70\%\;and\;80\%$ in comparison with normal temperature results. Above $T_g$, the failure mode was changed from progressive failure mode initiated by matrix cracking at $90^{\circ}$ ply in bottom side and terminated by delamination at the center line of specimen to fiber compressive breakage mode at top side. From stress analysis, the progressive failure mechanism was well verified and the predicted bending stiffness and strength showed a good agreement with the test results.

• Progress in Medical Physics
• /
• v.26 no.1
• /
• pp.12-17
• /
• 2015

The purpose of the Monte Carlo simulation study was to provide the optimized nozzle design to satisfy the beam conditions for biomedical researches in the Korean heavy-ion accelerator, RAON. The nozzle design was required to produce $C^{12}$ beam satisfying the three conditions; the maximum field size, the dose uniformity and the beam contamination. We employed the GEANT4 toolkit in Monte Carlo simulation to optimize the nozzle design. The beams for biomedical researches were required that the maximum field size should be more than $15{\times}15cm^2$, the dose uniformity was to be less than 3% and the level of beam contamination due to the scattered radiation from collimation systems was less than 5% of total dose. For the field size, we optimized the tilting angle of the circularly rotating beam controlled by a pair of dipole magnets at the most upstream of the user beam line unit and the thickness of the scatter plate located downstream of the dipole magnets. The values of beam scanning angle and the thickness of the scatter plate could be successfully optimized to be $0.5^{\circ}$ and 0.05 cm via this Monte Carlo simulation analysis. For the dose uniformity and the beam contamination, we introduced the new beam configuration technique by the combination of scanning and static beams. With the combination of a central static beam and a circularly rotating beam with the tilting angle of $0.5^{\circ}$ to beam axis, the dose uniformity could be established to be 1.1% in $15{\times}15cm^2$ sized maximum field. For the beam contamination, it was determined by the ratio of the absorbed doses delivered by $C^{12}$ ion and other particles. The level of the beam contamination could be achieved to be less than 2.5% of total dose in the region from 5 cm to 17 cm water equivalent depth in the combined beam configuration. Based on the results, we could establish the optimized nozzle design satisfying the beam conditions which were required for biomedical researches.

• Korean Journal of Poultry Science
• /
• v.35 no.1
• /
• pp.21-27
• /
• 2008

This study was conducted to evaluate the effects of mineral and vitamin-enhanced supplementation on egg production, egg quality and concentrations of calcium and phosphorus in serum of spent laying hens. A total of 240 (72-wk-old) Hyline brown commercial hens were used in the current trial for 4 weeks. Dietary treatments included 1) CON (basal diet), 2) ESS1 (basal diet + Egg shell strengthen 0.1%), 3) ESS2 (basal diet + Egg shell strengthen 0.2%) and 4) FESS (basal diet + Fe egg shell strengthen 0.2%). During the overall period, egg production was increased in CON and ESS2 treatments compared with ESS1 treatment (P<0.05). Egg shell breaking strength and final egg shell thickness were significantly higher in ESS2 treatment than CON and FESS treatments (P<0.05). Egg yolk color index was significantly lower in ESS1 treatment than other treatments (P<0.05). Moreover, Haugh unit was significantly lower in ESS1 and FESS treatments than CON treatment (P<0.05). Mineral- and vitaminenhanced supplementation did not affect either egg shell color or calcium and phosphorus concentration in serum. In conclusion, mineral- and vitamin- enhanced supplementations of laying hens diet are helpful in improving egg shell breaking strength and thickness by supplementation of Egg shell strengthener 0.2%.

• Science of Emotion and Sensibility
• /
• v.10 no.1
• /
• pp.99-111
• /
• 2007

In order to identify tactile sensibility factors of traditional silk fabrics and to provide prediction models for the sensibility factors by mechanical properties, seventeen different traditional silk fabrics were evaluated in terms of both tactile sensation and sensibility by using a modified magnitude estimation line scale Gongdan and Newttong with lower values for surface roughness(SMD), bending rigidity(B), and compression resilience(RC) were rated as softer, smoother, fluffier, and more pliable in tactile sensation than any other traditional silk fabrics whereas Nobangju haying higher B, SMD, and tensile resilience(RT) was touched as crisper, more rustling, and springier. Three different tactile sensibility factors including 'Feminine', 'Natural', and 'Casual' were obtained significantly by grouping fifteen different tactile sensibility descriptors. In the prediction models sensibility 'Feminine' was explained positively by SMD, which was supported by the fact that both Gongdan and Newtton were perceived as more feminine. Sensibility 'Natural' that was felt stronger as for Myoungju and Sa was predicted negatively by both fabric thickness(T) and RT. Finally, RC, elongation at maximum load (EM), and T predicted sensibility 'Casual' negatively, which results in its higher factor scores for Myoungju and Shantung, respectively.

• Korean Journal of Poultry Science
• /
• v.34 no.3
• /
• pp.173-180
• /
• 2007

This study was conducted to evaluate conjugated linoleic acid (CLA) precursor and produce supplementation on egg production, egg quality and blood immunological parameters in laying hens. The total of 252 (32-wk) Hy-line brown commercial hens were used for 5 weeks. Dietary treatments included 1) CON (basal diet + oat 1% + soybean oil 1%), 2) WOS (basal diet + whey 0.5% + oat 0.5% + soybean oil 1%), 3) WS (basal diet+ whey 1% + soybean oil 1%), 4) WOCLA (basal diet + whey 0.5% + oat 0.5% + CLA produce 1%), 5) WCLA (basal diet + whey 1% + CLA produce 1%) and 6) FOCLA (basal diet + Fish oil 0.5% + oat 1% + CLA produce 0.5%). For 4 weeks egg shell thickness was higher in WOS and FOCLA treatments than WOCLA and WCLA treatments (P<0.05). Egg weight was significantly increased (P<0.05) in WOS and FOCLA treatments compared to WS and WCLA treatments for 4 weeks. From 4 to 5 weeks yolk high, yolk color and haugh unit were significantly higher in FOCLA treatment than CON treatment (P<0.05). IgG concentration of blood was increased in WOS and FOCLA treatments compared to CON, WS and WOCLA treatments(P<0.05). In conclusion, fish oil, CLA produce and oat supplementation in laying hens diet improve egg shell thickness, yolk high, yolk color and haugh unit, also, CLA precursor supplementaion in laying hens diet improve IgG concentration of blood higher than CON treatment.