• 대한기계학회논문집A
• /
• 제25권11호
• /
• pp.1785-1795
• /
• 2001

A multi-layered brick element fur the finite element method is developed for analyzing the three-dim-ensionally layered composite structures subjected to both thermal and mechanical boundary conditions. The element has eight nodes with one degree of freedom for the temperature and three for the display-ements at each node, and can contain arbitrary number of layers with different material properties with-in the element; the conventional element should contain one material within an element. Thus the total number of nodes and elements, which are needed to analyze the multi-layered composite structures, can be tremendously reduced. In solving the global equation, a partitioning technique is used to obtain the temperature and the displacements which are caused by both the mechanical boundary conditions and temperature distributions. The results by using the developed element are compared wish the commercial package, ANSYS and the conventional finite element methods, and they are in good agreement. It is also shown that the Number of nodes and elements can be tremendously reduced using the element without losing the numerical accuracies.

• 한국전산구조공학회논문집
• /
• 제29권4호
• /
• pp.369-376
• /
• 2016

이 연구는 화재에 노출된 구조물의 역학적 거동을 평가하기 위한 기반연구로서 화재 유동해석과 열응력해석의 통합 프레임워크를 확립하고 이를 강재와 콘크리트로 이루어진 대표체적에 적용한 결과를 제시하였다. 먼저 Fire Dynamics Simulator(FDS)를 이용해 임의의 화재곡선으로 모델링되는 화원으로부터 구조물 표면까지 유동해석을 실시하였다. 이를 통해 구조물 표면에서 시간에 따른 온도 분포를 계산하였고, 이 결과를 비선형 열응력해석에 경계조건으로 적용하였다. 이후의 과정은 화재의 성장 또는 감소에 따라 구조물 표면온도의 변화를 반영하는 열전달해석과 구조해석으로 이루어진다. 제시한 통합 프레임워크에 의해 화재 구조해석을 수행한 결과, 강재와 콘크리트의 대표체적 모두 동일한 하중이 작용할 때 상온 조건에서는 탄성 거동을 보였지만 화재로 인한 온도 조건을 고려할 경우 소성 거동을 보였다. 이는 구조물이 화재에 노출되는 경우 설계하중보다 작은 하중에서도 한계상태에 이를 수 있다는 것을 의미하며, 따라서 원전구조물이나 교량과 같은 중요 사회기반구조물의 설계 시 구조물의 화재거동 평가가 고려되어야 한다고 할 수 있다.

• Coupled systems mechanics
• /
• 제6권3호
• /
• pp.251-272
• /
• 2017

In this paper, the thermo-mechanical vibration characteristics of functionally graded (FG) nanobeams subjected to three types of thermal loading including uniform, linear and non-linear temperature change are investigated in the framework of third-order shear deformation beam theory which captures both the microstructural and shear deformation effects without the need for any shear correction factors. Material properties of FG nanobeam are assumed to be temperature-dependent and vary gradually along the thickness according to the power-law form. Hence, applying a third-order shear deformation beam theory (TSDBT) with more rigorous kinetics of displacements to anticipate the behaviors of FG nanobeams is more appropriate than using other theories. The small scale effect is taken into consideration based on nonlocal elasticity theory of Eringen. The nonlocal equations of motion are derived through Hamilton's principle and they are solved applying analytical solution. The obtained results are compared with those predicted by the nonlocal Euler-Bernoulli beam theory and nonlocal Timoshenko beam theory and it is revealed that the proposed modeling can accurately predict the vibration responses of FG nanobeams. The obtained results are presented for the thermo-mechanical vibration analysis of the FG nanobeams such as the effects of material graduation, nonlocal parameter, mode number, slenderness ratio and thermal loading in detail. The present study is associated to aerospace, mechanical and nuclear engineering structures which are under thermal loads.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.217-224
• /
• 2005

A higher order zig-zag shell theory is developed to refine the predictions of the mechanical and thermal behaviors partially coupled. The in-plane displacement fields are constructed by superimposing linear zig-zag field to the smooth globally cubic varying field through the thickness. Smooth parabolic distribution through the thickness is assumed in the out-of-plane displacement in order to consider transverse normal deformation and stress. The layer-dependent degrees of freedom of displacement fields are expressed in terms of reference primary degrees of freedom by applying interface continuity conditions as well as bounding surface conditions of transverse shear stresses. Thus the proposed theory has only seven primary unknowns and they do not depend upon the number of layers. In the description of geometry and deformation of shell surface, all rigorous exact expressions are used. Through the numerical examples of partially coupled analysis, the accuracy and efficiency of the present theory are demonstrated. The present theory is suitable in the predictions of deformation and stresses of thick composite shell under mechanical and thermal loads combined.

• 동력기계공학회지
• /
• 제13권5호
• /
• pp.52-58
• /
• 2009

A gas turbine consists of an upstream compressor and a downstream turbine with a combustion chamber, and also the compressor and the turbine are generally coupled using a single shaft. Many casing bolts are used to assemble two horizontally separated casings, the gas turbine casing and the compressor casing, in both of axial and vertical directions. Because drilled holes for casing bolts in vertical direction are often too close to drilled holes for casing bolts in axial direction, one can observe cracks in the area frequently during operations of a gas turbine. In this study of the root cause analysis for the cracking initiating from the drilled holes of the casings of a gas turbine, the finite element analysis(FEA) was applied to evaluate the thermal and mechanical characteristics of the casings. By applying the field operation data recorded from combined cycle power plants for FEA, thermal and thermo-mechanical characteristics of a gas turbine are analyzed. The crack is initiated at the geometrical weak point, but it is found that the maximum stress is relieved when the same type of cracks is introduced on purpose during FEA. So, it is verified that the local fracture could be delayed by machining the same type of defects near the hole for casing flange bolts of the gas turbine, where the crack is initiated.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.181-184
• /
• 2009

The hot press farming process, which is the press hardening of steel parts using cold dies, can utilize both ease of shaping and high strength due to the hardening effect of rapid quenching during the pressing. In this study, a thermo-elastoplastic analysis of the hot press forming process using the finite element method was performed in order to investigate the deformation behavior and temperature history during the process and the mechanical properties of the pressed parts.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1992년도 춘계학술대회 논문집 92
• /
• pp.177-200
• /
• 1992

A thermo-viscoplastic finite element program was developed to analyze the compression molding of SMC process. Deformation of the material was modelled by using the flow-rule. Heat balance during the process was coupled to the deformation. In the cure study, a kinetic model was adopted to describe the cure behavior. The numerical kinetic model was integrated with the thermo-viscoplastic numerical analysis by adding heat generation due to the chemical reaction of the workpiece in the heat transfer analysis. The integrated finite element program can simulate a whole sequential molding process including deformation, heat transfer, and chemical reaction. A practical SMC molding process with T-shaped substructure was simulated. The simulated results showed good agreements with experiments.

• 한국항공우주학회지
• /
• 제37권7호
• /
• pp.653-660
• /
• 2009

회전익기의 로터 브레이크 시스템은 제동 시 운동에너지를 마찰에 의한 열에너지로 변환시켜 로터를 정지시키거나 감속시키게 된다. 이때 발생된 마찰열은 재료의 마찰 특성 자체에 상당한 영향을 주게 되어 제동시간의 변화를 초래하거나 열탄성적 불안정성을 발생시키기도 한다. 이에 본 논문에서는 상용해석 소프트웨어 ABAQUS를 이용하여 온도에 따른 마찰계수의 변화를 고려하여 제동시간을 예측할 수 있는 열기계학적 연성해석을 수행하였으며, 이와 함께 열기계학적 거동을 고려하여 간략한 이론식을 제시하고, 이를 통해 마찰계수가 온도에 따라 변할 경우 로터 브레이크 시스템의 제동시간을 예측하고 제안된 이론식의 타당성을 고찰하였다.

• 터널과지하공간
• /
• 제32권6호
• /
• pp.518-529
• /
• 2022

DECOVALEX-2023 Task C에서는 6개국 9개 참여 기관들이 스위스 Mont Terri 지하처분연구시설에 서 수행된 FE 실험을 대상으로 열-수리-역학 복합거동 모사를 위한 해석코드 개발을 수행하고 있다. 현재 현장시험 결과와 비교 분석을 위한 Step 1이 진행되고 있으며, 본 연구진은 OGS-FLAC 해석 시뮬레이터를 활용하여 일련의 해석을 진행하였다. 해석 결과 히터 가열에 따른 온도 상승이 잘 구현되었고, 상 변화에 따른 완충재 내 포화도 변화를 관측할 수 있었다. 반면 완충재 흡입력의 과대평가로 완충재 내 상대습도, 온도 변화 및 Opalinus 점토암 내 압력 변화가 현장 결과와 다소간 차이를 나타내는 것을 확인하였다. 이를 통해 완충재 흡입력이 처분시스템 해석 시 유동 해석 결과에 지배적인 영향을 미침을 확인할수 있었으며, 향후 지보재 및 초기 수압 모사 개선을 통해 향상된 결과를 도출하고자 한다. 또한, Opalinus 점토암의 열, 수리, 역학적 이방성이 잘 구현되었으며 해석 결과를 통해 OGS-FLAC 시뮬레이터의 처분시스템 해석 적용성을 확인하였다.

• 대한기계학회논문집A
• /
• 제24권8호
• /
• pp.1968-1799
• /
• 2000

A warpage analysis program has been developed for fiber-reinforced injection molded parts. The warpage is predicted from the residual stress and anisotropic thermo-mechanical properties coupled with fiber orientation in the integrated injection molding simulation. A simple elastic model is used for the calculation of thermally and pressure-induced residual stresses which are employed as the initial conditions in the structural analysis. To improve the reliability of warpage analysis, a new triangular flat shell element superimposing well-known efficient plate bending and membrane element is presented. The numerical examples address the necessity to use anisotropic models for fiber-reinforced materials and show that predicted warpage is in good agreement with experimentally measured one.