• Corrosion Science and Technology
• /
• v.12 no.5
• /
• pp.253-258
• /
• 2013

Effects of copper hydroxide(II) on the curing and the corrosion resistance of electrocoating were investigated by MEK rubbing test, electrochemical impedance spectroscopy (EIS) and Thermo-gravimetric analysis (TGA). Curing performance of electrocoating was lowered with increasing the content of copper hydroxide(II) as evidenced by the MEK rub performance which decreased with increasing the content of copper hydroxide(II). This indicates copper hydroxide(II) affected the blocked isocyanate reaction in the coatings, by the decomposition of copper hydroxide(II) to CuO and $H_2O$ during reaction of isocyanate with nuclephiles. Corrosion resistance of coatings also decreased with the content of copper hydroxide. This reflects the higher barrier property in coatings with higher curing performance.

• Journal of the Korean Ceramic Society
• /
• v.55 no.6
• /
• pp.625-634
• /
• 2018

In this work, we describe a novel and simple technique to produce non-hydrate surfactant complexes for the formation of highly crystalline fatty acid modified SPIONs by thermolysis of iron oleate (FeOl) complexes in a non-coordinating solvent. FeOl complexes were prepared by direct coordination of iron ions and carboxylic acid; thus, we could control the stoichiometric composition of the precursor by changing the molar ratio of fatty acid and metal ions. The discrete thermal behaviors and chemical coordination of the intermediate non-hydrated FeOl were studied by thermo-analytic techniques including differential scanning calorimetry, thermal gravimetric analysis, and Fourier transform infrared spectroscopy.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.6
• /
• pp.2100-2108
• /
• 1991

A hear transfer model was developed to calculate the temperature distribution in the rotary kiln incinerator of municipal solid waste. The thermo-gravimetric characteristics of waste and the gas-to-waste heat transfer coefficient were determined by comparing the experimental results and model prediction. With this, heat transfer rates by existing heat transfer mechanisms were calculated to be compared each other. The effects of treatment capacity, calorific value of waste, and flow rate and temperature of combustion air on the temperature distribution in the rotary kiln incinerator were predicted by the model developed in this work.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.239-239
• /
• 2003

탄소재료의 산화반응을 설명한 대부분의 논문은 TGA(Thermo Gravimetric Analysis)를 이용한 연구이다. TGA 장치는 가열이 필요한 물질의 반응연구에 다양하게 이용되고 있는데, 온도에 대한 무게 변화를 간편하게 알 수 있다는 장점과 함께 보편적으로 편리한 Arrhenius형태의 속도식으로 해석된다. 많은 연구자들은 TGA를 이용하여 다양한 탄소재료에 대한 반응속도상수를 구하였으며, 반응기체, 반응온도 및 원료물질에 따라 다른 속도를 나타내는 실험결과를 표준화된 속도식으로 표현하고자 하는 노력이 있었다. 그러나 이런 대부분의 연구는 coal 등과 같은 탄소재료의 연소특성을 이용하려는 에너지 변환 연구가 주를 이루어 왔으며, 탄소섬유의 산화반응에 대한 표준화 식으로 해석한 보고는 거의 없는 실정이다. 이 연구에서는 내부구조가 현격하게 차이나는 다른 두 종류의 피치계 탄소섬유를 TGA를 이용하여 등온 산화반응 시켰다. 반응기체의 종류와 반응온도를 변화시켜 산화반응조건에 따른 중량변화를 관찰하였고, 여러 산화조건에서 얻어진 산화속도를 Kasaoka 등에 의해 제안된 표준화식을 이용하여 산화반응의 평균 속도상수 K와 전환율이 0.5일 때의 속도상수 $k_{f=0.5}$ 결과를 비교하여 산화 반응속도를 정량적으로 해석하고자 하였다.다.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1130-1131
• /
• 2015

팰릿 형태의 XLPE (Cross-Linking Polyethylene)를 Hot Press로 시험편을 제작하여 열분석 데이터 처리장치를 이용하여 시차 주사 열량법 (differential scanning calorimetry, DSC)과 열 중량 분석 (Thermo gravimetric analysis, TGA) 등으로 열적 특성을 분석하였다. 분석 결과, XLPE의 전이온도 피크는 $61^{\circ}C$, 용융온도에 해당하는 피크는 $102^{\circ}C$에서 나타났으며 XLPE의 TG 분석 결과 $470^{\circ}C$ 근처에서 한 번의 급격한 열중량 감소를 보였으며 $800^{\circ}C$까지 측정 후 잔류물은 완전 분해되어 거의 존재하지 않았음을 알 수 있었다.

• Journal of Powder Materials
• /
• v.11 no.2
• /
• pp.111-117
• /
• 2004

The oxidation behavior of 91 WC-9Co hardmetal in weight percentage has been studied in the present work as a part of the development of recycling process. The morphological and compositional changes of the WC-Co hardmetal with oxidation time at 90$0^{\circ}C$ were analyzed by using surface observation and X-ray diffraction. respective]y. As the oxidation time increased, the WC-Co hardmetal was continuously expanded to form porous oxide mixtures of $CoWO_4$ and $WO_3$. The morphology of porous oxide mixture was basically dependent on initial shape of the WC-Co hardmetal. From thermo-gravimetric (TG) analysis, it was found that the oxidation rate was increased with increasing oxidation temperature and oxygen content in the flowing atmospheric gas. The fraction of oxidation versus time curves showed S-curve relationship at a given of oxidation temperature. These oxidation behaviors of the WC-Co hardmetal were discussed in terms of previously proposed kinetic models.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.207-208
• /
• 2007

Recently, high performance microelectronic devices are designed in multi-layer structure in order to make dense wiring of metal conductors in compact size. Imprint lithography have received significant attention due to an alternative technology for photolithography on such devices. In this work, we synthesized dielectric composite materials based on epoxy resin, and investigated their thermal stabilities and dynamic mechanical properties for thermal imprint lithography. In order to enhance the mechanical properties and toughness of dielectric material, various modified polyetherimide(PEI) was applied in the resin system. Curing behaviours, thermal stabilities, and dynamic mechanical properties of the dielectric materials cured with various conditions were studied using dynamic differential scanning calorimetry (DSC), thermo gravimetric analysis (TGA), and Universal Test Method (INSTRON).

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.2_1
• /
• pp.79-89
• /
• 2021

Poly(lactic acid) (PLA) is considered as one of the most promising bio-based polymers due to its high strength, high modulus, good processability, transparency after processing, and commercial availability. This study aimed to investigate the mechanical, thermal, and migration properties of poly(lactic acid)/zeolite (10 phr) composites prepared with various biocompatible plasticizers, such as triethyl citrate(TEC), tributyl citrate(TBC), and poly(ethylene glycol)(PEG400), through differential scanning calorimetry(DSC), thermo-gravimetric analysis(TGA) and standard tensile testing. The incorporation of PEG400 significantly increased the elongation at break, and DSC results showed that the addition of plasticizers drastically decreased the T_g of PLA/zeolite composites and improved the melt flow and processability. Besides, it was found from TGA results that PLA/zeolites composites plasticized by TEC and TBC were more easily to be thermally degraded than the composites plasticized by PEG400.

• Structural Engineering and Mechanics
• /
• v.76 no.5
• /
• pp.613-618
• /
• 2020

Exhausting oil resources and increasing pollution around the world are forcing researchers to look for new, renewable, biodegradable materials to lead sustainable development. The use of fiber reinforced composites based on natural fibres has increasingly begun as prospective materials for various engineering applications in the automotive, rail, construction and aerospace industries. The natural fiber chosen to make the composite material is plant-based fibre, e.g. jute fibre, and hemp fibre. Thermosetting polymer based Epoxy (LY556) was utilized as matrix material and The composites were produced using hand lay-up technique. The fabricated composites were tested for acoustic testing, thermo-gravimetric analysis (TGA) and flammability testing to asses sound absorption, thermal decomposition and fire resistivity of the structures. Hemp fibre composites have shown improved thermal stability over Jute fibre composites. However, the fire resistance characteristics of jute fibre composites are better as compared to hemp fibre composites. The sound absorption coefficient of composites was found to enhance with the increase of frequency.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.12 no.1
• /
• pp.8-16
• /
• 2024

Limestone (CaCO₃, calcium carbonate), which is used as a raw material in the portland cement and steel industry, emits CO₂ through decarbonation by high temperatures in the manufacturing process. To reduce CO₂ emissions by the use of raw materials like limestone, it has been proposed to replace limestone with various industrial by-products that contain CaO but less or none of the carbonated minerals, that cause CO₂ emissions. Loss of Ignition (LOI), Thermogravimetric analysis (TG), and Infrared Spectroscopy (IR) are used to quantitative the amount of CO₂ emission by using these industrial by-products, but CO₂ emissions can be either over or underestimated depending on the characteristics of by-product materials. In this study, we estimated CO₂ contents by LOI, TG, IR and DTG(Differential Thermogravimetric analysis) of calcite(CaCO₃) and samples that contain CO₂ in the form of carbonate and whose weight increases by oxidation at high temperatures. The test results showed for CaCO₃ samples, all test methods have a sufficient level of reliability. On the other hand, for the CO₂ content of the sample whose weight increases at high temperature, LOI and TG did not properly estimate the CO₂ content of the sample, and IR tended to overestimate compared to the predicted value, but the estimated result by DTG was close to the predicted valu e. From these resu lts, in the case of samples that contain less than a few percent of CO₂ and whose weight increases during the temperature that carbonate minerals decompose, estimating the CO₂ content using DTG is a more reasonable way than LOI, TG, and IR.