• Journal of Animal Science and Technology
• /
• v.45 no.3
• /
• pp.377-386
• /
• 2003

A study was conducted to evaluate seasonal variations in chemical composition of food waste (FW) and its feeding effects on growth performance and pork quality in finishing pigs. FW was collected for 1 year (6 times a month) to establish a database for use of FW as a feed ingredient. For a feeding trial (8 weeks), a total of 117 pigs ${\times}$D; 54.80$\pm$4.60kg) were used to evaluate the processing effects of FW. Treatments were: Control (a corn-soybean meal diet without FW), simple dried FW (SD) and vacuum fermented FW (VF). The gross energy, crude protein, crude fat, ash, calcium and phosphorus in FW (DM, average of 4 seasons) were 5,111kcal/kg, 22.92%, 14.31%, 15.48%, 2.7% and 1.05%, respectively. Among seasons, the energy and crude protein contents were the highest (p<0.05) in winter and summer, respectively. In lactic acid bacterial counts, there was no difference between SD and VF. Pigs fed the control diet grew faster (p<0.05) than those fed diets containing food wastes, but not feed conversion ratio. There were no differences in production traits between SD and VF. No differences were also found in dressing percentage, backfat thickness, and pork quality (color, drip loss and TBARS) among treatments. The feed cost (￦/kg body weight) was lower in pigs fed FW than those fed a control diet. In conclusion, a pelleted diet containing food waste less than 20% would reduce feed cost in finishing pigs. However, it seems that a vacuum fermentation of food waste is not necessary for diet processing.

• Journal of Animal Science and Technology
• /
• v.48 no.3
• /
• pp.401-414
• /
• 2006

Twenty eight Holstein steers 12 months old and weighing about 300kg were andomly allotted into one of four groups being fed ammoniated rice straw(ARS) and substituted 30%, 40% and 50% crushed bamboo chip for ARS to determine the effects of different levels of bamboo chip on performance, digestibility and carcass characteristics. Daily weight gain was reduced as the substitution levels of bamboo chip for ARS as a roughage source increased but there were no differences in daily weight gain between steers fed ARS alone and 30% bamboo chip for ARS. Concentrates intakes were not different between treatments by the substitution levels of bamboo chip for the whole fattening period. Roughage intake tended to increase as the substitution levels of bamboo chip increased. Total feed intake was not affected by the substitution levels of bamboo chip. However, feed efficiency got worse with increasing levels of bamboo chip. Animals fed the roughage substituting 30% bamboo chip for ARS were higher in profit by 13% than animals fed ARS alone as a roughage source. Digestibilities of Dry matter(DDM) and crude fiber(DCF) were highest in animals fed ARS alone as a roughage source. DDM's were lower in higher substitution levels of crushed bamboo chip but there were no differences in DCF among animals fed different levels of bamboo chip as a roughage source. Crude protein digestibility was not affected by ammoniated rice straw or by the different levels of bamboo chip. Dressing percentage and backfat thickness were not affected by ammoniated rice straw or by the levels of bamboo chip but ribeye area was narrowed as the levels of bamboo chip increased. Beef color, fat color, texture, maturity and marbling score were not affected by feeding of ammoniated rice straw or by the levels of bamboo chip. According to these results, it may be concluded that profit can increase when Holstein bulls are castrated and roughage containing ammoniated rice straw plus 30% bamboo chip is offered.

• Journal of Animal Science and Technology
• /
• v.47 no.4
• /
• pp.593-606
• /
• 2005

Present study was conducted to investigate the optimal feeding levels for producing the high quality meat on the basis of the information deriving from the comparison of the growth performance and carcass characteristics among breeds(Holstein vs F1, Holstein♀×Hanwoo♂), sex(steer vs heifer) and interaction between breed and sex. Thirty two animals on 4 treatments(i.e. eight head each) were used for 540 days from seven to 24 months of age. The results obtained are summarized as follows; the range of average daily gains was 0.733 to 1.018, 0.994 to 1.255, 0.947 to 1.259 and 0.736 to 0.824kg for the growing, the early-fattening, the mid- fattening and the finishing periods, respectively. The range of average daily gains for the entire period was 0.882 to 1.061kg. The gains were higher for Holstein(7.3%) and the steers(10.5%) than F1 and the heifers, respectively. Concentrates and total digestible nutrients intakes per kg gain were higher for Holstein and the heifers than F1 and the steers, respectively. These findings may indicate that feed utilization is higher for Holstein than F1, and higher for the steers than the heifers. In carcass characteristics, back fat thickness was thicker for Holstein than F1, and rib-eye area was smaller for Holstein than F1. The rib-eye area per kg carcass weight was larger for F1 and the heifers than Holstein and the steers, respectively. Meat color was better for Holstein than F1, but the sex distinction did not show any differences. In physicochemical properties of longissimus dorsi, shear force, cooking loss, water holding capacity and the panel test scores of juiciness, tenderness and flavor for F1 and the heifers were better than those for Holstein and the steers, respectively. According to the above results, we may conclude that F1 and heifers rather than Holstein and steers are recommended for high quality meat production. In steers and heifers of Holstein and F1, the optimal feeding levels may be 1.9% of apparent body weight for concentrates and 25% of concentrates intake for rice straw.

• Journal of Animal Science and Technology
• /
• v.54 no.1
• /
• pp.9-14
• /
• 2012

The purpose of this study was to estimate heritabilities and genetic correlations for reproductive and productive traits and to apply their estimates to selection strategies in a swine population. Reproductive and productive traits considered in this study were number of born alive piglet (NBA), number of weaned piglet (NW), loin eye area (LEA), days to 90 kg (D90KG), back fat thickness (BF), and lean meat content (LEAN). Data were collected from 9,886 litters on 2,447 sows for reproductive traits and 10,181 gilts and boars for productive traits from Jan. 2000 to Dec. 2008 in a swine GGP farm. The statistical model to estimate genetic parameters for considering traits was a multiple traits animal model with including animal and maternal additive effects and litter effects on reproductive traits and animal additive effects on productive traits as random as well as some of fixed effects. For estimating (co) variance components of several random effects, restricted maximum likelihood methodology was used on this assumed model. The estimated heritabilities by animal additive effects and maternal effects were 0.07 and 0.02 for NBA and 0.03 and 0.02 for NW, respectively. Genetic correlation estimate for direct genetic effects between NBA and NW was 0.14. Heritability estimates for direct genetic effects were 0.19, 0.39, 0.36, and 0.43 for LEA, D90KG, BF and LEAN, respectively. The genetic correlation of LEA with LEAN was 0.35. Productive traits were antagonistically correlated with reproductive traits. From these results it is concluded that, if selection is done for strong positive effects of reproductive traits, then this would decline productive performance.

• Journal of Animal Science and Technology
• /
• v.51 no.5
• /
• pp.395-406
• /
• 2009

Fifty four Hanwoo steers in final fattening period were assigned to 3 groups control, top dressed $PROSOL^{(R)}$ as an emulsifier (TP) and DSP group (experimental diet made to down spec of nutrients with $PROSOL^{(R)}$, which is sodium stearoyl-2-lactylate), based on the body weight (647.96${\pm}$41.31 kg) and months of age (27.3${\pm}$0.8 mo), and the experiment was conducted to establish the reasonable fattening method of Hanwoo steers for 91 days. Average daily body gains during trial were 0.94, 0.84 and 0.98 kg in control, TP and DSP, respectively (P=0.011). DDMI/ADG of TP group tend to lightly improving compared to control and DSP group (P=0.692). There was no effect of supplementation of the $PROSOL^{(R)}$ in concentrates on growth rate, feed efficiency and shrinkage in Hanwoo steers during the short final fattening period. MQI from TP and DSP was not different based on the rib-eye area and carcass weight in carcass than that from control. Back fat thickness tended to be thicker than control (P>0.05). Marbling score, texture and maturity for TP and DSP was abundantly to increase compared to control (P<0.003). There was significantly increment in supplemented $PROSOL^{(R)}$ (P<0.0001). The meat quality grade of control, TP and DSP were 2.94, 3.78 and 4.50, respectively. Related to this result, the auction price (carcass/kg) were gained significantly (P<0.003) from control (17,560), TP (18,586) and DSP (19,266 won) so which the monetary return was the highest in DSP and the differences was recognized between TP and DSP. Percentage over 1st grade appeared in control, TP and DSP were 55.4, 88.9 and 100.0%, respectively. These results supported the hypothesis that supplementation of emulsifier improve the marbling score and the carcass quality grade by increased digestibilities of the feed fat in Hanwoo steers in fattening period.

• Journal of Animal Science and Technology
• /
• v.52 no.5
• /
• pp.427-434
• /
• 2010

This study was conducted to investigate the growth performance and meat quality improvement according to castration, optimal feeding management and ruminally protected amino acid-enriched fatty acid (RPAAFA) for the unselected Hanwoo bulls in the performance test. Bulls were castrated at approximately 14 months of age. Sixteen Hanwoo steers, 15 months of age and weighing $412.9{\pm}24.9kg$, were distributed into 2 groups. Steers were fed a basal diet supplemented with RPAAFA at 0 g (control) or 100 g (treatment), respectively for 12 months. Steers were slaughtered at 27 months of age. Average daily gain for treatment tended to be higher (p=0.10) than that of control, whereas feed conversion ratio tended to be lower (p=0.07) in treatment than in control. The supplementation of RPAAFA did not affect rib eye area, back fat thickness, meat color, fat color, texture and maturity. The appearance rates of yield 'A' grade and high quality grade ($1^{++}$, $1^+$ and 1) were higher in treatment than in control. The content of moisture, fat, protein and ash in longissimus muscles were similar between control and treatment. The supplementation of RPAAFA did not affect water-holding capacity, oxidation and reduction potential, myoglobin and fatty acid contents in longissimus muscles. Thus, present results indicate that castration, optimal feeding management and RPAAFA may be recommended for improving growth performance and quality grade of the unselected Hanwoo bulls in the performance test.

• Journal of Animal Science and Technology
• /
• v.49 no.6
• /
• pp.801-818
• /
• 2007

This study was carried out to determine the effects of processing methods of barley as a proper source of grain in diets of Hanwoo on fermentation pattern in the rumen fluid and digestibility of the diets, the growth performance and carcass characteristics of Hanwoo. The degree of ruminal pH change in the cows fed diets of the Corn(corn basis) and GDRB(ground and dry-rolled barley) tended to be greater than those in the cows fed other two diets (ground barley, GB and dry-rolled barley, DRB). The diet of GDRB showed the lowest ruminal pH(5.5), indicating the rapid degradation of the diet in the rumen. Although ammonia concentration was not affected by diet, the GR and DBR diets maintained the low concentrations of ruminal ammonia compared with other two treatments. And the effects of feeding processed barley grain on body weight gain and meat quality of Hanwoo steers were as follows. Steers fed DRB diet had the highest body weight, 683.0kg at 28 months old, while those fed the GDRB showed the lowest body weight, 653.3kg. The average daily gain(ADG) was similar between the steers fed Corn and GR throughout the whole period, but the GDRB showed the lowest ADG. The steers fed the DRB showed the significant increase in ADG(0.89kg/d from 19 to 23 months old and 0.43kg/d from 24 to 28 months old) compared with those fed other diets. Feeding diets containing corn and/or barley did not influence live body weight, cold carcass weight, carcass yield, back-fat thickness and carcass grade of Hanwoo steers.

• Journal of Biomedical Engineering Research
• /
• v.25 no.2
• /
• pp.157-163
• /
• 2004

Nitrogen ion implantation and ion plating techniques were applied for improvement of the wear resistance of metallic implant materials. In this work, the wear dissolution behaviour of a nitrogen ion implanted super stainless steel (S.S.S, 22Cr-20Ni-6Mo-0.25N) was compared with those of S.S.S, 316L SS and TiN coated 316L SS. The amounts of Cr and Ni ions worn-out from the specimens were Investigated using an electrothermal atomic absorption spectrometry. Furthermore, the Ti(Grade 2) disks were coated with TiN, ZrN and TiCN by use of low temperature arc vapor deposition and the wear resistance of the coating layers was compared with that of titanium. The chemical compositions of the nitrogen ion implanted and nitride coated layers were examined with a scanting auger electron spectroscopy. It wat observed that the metal ions released from the nitrogen ion implanted S.S.S surface were significantly reduced. From the results obtained, it was shown that the nitrogen ion implanted zone obtained with 100 KeV ion energy was easily removed within 200,000 revolutions from a wear dissolution testing under a similar load condition when applied to artificial hip joint. The remarkable improvement in wear resistance weir confirmed by the nitrides coated Ti materials and the wear properties differ greatly according to the chemical composition of the coating layers. for specimens with the same coating thickness of about 3$\mu\textrm{m}$, TiCN coated Ti showed the highest wear resistance. However, after removing the coating layers, the wear rates of all nitrides coated Ti reverted to their normal rates of below 10,000 revolutions from Ti-disk-on-disk wear testing under the same load condition. From the results obtained, it is suggested that the insufficient depth of the 100 Kel N$\^$＋/ ion implanted zone and of the nitrides coated layers of 3$\mu\textrm{m}$ are subject to restriction when used as frictional parts of load bearing implants.

• The Journal of Korean Society for Radiation Therapy
• /
• v.18 no.1
• /
• pp.21-28
• /
• 2006

Purpose: The purpose of this study is to find a optimal beam spoiler condition on the dose distribution near the surface, when treating a squamous cell carcinoma of the head and neck and a lymphatic region with 10 MV photon beam. The use of a optimal spoiler allows elivering high dose to a superficial tumor volume, while maintaining the skin-sparing effect in the area between the surface to the depth of 0.4 cm. Materials and Methods: The lucite beam spoiler, which were a tissue equivalent, were made and placed between the surface and the photon collimators of linear accelerator. The surface-dose, the dose at the depth of 0.4 cm, and the maximum dose at the dmax were measured with a parallel-plate ionization chamber for $5{\times}5cm\;to\;30{\times}30cm^2$ field sizes using lucite spoilers with different thicknesses at varying skin-to-spoiler separation (SSS). In the same condition, the dose was measured with bolus and compared with beam spoiler. Results: The spoiler increased the surface and build-up dose and shifted the depth of maximum dose toward the surface. With a 10 MV x-ray beam and a optimal beam spoiler when treating a patient, a similer build-up dose with a 6 MV photon beam could be achieved, while maintaining a certain amount of skin spring. But it was provided higher surface dose under SSS of less than 5 cm, the spoiler thickness of more than 1.8 cm or more, and larger field size than $20{\times}20cm^2$ provided higher surface dose like bolus and obliterated the spin-sparing effect. the effects of the beam spoiler on beam profile was reduced with increasing depths. Conclusion: The lucite spoiler allowed using of a 10 MV photon beam for the radiation treatment of head and neck caner by yielding secondary scattered electron on the surface. The dose at superficial depth was increased and the depth of maximum dose was moved to near the skin surface. Spoiling the 10 MV x-ray beam resulted in treatment plans that maintained dose homogeneity without the consequence of increased skin reaction or treat volume underdose for regions near the skin surface. In this, the optimal spoiler thickeness of 1.2 cm and 1.8 cm were found at SSS of 7 cm for $10{\times}10cm^2$ field. The surface doses were measured 60% and 64% respectively. In addition, It showed so optimal that 94% and 94% at the depth of 0.4 cm and dmax respectively.

• The Journal of Korean Society for Radiation Therapy
• /
• v.22 no.2
• /
• pp.131-134
• /
• 2010

Purpose: TOMO therapy treatment for a relatively long run Beam time and temperature-sensitive detector, such as CT clinics in optimal temperature ($20~21^{\circ}$) to maintain a constant temperature in addition to its own Chamber Cooling system is activating. TOMO This clinic has been reduced in the patients' body temperature to keep the sheets and covers over the treated area. Therefore, these materials for any changes in the organization gives the dose were analyzed. Materials and Methods: To compare changes in the organization Dose Phantom cheese (Cheese Phantom) were used, CT-simulation taking the center point of the cheese phantom PTV (Planning Target Volume, treatment planning target volume) by setting Daily dose 200 cGy, 3 meetings planned treatment. PTV, PTV +7 cm, PTV +14 cm, the total count points on the phantom using the Ion chamber cover without any substance to measure the dose, and one of the most commonly used treatment, including the frequently used four kinds of bedding materials (febric 0.8 mm, gown 1.4 mm, rug, 3.3 mm, blanket 13.7 mm) and covered with a phantom and the dose measured at the same location were analyzed 3 times each. Results: PTV, PTV +7 cm, PTV +14 cm from the point of any substance measured in the state are covered with four kinds of materials (fabric, gown, rug, blanket) was measured in the covered states and compares their results, PTV respectively -0.17%, -0.44%, -0.53% and -0.9% change, PTV +7 cm, respectively -0.04%, +0.07%, +0.06%, +0.07%, were changed, PTV +14 cm, respectively 0%, -0.06%, -0.02%, +0.6%, respectively. Conclusion: These results TOMO treatment to patients to maintain their body mass by using PTV thickness of the material decreased in proportion to. PTV +7 cm, but showed slight changes in the point, PTV +14 cm at the point of the dose was increased a little. Sejijeom all the difference in treatment tolerance ${\pm}3%$ range, this is confirmed in the coming treatment will not affect the larger should be considered.