• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.11
• /
• pp.1092-1100
• /
• 2004

This paper presents the effect of opening configuration on the thermal behavior and air pattern of earth tube system. The earth tube system is a fresh air load reduction system by using underground double floor space for air-conditioning. In order to analyze the effect of opening configuration on thermal performance of this system and air pattern in underground double floor space quantitatively, we used a model dealing with tree-dimensional profile of wind velocity and temperature in underground double floor space. In conclusion, it is confirmed that heat exchange of a fresh air is mainly performed with upper and lower wall in underground double floor space, and that heat exchange area increased by installing the opening near the wall.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.11
• /
• pp.1-8
• /
• 2003

In this paper, the dependence of silicide properties such as sheet resistance and cross-sectional profile on the dopants for source/drain and gate has been characterized. There was little difference of sheet resistance among the dopants such as As, P, BF$_2$ and B$_{11}$ just a(ter formation of NiSi using RTP (Rapid Thermal Process). However, the silicide properties showed strong dependence on the dopants when thermal treatment was applied after silicidation. BF$_2$ implanted silicon showed the most stable property, while As implanted one showed the worst. The main reason of the excellent property of BF$_2$ sample is believed to be tile retardation of hi diffusion by the flourine. Therefore, retardation of Ni diffusion is highly desirable for high performance Ni-silicide technology.y.

• Korean Journal of Optics and Photonics
• /
• v.12 no.6
• /
• pp.446-451
• /
• 2001

We made a laser induced grating spectrometer(LIGS) and measured the thermal grating signal generated in a $C_3$ $H_{8}$ flame. The thermal grating was formed in the C7Ha flame with two second-harmonic Nd:YAG pulse laser beams, and an LIGS signal was generated by Bragg scattering of a probe laser beam A $r^+.laser(488 nm). We found the modulation period of the signal depends linearly on the spacing of the grating set in the flame. We determined flame temperature by fitting the modulated signal and soot concentration with signal strength. Using this technique, we also obtained temperature profile and soot-particle distribution in a $C_3$ $H_{8}$ flame .e .

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.3
• /
• pp.225-230
• /
• 2006

The overall performance and local flow fields of the fan, heat sink, and fan-sink were experimentally and numerically studied to investigate the flow characteristics of a fan-sink. The flow resistance of the heat sink was measured by small fan tester based on AMCA standards and compared with the CFD results to select available cooling fan for the fan-sink. The nonuniform velocity profile behind the fan outlet was shown by the flow visualization. The effects of nonuniform velocities on the performance of heat sink were discussed. To validate the commercial CFD code CFX-5.6, the predicted performance curve was compared with that of fan testing. The local flow fields of the fan-sink were analyzed by CFD results. MFR (multiple frame of reference) was used as a computational model combining rotating fan and stationary heat sink. Through the CFD results of the fan-sink, the flow patterns behind the fan outlet influenced the flow resistance and overall performance of the heat sink.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.655-655
• /
• 2002

Spatial distribution of phytoplankton pigment concentration (PPC) and sea surface temperature (SST) around the East Korean Warm Current (EKWC) was described, using both ocean color images and advanced very high resolution radiometer (AVHRR) images. Water mass in this region can be classified into five categories in the horizontal profile of PPC and SST, nLw(normalized water-leaving radiance) images: (1) coastal cold water region associated with concentrations of dissolved organic material or yellow colored substances and suspended sediments, (2) cold water region of thermal frontal occurred by a combination of phytoplankton absorption and suspended materials, (3) warm water overlay region by the phytoplankton absorption than the suspended materials; (4) warm water region occurred by the low phytoplankton absorption, and (5) offshore region occurred by the high phytoplankton absorption. In particular, the highest PPC area appeared in the ocean color and SST images with a band shaped distribution of the thermal front and ocean color front region, which is located the coastal cold waters along western thermal front of the warm streamer of the EKWC.

• Solar Energy
• /
• v.20 no.1
• /
• pp.81-89
• /
• 2000

In the present study, the characteristics of conductive and convective heat transfer occurred in a circular absorber of PTC (parabolic trough concentrator) for medium temperature solar energy utility were numerically investigated. A circular tube was considered as an absorber and the shape of PTC modeled in this study was based on the system that was installed in Korea Institute of Energy Research. Not only convection inside the tube but also conduction through the wall of the tube were analyzed, simultaneously. Circumferentially non-uniform heat flux that was simulated from the non-uniform solar disc model proposed by Jose was applied as thermal boundary condition on the tube surface. And, hydrodynamically fully developed laminar velocity profile was used as the inlet boundary condition and it was assumed that the working fluid was water. And, local heat fluxes at the interface of the tube and the working fluid were calculated for different wall thickness and thermal conductivity of the tube at various Reynolds number. Based on the results, the effects of thermal conduction of the tube on the local heat transfer were investigated.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.4
• /
• pp.48-56
• /
• 2011

Black cobalt solar selective coatings were prepared by thermal oxidation of electroplated cobalt metal on copper and nickel substrates. The optical properties and structure of the black cobalt selective coating for solar energy utilizations were characterized by glow discharge spectrometry (GDS), ultraviolet-visible-near infrared (UV-VIS-NIR) spectrometer, atom force microscopy(AFM) and X-ray photoelectron spectroscopy(XPS). The optical properties of optimum black cobalt selective coating prepared on copper substrate were a solar absorptance of 0.82 and a thermal emittance of 0.01. From the GDS depth profile analysis of these coatings, the concentration of cobalt particles near the interface was higher than at the surface, but oxygen concentration at the surface was higher than at the interface. These results suggest that the selective absorption was dominated by this chemical composition variation in the coating. The surface of this film exhibited morphology with root-mean-square(rms) roughness of about 144.3nm. XPS measurements data showed that several phases of Co coexist($Co_3O_4$,CoO) in the film.

• Steel and Composite Structures
• /
• v.41 no.6
• /
• pp.787-803
• /
• 2021

The size-dependent nonlinear thermomechanical vibration analysis of pre- and post-buckled tapered two-directional functionally graded (2D-FG) microbeams is presented in this study. In the context of the modified couple stress theory, the formulations are derived based on the parabolic shear deformation beam theory and von Karman nonlinear strains. Different thermomechanical material properties are assumed to be temperature-dependent and smoothly vary in both length and thickness directions using the power law and the physical neutral axis concept is employed. The nonlinear governing equations are derived using the Hamilton principle and the resulting variable coefficient equations of motion are solved using the differential quadrature method (DQM) and iterative Newton's method for clamped-clamped and simply supported boundary conditions. Comparison studies are presented to validate the derived model and solution procedure. The impacts of induced thermal moments, temperature power index, two gradient indices, nonuniform cross-section, and microstructure length scale parameter on the frequency-temperature configurations are explored for both clamped and simply supported microbeams.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.24 no.2
• /
• pp.69-74
• /
• 2012

Tropical tasar silkworm Antheraea mylitta Drury experiences extreme temperature stress conditions during its life cycle particularly during diapauses and first crop. The present study witnessed the impact of high temperature on some biochemical profiles and egg production (fecundity) of semi-domesticated Daba and Shorea robusta (Sal) based wild ecorace Laria during seed cocoon (pupa) preservation. Cocoons of Daba and Laria were treated with high temperature at $40^{\circ}C$ for 10 days in a BOD incubator. The protein profile and carbohydrate content in the hemolymph and fat body and total haemocyte count (THC) in the hemolymph of pupa were investigated. Further, the fecundity and fertility of egg was assessed. Significant increase in the protein concentration was observed in the hemolymph with reduction in the fat body (p<0.05). The difference in protein concentration was highly significant between the semidomesticated Daba and wild ecorace Laria (p<0.05). High pupal mortality (20%) and reduced fecundity (10-15%) in Daba was noticed compared to wild Laria. Also an increased THC (>28000) was recorded in Laria. The study infers the potentials of wild ecoraces in sustaining the extreme temperature conditions and need of adopting suitable package of practices for the preservation of diapause seed cocoons during extreme summer conditions. There is possibility to introgression thermal stress resistant traits in the semi-domesticated races of tasar silkworm by resorting to conventional breeding plans with wild races and keeping the thermal stress induced response as markers.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.5
• /
• pp.90-99
• /
• 1984

A onetimensional distribution of the temperature and the heat source in the SOI (silicon-on-insulator) multi-layer structure illuminated by tungsten lamps from both sides was obtained by solving the heat equation in steady state on a finite difference grid using successive over-relaxation method. The heat source distribution was obtained by considering such features as spectral components of the light source, multiple reflection at the internal interfaces, temperature and frequency dependence of the light absorption coefficient, etc. The front and back surface temperatures, which are boundary conditions for the heat equation, were derived from a requirement that they satisfy the radiation conditions. The radiation flux as well as the conduction flux was considered in modelling the thermal behaviour at the internal interfaces. Since the temperature and the heat source profiles are strongly dependent upon each other, the calculation of each profile was iterated using the updated profile of the other until they are consistent with each other. The experimental temperature at the front surface of the wafer as measured by Pyrometer was about 1200$^{\circ}$K, while the simulated temperature was 1120$^{\circ}$K.