• Korean Journal of Heritage: History & Science
• /
• v.44 no.1
• /
• pp.4-29
• /
• 2011

Paleoenvironments of the shell deposit-bearing sequence in the Hasandong Formation at Daesong-ri area, Hadong-gun, Korea, are interpreted on the basis of sedimentary facies and taphonomy of the shell deposits, with a discussion of their stratigraphic implications. A shell deposit-bearing sequence without reddish beds is mostly grayish, and the bedding is laterally extensive. These deposits are interpreted to have been formed in sandflats, mudflats, and shallow lakes generated by flooding on an alluvial plain. The shell deposits are classified into three types according to the occurrence, and the concentration of a single species of Brotiopsis wakinoensis in the shell deposits is deemed to have been attributed to the exclusive inhabitation of the genus Brotiopsis. Type 1 and 2 shell deposits are interpreted to have been fossilized in sandflats and mudflats after death in their habitat of shallow lakes and subsequent transformation by sheetflooding and lake flooding. Type 3 shell deposits are interpreted to have been fossilized in their habitat of shallow lakes during a stabilized period of lake development. The development of the shell deposit-bearing lacustrine sequence in a few tens of meters in thickness in the Hasandong Formation of fluvial deposits is compared to the shift of depositional environments from the Hasandong Formation (fluvial deposits) through the Jinju Formation (lacustrine deposits) to the Chilgok Formation (alluvial plain deposits), which suggests that additional lithostratigraphic classification is needed in the Hasandong Formation. The shell deposits at the study area can provide valuable data to understanding the paleoenvironments during the Early Cretaceous Period of Korea, and should give basic data to evaluate the value of the Cretaceous mollusc deposits in Korea as a geological heritage.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.3
• /
• pp.160-169
• /
• 2019

Purpose: The purpose of this study was to evaluate the antimicrobial effects of a toothbrush with light-emitting diodes (LEDs) on periodontitis-associated dental biofilm attached to a zirconia surface by static and dynamic methods. Materials and Methods: Zirconia disks (12 mm diameter, 2.5 mm thickness) were inserted into a 24-well plate (static method) or inside a Center for Disease Control and Prevention (CDC) biofilm reactor (dynamic method) to form dental biofilms using Streptococcus gordonii and Fusobacterium nucleatum. The disks with biofilm were subdivided into five treatment groups-control, commercial photodynamic therapy (PDT), toothbrush alone (B), brush with LED (BL), and brush with LED+erythrosine (BLE). After treatment, the disks were agitated to detach the bacteria, and the resulting solutions were spread directly on selective agar. The number of viable bacteria and percentage of bacterial reduction were determined from colony counts. Scanning electron microscopy (SEM) was performed to visualize alterations in bacterial morphology. Results: No significant difference in biofilm formation was observed between dynamic and static methods. A significant difference was observed in the number of viable bacteria between the control and all experimental groups (P < 0.05). The percentage of bacterial reduction in the BLE group was significantly higher than in the other treated groups (P < 0.05). SEM revealed damaged bacterial cell walls in the PDT, BL, and BLE groups, but intact cell walls in the control and B groups. Conclusion: The findings suggest that an LED toothbrush with erythrosine is more effective than other treatments in reducing the viability of periodontitis-associated bacteria attached to zirconia in vitro.

• Korean Journal of Heritage: History & Science
• /
• v.51 no.4
• /
• pp.108-119
• /
• 2018

"The Collection of Yi Chungmugong" manuscript is a hand-written manuscript of the volume 1 consisting of the Collection, published in 1795 and it seems to have completed the contents of the book by correcting the first part of the book before print. The book adopted a form of Seonjangbon(線裝本) of Ochimanjeongbeop(五針眼訂法) and was urgently needed some measures to preserve because it has been much damaged by stains, loss and oxidation due to moisture on the bottom of it. In addition, a scientific investigation was applied to find out the features of the quality of paper and fiber used for the book, which would be reflected in the process of the preservation. The characteristics of paper were measurmented for size(cm), thickness(mm), weight(g), basis weight($g/m^2$), density($g/cm^3$), chain line and laid lines($3{\times}3cm$). The measurement showed that the characteristics of paper used in royal books published in the late Joseon Dynasty. For the paper-fiber of the book, C stain was used and the technique revealed that the book is made of bast fibre of paper mulberry and its binding strings are cotton. SEM-EDS analysis was performed to verify the existence of additives in paper. As a result of the analysis, The crystallized calcium was detected in addition to the main components carbon(C) and oxygen(O). This artifact is the unique final version of "The collection of Yi Chungmugong", which has considerable value in terms of academic research, besides it helps to understand how to print books of Joseon Dynasty. And it also has a very accurate information of when and where the book was made, which primarily could be resources to conserve and restore for other book heritage.

• Korean Journal of Heritage: History & Science
• /
• v.48 no.4
• /
• pp.110-125
• /
• 2015

This study is objected to investigate the repairing method and the modification period of rafters via the transformation traces left in the superciliums, where repair process takes places frequently. This is the basic research of analyzing the architectural features of Deokkeori, one of the additional-rafter methods. Deokkeori method can be described as using Deokdori in the top section of Hayeon, and placement of Sangyeon above it. This method was started to be used since middle of the Joseon dynasty period(middle 18th Century) and mainly used at 19th Century to resist the transformation caused by repairing. It had been gradually developed from non-application stage to application stage including additional usage of complement. The architectural features of Deokkeori can be categorized into four. First, the usage of Deokdori to connect Sangyeon to the top section of Hayeon. It reduct the direct connection between Sangyoen and Hayeon, therefore give constructive benefits and prevent the downfall of the eaves by increasing the power which pressing the top section of Hayeon. Second, it gives the autonomy to the inside structure of ceiling by comprising it. By using Deokdori, the limit of top section's longitude was eliminated while also simplify the upper section by blocking the inside structures with ceiling. In addition, the complements occasionally seen in several buildings increase the power which pressing Hayeon. Third, the ceiling's slope has been changed to be concerned with Sangyeon, instead of Hayeon which was highly related with it before. The last factor is the thickness of rafters which used in Deokkeori. The diameter is thiner in Sangyeon than Hayeon.

• Journal of Korean Society of Forest Science
• /
• v.108 no.3
• /
• pp.290-295
• /
• 2019

This study was carried out to investigate the possibility of establishing a reproductive system for the seed of Pedicularis hallaisanensis, which is in the endangered wild species II class in Korea. The seed of P. hallaisanensis is egg-shaped, and the seed coat is dark brown. The embryo was identified as a dwarf type by the seed section. The seed length was $0.47{\pm}0.07mm$, width $0.16{\pm}0.006mm$, and thickness $0.12{\pm}0.01mm$. The weight of one seed was $0.0003{\pm}0.0001mg$, and 1000 seeds weighed $4.59{\pm}0.02mg$. The degree of seed viability was 75.33% by the tetrazolium (TZ) assay. The highest germination rate of P. hallaisanensis seed was 71% after 4 weeks of storage at $4^{\circ}C$. However, the germination rate tended to decrease gradually over a longer storage period. The germination rates after 6 or 8 weeks of storage at $4^{\circ}C$ were 64% and 60%, respectively. We used two host plants, Artemisia princeps and Dendranthema zawadskii, to determine the effect of host plants on P. hallaisanensis seed germination. The germination of P. hallaisanensis mixed with A. princeps or D. zawadskii started at 53.5 and 62.5 days after sowing, respectively. We did not find any germination 164 days postsowing with both host plants. When A. princeps and D. zawadskii were used as host plants for P. hallaisanensis seed germination, P. hallaisanensis seed germination rates were 45.5% and 19.5%, respectively. The average time to germination was 70.2 days for A. princeps, and 46.8 days for D. zawadskii.

• The Journal of the Petrological Society of Korea
• /
• v.28 no.3
• /
• pp.157-169
• /
• 2019

Pseudotachylytes, produced by frictional heating during seismic slip, provide information that is critical to understanding the physics of earthquakes. We report the results of occurrence, structural characteristics, scanning electron microscopic observation and geochemical analysis of pseudotachylytes, which is presumed to have formed after the Late Cretaceous in outcrops of the Paleoproterozoic granitic gneiss on the Bulil waterfall of the Jirisan area, Yeongnam massif, Korea. Fault rocks, which are the products of brittle deformation under the same shear stress regime in the study area, are classified as pseudotachylyte and foliated cataclasite. The occurrences of pseudotachylyte identified on the basis of thickness and morphology are fault vein-type and injection vein-type pseudotachylyte. A number of fault vein-type pseudotachylytes occur as thin (as thick as 2 cm) layers generated on the fault plane, and are cutting general foliation and sheared foliation developed in granitic gneiss. Smaller injection vein-type pseudotachylytes are found along the fault vein-type pseudotachylytes, and appear in a variety of shapes based on field occurrence and vein geometry. At a first glance fault vein-type seudotachylyte looks like a mafic vein, but it has a chemical composition almost identical to the wall rock of granitic gneiss. Also, it has many subrounded clasts which consist predominantly of quartz, feldspar, biotite and secondary minerals including clay minerals, calcite and glassy materials. Embayed clasts, phenocryst with reaction rim, oxide droplets, amygdules, and flow structures are also observed. All of these evidences indicate the pseudotachylyte formed due to frictional melting of the wall rock minerals during fault slip related to strong seismic faulting events in the shallow depth of low temperature-low pressure. Further studies will be conducted to determine the age and mechanical aspect of the pseudotachylyte formation.

• Korean Journal of Heritage: History & Science
• /
• v.39
• /
• pp.243-280
• /
• 2006

At the Bujang-ri Site, Seosan, South Chungcheong Province, around 220 archaeological features, including semi-subterranean houses and pits of Bronze Age and semi-subterranean houses, pits, and burials of Baekje period had been identified and investigated. In Particular, mound burials No. 5 of 13 of Baekje mound burials yielding a gilt-bronze cap along with other valuable artifacts drew international scholarly attention. The gilt-bronze cap from the mound burial No. 5 is a significant archaeological data not only in the study of Baekje archaeology but also in the study of international affairs and exchange at that time. At the time of exposure, the gilt-bronze cap was already broken into a number of pieces and seriously damaged by corrosion, and hardening and urethane foam were necessary in the process of collecting its pieces. Ahead of main conservational treatments on cap, X-ray photograph and CT(computerizes tomography) were taken in order to examine interior structure of the cap and to decide appropriate treatments. In the five layers identified in the profile of cap, a textile layer was set between a metal and a layerof bark of paper birch for avoiding direct contact of the metal and the bark of paper birch. Analyses were executed for examining textile layer and a layer of fibroid material. According to microscopic analysis, while the textile layer consisted of the simplest plain fabric with one fold among three kinds of textile structures, the layer of fibroid material was mixed with two or three kinds of fibers. A comparative analysis with standard sample using FT-IR (Fourier Transform Infrared Spectroscopy) announced that both textiles and fabrics were hemp. Analysis of kind of the paper birch resulted in barks of paper birch with 15 fold. A metallographic microscope, SEM, and WDS were used for the analysis of microscopic structures of plated metal pieces. While amalgam plating was treated as a plating method, the thickness of the plated layer, a barometer of plating technique, was ranged from $1.72{\mu}m$ to $8.67{\mu}m$. The degree of purity of gold (Au) used in plating was 98% in average, and less than 1% of silver (Ag) was included.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.428-434
• /
• 2019

Many countries have interested animal welfare. Similarly, domestic people have concern for the welfare from companion animals to livestock. Environmental enrichments (EE) are tool to enforce the welfare, however, research with sows is limited. Therefore, this study was investigate to effects of environmental enrichments on performance and behavior properties of gestating sows. A total of 30 pregnant sows (Landrace) were assigned into three treatments that control, T1 (plastic device) and T2 (Rice straw). Period of trial was from Mar. 03. 18. to Mary 19. 18. The EE were allotted to center of experimental pen ($11.6{\times}6.0m$). Body weight (BW), backfat thickness (BF) and cortisol were identified at experimental initial or end date. Behavior was recorded during 24 hours on days 91 of gestation, and then analyzed the patterns. BF was reduced (15.73 vs. 16.56 mm; p>0.05) in T1 than control, but Ending BW, total litter size and alive piglets did not differ. Born dead piglets showed lower tendency (1.00 and 0.63 vs. 1.50 heads; p>0.05) in T1 and T2 than control. Similarly, the enrichments declined farrowing mortality (C, 8.68%; T1, 6.86%; T2, 3.40%; p>0.05). Cortisol was not differed among treatments. In the behavior characteristics, eating showed lower (1.81 vs. 9.68 and 6.99%; p<0.05) in T2 than control and T1. Furthermore, playing or digging were only observed (0.33 and 2.10%; p<0.05) in T1 and T2, respectively, whereas rubbing (0.91%, p<0.05) only showed in the control. These results suggest that the provision of EE would be not negatively affected the performance of the gestating sows and could be led to improvement of the livestock welfare.

• Korean Journal of Plant Resources
• /
• v.32 no.2
• /
• pp.160-169
• /
• 2019

The this study was carried out to investigate the growth characteristics of wild-simulated ginseng by direct seeding and transplanting cultivation for develop standard cultivation techniques of wild-simulated ginseng. Bonghwa experimental field were confirm to be suitable location environment for cultivation of wild-simulated ginseng. As a result of this study, the germination rate of wild-simulated ginseng was significantly highest when seed size was over 6.5 mm in the spot seeding cultivation. In the case of transplanting, survival rate was significantly increased when the diameter of root was over 10 mm, planting distance was 7 cm, and the thickness of soil covering was less then 2 cm. The result of growth characteristics of wild-simulated ginseng by cultivation type, growth of stem in spot seeding cultivation was showed significantly increased when seed size over 6 mm, seeding number was 3 grains, and the seeding distance was less then 5 cm. Strip seeding cultivation was showed significantly increased in stem and root growth when seeding distance was 30 cm grains and quantity of seeding was less then 23 g. In the case of transplanting cultivation, it's was showed significantly increased in stem growth when diameter of root was over then 10 mm and direction of rhizome was top and bottom. The results of this study was that to clearly establish the techniques of cultivation of managements and it's will be suggest contribute to the industrial activation of wild-simulated ginseng.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.2
• /
• pp.110-117
• /
• 2019

Purpose: This study was to evaluate the wear resistance of 3D printed, milled, and conventionally cured provisional resin materials. Materials and methods: Four types of resin materials made with different methods were examined: Stereolithography apparatus (SLA) 3D printed resin (S3P), digital light processing (DLP) 3D printed resin (D3P), milled resin (MIL), conventionally self-cured resin (CON). In the 3D printed resin specimens, the build orientation and layer thickness were set to $0^{\circ}$ and $100{\mu}m$, respectively. The specimens were tested in a 2-axis chewing simulator with the steatite as the antagonist under thermocycling condition (5 kg, 30,000 cycles, 0.8 Hz, $5^{\circ}C/55^{\circ}C$). Wear losses of the specimens were calculated using CAD software and scanning electron microscope (SEM) was used to investigate wear surface of the specimens. Statistical significance was determined using One-way ANOVA and Dunnett T3 analysis (${\alpha}=.05$). Results: Wear losses of the S3P, D3P, and MIL groups significantly smaller than those of the CON group (P < .05). There was no significant difference among S3P, D3P, and MIL group (P > .05). In the SEM observations, in the S3P and D3P groups, vertical cracks were observed in the sliding direction of the antagonist. In the MIL group, there was an overall uniform wear surface, whereas in the CON group, a distinct wear track and numerous bubbles were observed. Conclusion: Within the limits of this study, provisional resin materials made with 3D printing show adequate wear resistance for applications in dentistry.