• 한국세라믹학회지
• /
• 제50권1호
• /
• pp.63-69
• /
• 2013

Negative-temperature coefficient (NTC) thermistors based on nickel manganite spinel ($NiMn_2O_4$) are widely used for many applications, such as sensors and temperature compensators, due to their good thermistor characteristics and stabilities. However, to achieve thermistors with a high NTC B constant, which is an important figure of merit pertaining to the degree of temperature sensitivity, the activation energy should be high such that high resistivity at ambient temperatures results. To obtain a high B constant and low resistivity, Al and Si modified spinel structured $Ni_{0.6}Si_{0.2}Al_{0.6}Mn_{1.6}O_4$ hybrid thick films with the conducting metal oxide of $LaNiO_3$ were fabricated on a glass substrate by aerosol deposition at room temperature (RT). The NTC-$LaNiO_3$ hybrid thick films showed resistivity as low as < $100k{\Omega}\;cm$ at $90^{\circ}C$, which is one or two orders of magnitude lower than that of the monolithic NTC films, while retaining a high B constant of $NiMn_2O_4$ of over 5500 K when 20 wt% $LaNiO_3$ was added without a post-thermal treatment. These phenomena are explained by the percolation threshold mechanism.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.172-173
• /
• 2012

Currently GaN based LED is known to show high internal or external efficiency at low current range. However, this LED operation occurs at high current range and in this range, a significant performance degradation known as 'efficiency droop' occurs. Auger process, carrier leakage process, field effect due to lattice mismatch and thermal effects have been discussed as the causes of loss of efficiency, and these phenomena are major hindrance in LED performance. In order to investigate the main effects of efficiency loss and overcome such effects, it is essential to obtain relative proportion of measurements of internal quantum efficiency (IQE) and various radiative and nonradiative recombination processes. Also, it is very important to obtain radiative and non-radiative recombination times in LEDs. In this research, we measured the IQE of InGaN/GaN multiple quantum wells (MQWs) LEDs with PSS and Planar substrate using modified ABC equation, and investigated the physical mechanism behind by analyzing the emission energy, full-width half maximum (FWHM) of the emission spectra, and carrier recombination dynamic by time-resolved electroluminescence (TREL) measurement using pulse current generator. The LED layer structures were grown on a c-plane sapphire substrate and the active region consists of five 30 ${\AA}$ thick In0.15Ga0.85N QWs. The dimension of the fabricated LED chip was $800um{\times}300um$. Fig. 1. is shown external quantum efficiency (EQE) of both samples. Peak efficiency of LED with PSS is 92% and peak efficiency of LED with planar substrate is 82%. We also confirm that droop of PSS sample is slightly larger than planar substrate sample. Fig. 2 is shown that analysis of relation between IQE and decay time with increasing current using TREL method.

• 한국항공우주학회지
• /
• 제44권12호
• /
• pp.1071-1086
• /
• 2016

항공기는 결빙, 난기류, 낙뢰 등 환경적 요인에 의해 안전성을 위협받는다. 그 중 낙뢰는 항공기에 강한 전류와 전압을 유입시켜 고온의 열과 자기장을 발생시키므로 항공기 안정성에 큰 위협이 된다. 본 연구에서는 낙뢰의 발생원리 및 항공기 낙뢰 피격 메카니즘을 설명하고 항공기에 대한 낙뢰의 직접, 간접 영향성을 다룬다. 먼저 항공기 낙뢰 지침서인 ARP를 분석하여 항공기 낙뢰모사와 부착위치에 대한 분석을 진행하였으며, 이를 전산 시뮬레이션에 적용하였다. 또한 ABAQUS 소프트웨어를 활용한 열적, 전기적 시뮬레이션을 통해 연료탱크의 낙뢰 영향성 분석 및 낙뢰보호시스템 설계를 진행하였다. 그리고 Maxwell 방정식에 기초한 EMA3D 소프트웨어를 활용하여 항공기 전기체의 전류 흐름에 대한 전산수치해석을 진행하였다.

• Journal of Acupuncture Research
• /
• 제19권3호
• /
• pp.64-76
• /
• 2002

Objective : The purpose of this study is to investigate the mechanism and effect of moxibustion objectively and to be used as the quantitative data for developing the new thermal stimulating treatment by observing the combustion characteristics of commercial moxaes. Methods : We have selected two types(large-size moxa A(LMA), large-size moxa B(LMB)) among large moxaes used widely in the clinic. We examined combustion times, temperatures, temperature gradients in each period during a combustion of moxa. Results : 1. The ascending temperature gradient measured in the central point of non-contacted surface was fastest, the average ascending temperature gradient of both moxaes was $0.0384^{\circ}C/sec$, $0.0123^{\circ}C/sec$ respectively, 3.1 times faster in LMA. The maximum ascending temperature gradient was also about 2.9 times faster in LMA. The time required for the maximum ascending temperature gradient from ignition was 254sec, 411sec respectively. 2. The minimum descending temperature gradient in the retaining period was $-0.0250^{\circ}C/sec$, $-0.0090^{\circ}C/sec$ respectively and the average descending temperature gradient was $-0.0160^{\circ}C/sec$, $-0.0037^{\circ}C/sec$ respectively on the non-contact surface. 3. On the basis of the non-contact surface($A_I$), the time at which the effective stimulus period began to occur was about 264sec, 796sec respectively after an ignition, the time at which the maximum temperature began to occur was about 373sec, 1323sec respectively after an ignition, and the maximum temperature was $0.9^{\circ}C$ higher in LMA. The maximum ascending temperature gradient was also about 4.2 times faster in LMA. Conclusion : It was thought that not only the figure of moxicombustion device, but also the form and size of moxa had influence on the combustion characteristics deciding the performance of stimulus seriously.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 추계학술발표대회
• /
• pp.24.1-24.1
• /
• 2009

Tantalum carbo-nitride($T_aC_xN_y$) films were deposited with chemical vapor deposition(CVD) using tert-butylimido tris-diethylamido tantalum (TBTDET, $^tBu-N=Ta-(NEt_2)_3$, $Et=C_2H_5$, $^tBu=C(CH_3)_3$) between $350^{\circ}C$ and $600^{\circ}C$ with argon as a carrier gas. Fourier transform infrared (FT-IR)spectroscopy was used to study the thermal decomposition behavior of TBTDET in the gas phase. When the temperature was increased, C-H and C-N bonding of TBTDET disappeared and the peaks of ethylene appeared above $450^{\circ}C$ in the gas phase. The growth rate and film density of $T_aC_xN_y$ film were in the range of 0.1nm/min to 1.30nm/min and of $8.92g/cm^3$ to $10.6g/cm^3$ depending on the deposition temperature. $T_aC_xN_y$ films deposited below $400^{\circ}C$ were amorphous and became polycrystal line above $500^{\circ}C$. It was confirmed that the $T_aC_xN_y$ film was a mixture of TaC, graphite, $Ta_3N_5$, TaN, and $Ta_2O_5$ phases and the oxide phase was formed from the post deposition oxygen uptake. With the increase of the deposition temperature, the TaN phase was increased over TaC and $Ta_3N_5$ and crystallinity, work function, conductivity and density of the film were increased. Also the oxygen uptake was decreased due to the increase of the film density. With the increase of the TaC phase in $T_aC_xN_y$ film, the work function was decreased to 4.25eV and with the increase of the TaN phase in $T_aC_xN_y$ film,it was increased to 4.48eV.

• KSBB Journal
• /
• 제25권3호
• /
• pp.289-296
• /
• 2010

e-Lectin은 당 결합 단백질과 세포 응집 단백질로서, 식물방어의 역할도 하는데 방울토마토 열매의 locular fluid에는 곰팡이로부터 식물의 보호 기능을 하는 것으로 생각되는 chitin 결합 lectin이 들어 있다. 이에 본 연구에서는 방울토마토의 locular fluid로부터 최종적으로 Sephadex G-200을 통과시켜 lectin을 분리한 다음, 이의 항균성과 분자량, 적혈구 응집력, 혈액특이성, 최적 온도, 열 안정성 및 최적 pH 등의 생화학적 특성을 연구하였다. 식물성 병원균인 4개의 균주 중 Cladosporium cucumerinum과 Monosporascus cannonballus에 대해서는 항균 활성을 나타내었으나, Fusarium oxysporum과 Rhizoctonia solani에 대해서는 항균 활성을 나타내지 않았다. SDS-PAGE의 결과, 2개의 band로 나타났으며, 이의 분자량을 표준 단백질을 이용 측정하여 87 kDa와 47 kDa로 계산되었다. 사람의 A, B, O, AB형의 혈액을 사용하여 각각의 혈구응집반응을 확인한 결과, A, B, O, AB형 모두에서 응집반응이 일어났으며, 이 중 B형 혈액에서 가장 높은 활성을 나타내었다. 분리된 방울토마토 locular fluid lectin의 최적 반응 온도는 $30^{\circ}C$이며, 가장 높은 $30^{\circ}C$를 포함하는 $20-80^{\circ}C$ 범위에서 열 안정성을 보였고, 최적 pH는 7.0이다.

• 대한기계학회논문집B
• /
• 제35권3호
• /
• pp.321-330
• /
• 2011

본 연구는 전선화염의 전파특성에 직류전기장이 미치는 영향에 대한 실험적 연구이다. 화염전파는 은 0에서 ${\pm}7kV$ 범위의 음극과 양극의 전기장을 인가하여 실험되어졌다. 본 연구를 통해 앞선 전선화염 전파에 영향을 미치는 교류전기장 효과에 관한 연구결과와 비교하여 관찰된 다양한 화염 모양 변화의 원인을 알아보고, 화염 전파 속도의 가속특성에 대해서도 논의하고자 한다. 직류전기장의 인가가 전선화염에 미치는 영향은 크지 않지만 이온풍 효과에 따른 미미한 영향은 존재하며, 이것은 온도 균형 메커니즘과 연료 증발기체 분사 효과로 설명 될 수 있다.

• 센서학회지
• /
• 제29권2호
• /
• pp.93-99
• /
• 2020

A colorimetric paper sensor was used to detect volatile nitrogen-containing compounds emitted from spoiled salmon filets to determine their freshness. The sensing mechanism was based on acid-base reactions between acidic pH-indicating dyes and basic volatile ammonia and amines. A sensing layer was simply fabricated by drop-casting a dye solution of bromocresol green (BCG) on a polyvinylidene fluoride substrate, and its color-change response was enhanced by optimizing the amounts of additive chemicals, such as polyethylene glycol, p-toluene sulfonic acid, and graphene oxide in the dye solution. To avoid the adverse effects of water vapor, both faces of the sensing layer were enclosed by using a polyethylene terephthalate film and a gas-permeable microporous polytetrafluoroethylene sheet, respectively. When exposed to basic gas analytes, the paper-like sensor distinctly exhibited a color change from initially yellow, then to green, and finally to blue due to the deprotonation of BCG via the Brønsted acid-base reaction. The use of ammonia analyte as a test gas confirmed that the sensing performance of the optimized sensor was reversible and excellent (detection time of < 15 min, sensitive naked-eye detection at 0.25 ppm, good selectivity to common volatile organic gases, and good stability against thermal stress). Finally, the coloration intensity of the sensor was quantified as a function of the storage time of the salmon filet at 28℃ to evaluate its usefulness in monitoring of the food freshness with the measurement of the total viable count (TVC) of microorganisms in the food. The TVC value increased from 3.2 × 10⁵ to 3.1 × 10⁹ cfu/g in 28 h and then became stable, whereas the sensor response abruptly changed in the first 8 h and slightly increased thereafter. This result suggests that the colorimetric response could be used as an indicator for evaluating the degree of decay of salmon induced by microorganisms.

• 자원환경지질
• /
• 제45권2호
• /
• pp.79-88
• /
• 2012

최근 개발된 상용 X-선원들은 기존 선원들에 비하여 비약적으로 증가된 휘도와 집속율을 보임으로써 다양한 형태의 연구실 규모의 분말회절 분석을 가능하게 하고 있다. 더욱이, 개선된 소프트웨어 및 시료환경 장치와 더불어 2차원 검출기의 성능향상은 다양한 온도, 압력하에서의 상전이 현상 및 이온교환 반응과 같은 새로운 형태의 실시간 및 시간분해 회절실험을 가능하게 하고 있다. 본 논문에서는 (1) 나트로라이트의 이온교환 특성에 관한 실시간 측정, (2) 이온교환된 나트로라이트의 탈수 및 열팽창 특성에 관한 실시간 측정, (3) 이온교환된 나트로라이트의 정수압(靜水壓) 하에서의 상전이 현상의 관찰 등의 내용을 소개하고자 한다. 측정된 회절자료의 양과 품질은 각 반응의 진행경로를 확인할 수 있게 하고 선택된 자료의 리트벨트 분석을 통해 구조해석까지 가능케 한다. 이와 같은 형태의 개별 연구실 기반 실시간 회절분석 연구는 추후 연관되어 수행될 방사광가속기를 이용한 보다 특화된 실험에 대한 사전 예측성을 더욱 증가시킬 것으로 사료된다.

• 공업화학
• /
• 제19권1호
• /
• pp.17-26
• /
• 2008

기후변화협약에 이은 교토의정서가 발효되면서 온실가스 저감은 세계적인 당면 문제가 되어 있는 가운데 청정개발체제(CDM) 및 공동이행(JI) 등을 통한 배출권 확보가 국가적인 경쟁이 되고 있다. 이산화탄소($CO_2$) 및 메탄가스($CH_4$)와 더불어 대표적인 온실가스의 하나인 $N_2O$는 온난화효과가 $CO_2$에 비해 310배에 이르며 120년의 분해기간이 소요될 만큼 대기 중에서 매우 안정하여 성층권에서 오존층을 파괴하는 물질로 알려져 있다. 또한 $N_2O$는 분해하기가 쉽지 않아 고온 열분해 시키는 방법 외에 $400^{\circ}C$ 이상에서 촉매에 의해 선택적으로 분해시키는 방법이 알려져 있으나 대개 NOx가 같이 존재하여 $N_2O$ 분해를 방해하는 역할을 한다. 본 보문은 국내외의 $N_2O$ 발생원에 대한 내역과 더불어 각종 온실가스 저감사업에 의한 배출권 거래현황과 탄소시장의 성장 및 $N_2O$ 저감사업의 위치, $N_2O$ 촉매 분해에 관한 기술개발의 현황과 방향, 그리고 CDM 사업으로서의 전망 등을 분석 집약하였다.