• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.1162-1164
• /
• 1993

The Thermally Stimulated Current(TSC) spectroscopy has been applied to study the influence of the structual cahange and interface on the electrical properties of epoxy composites. Three DGEBA-MeTHPA matrix model samples mixed different ratios and silica($SiO_2$) filled sample and silaln treating-filled sample has been studied. Above room temperature, the relaxation mode $\alpha$ peak associated with Tg has been located at $110^{\circ}C$. Below glass transition temperature(Tg), three relaxation modes are observed in all samples: a $\beta$ mode situated at $10^{\circ}C$, a $\gamma$ mode located at $-40^{\circ}C$ and a $\delta$ mode appeared in $-120^{\circ}C$. The analysis of its fine structure indicates that constitution of elementary processes is characterized by the activation energy and relaxation time. Also the dielectric relaxation properties have been investigated to compare the the change of the molecular structure and motion to the relaxation properties and conduction mechanism in TSC spectra.

• 한국전기전자재료학회논문지
• /
• 제11권6호
• /
• pp.442-446
• /
• 1998

$\alpha$--sulfur single crystal which has orthorohmbic structure was grown using Bridgman method. The indirect optical energy band gap of this crystal are 2.65 and 2.82 eV at 10 and 300K, respectively. The wavelengths of photoluminecence(PL) peaks are 543 and 596 nm at 10k, By thermally stimulated current (TSC) method, two electron traps($D_1,D_2$) located at 0/23 and 0.43eV below the conduction band and a hole trap(A) located at 0.31 eV above the valence band are observed. PL mechanism of $\alpha$-sulfur single crystal is analyzed using the values of optical energy band gap at 10k two electron traps and a hole trap.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1989년도 춘계학술대회 논문집
• /
• pp.101-104
• /
• 1989

Thermal Electet of the Zinc Oxide varistor has been studied in the temperature range of -130~200[$^{\circ}C$] and the electric field of 6[kV/m]. It appears that there are four peaks of thermally stimulated current; $\alpha$, $\beta$, ${\gamma}$ and $\delta$ spectra appearing at the temperature range of 160, 130, 20 and -30[$^{\circ}C$], respectively. It seems that the origin of $\alpha$, $\beta$, ${\gamma}$ and $\delta$ peaks are associated with the depolarization of donor ions in the depletion layer, the detrapping of trapped electron in the surface, the detrapping of trapped electron in the donor level and the detrapping of trapped electron between grain and intergranular, respectively.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2011년도 제43차 동계학술발표논문집 19권1호
• /
• pp.185-188
• /
• 2011

In order to estimate spatial charging process in the corona charging which has been used to make polymer electret, the electrical properties of polypropylene film were obtained from Thermally Stimulated Current(TSC) measurements after corona charging between knife electrode and cylinder electrode with the voltages of -5, -6, -7 and -8[kV], respectively. And then the electrostatic contour and the electric field vector were also simulated by using Finite Element Method(FEM). The edge effect around edge of knife electrode affected the electrostatic contour on surface of specimen and the electric field concentration inside specimen. The uneven charging state in the electret due to the mistake on design could be calculated and so the optimal design of corona charging device which is appropriate to various materials is come to be practicable.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 제5회 학술대회 논문집 일렉트렛트 및 응용기술연구회
• /
• pp.96-99
• /
• 2003

In this paper, it presents a method to calculate the escape frequency factor$(\nu)$ and its verification from TSC(Thermally Stimulated Current) equation and their simulation curves. To apply calculation method of $\nu$ using asymptotic estimation, it utilized TSC data with 1K interval. This method enables one to get the exact value of $\nu$ and activation energy at the same time by using computer programming. So, it regards their calculation method as a useful process to obtain the value of physical behavior.

• E2M - 전기 전자와 첨단 소재
• /
• 제6권2호
• /
• pp.161-167
• /
• 1993

ZnO 바리스터의 비선형 전도특성은 입자의 구조로부터 설명할 수 있다. 본 논문에서는 ZnO 바리스터의 입자구조에 트랩된 캐리어를 분석하기 위해서 TSC 측정 기법을 사용하였다. 측정 결과로 부터 네개의 TSC피크를 얻었다. 고온으로 부터 첫번째 두번째와 세번째 TSC피크의 기원은 각각 트랩, 도너 밀도 및 입계층의 트랩으로 나타나고 네번째 피크의 기원은 공핍층에 있는 도너 이온의 탈분극에 의해서 기인하는 것으로 사료된다. .alpha.$_{1}$피크의 활성화 에너지는 약 0.33-1.42eV였다. 또한 바리스터의 예비동작 영역에서의 전도특성은 .alpha.$_{1}$과 .alpha.$_{2}$피크의 값에 지배된다는 것을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.401-403
• /
• 1995

The degradation phenomena according to electrical stress in epoxy composites were studied. The formation of electrets were observed by appling high voltages, 22.9[kW/cm], during 5[hr] to five kinds of specimens for a given mixing rate, and then TSC(thermally stimulated current) values were measured at the temperature range of $-160\sim200[^{\circ}C]$.

• 대한전기학회논문지
• /
• 제34권4호
• /
• pp.144-152
• /
• 1985

This paper temperature gradient thermally stimulated surface potentian (TG-TSSP) in measurements are applied to the study of the polarity of trapped and ionic carriers in cross-linked polyethylene (XLPE) filsm. In the thermally stimulated current in uniform temperature (TSC) of XLPE five peaks appear as indicated of the A B C D and E. In this paper A (at about -120$^{\circ}C$) D (at about 70$^{\circ}C$) and E (at about 110$^{\circ}C$) peaks are investigated. A peak is due to the biassing voltage and biassing temperature. Appear in to the glass transition temperature territory and caused in to the polarization of dipole. D peak is due to the depolarization of ionic space charge and E peak due to the detrapping of carriers injected from the electrodes. TG-TSSP and TSSP are measured to study the polarity of ionic carrier (D peak). In the unsatureated region of ionic space charge polarization, TG-TSSP is lower than TSSP during the initial stage of heating. Result of the experiment for E peak, TG-TSSP is higher than TSSP during the initial stage of heating and these results do not depend on the polarity of biassing voltage, and E peak is concerned with positive carriers (Holes).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 제2회 학술대회 논문집 일렉트렛트 및 응용기술전문연구회
• /
• pp.15-20
• /
• 2000

In this paper. Thermally Stimulated Current spectra have been measured in the Polypy - romellitimide (polyimide). As a result of the investigation. three peaks have been observed: $A(50^{\circ}C)$, $B(120^{\circ}C)$, $C(200^{\circ}C)$. Among three peaks, C peak has been observed in detail. The C peak is shown to be created due to the polarization of ionic space charge from the experimental results which were measured as a function of forming time, forming temperature. forming voltage and collecting voltage. As a result, we have measured the TSC in ion ($Na^+$) implanted - Polyimide, also found the peak at $215^{\circ}C$. Therefore, TSC characteristics in the C peak is probably caused by residual impurity. And The activation energy caculated by means of initial rising method 1.8eV, hopping distance. $90{\AA}$. and the mobility. $2.88{\times}10^{-11}cm^2/v.s$

• E2M - 전기 전자와 첨단 소재
• /
• 제10권2호
• /
• pp.97-104
• /
• 1997

In this paper, in order to investigate the behavior of charged particles on (Sr.Ca)TiO$_{3}$ ceramics with paraelectric properties, the characteristics of electrical conduction and thermally stimulated current was measured respectively. As a result, the conduction mechanism is divided into three regions having different mechanism as the current increased. The region I below 200[V/Cm] shows the ohmic conduction. The region B between 200[V/cm] and 2000[V/cm] can be explained by the Poole-Frenkel emission theory, and the region III above 2000[V/cm] is dominated by the tunneling effect. The three peaks of TSC were obtained at the temperature of -20[.deg. C], 20[.deg. C] and 80[.deg. C], respectively. The origins of these peaks are that the .alpha. peak observed at -20[.deg. C] looks like to be ascribed to the ionization excitation from donor level in the grain, and the .alpha.' peak observed at 20 [.deg. C] appears to show up by hopping conduction of the trapped carrier of border between the oxidation layer and the grain, and the .betha. peak observed at 80[.deg. C] seems to be resulted from hopping conduction of existing carrier in the trap site of the border between the oxidation and second phase.