• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.5
• /
• pp.466-472
• /
• 2009

An acoustic leak monitoring system(ALMS) using acoustic emission(AE) technique was applied for leakage detection of nuclear power plant's pipeline which is operated in high temperature and pressure condition. Since this system only monitors the existence of leak using the root mean square(RMS) value of raw signal from AE sensor, the difficulty occurs when the characteristics of leak size and shape need to be evaluated. In this study, dual monitoring system using AE sensor and accelerometer was introduced in order to solve this problem. In addition, artificial neural network(ANN) with Levenberg.Marquardt(LM) training algorithm was also applied due to rapid training rate and gave the reliable classification performance. The input parameters of this ANN were extracted from varying signal received from experimental conditions such as the fluid pressure inside pipe, the shape and size of the leak area. Additional experiments were also carried out and with different objective which is to study the generation and characteristic of lamb and surface wave according to the pipe thickness.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.8
• /
• pp.560-564
• /
• 2003

Thick oxide layer was fabricated by anodic reaction and complex oxidation performed by combining low temperature thermal oxidation (50$0^{\circ}C$, 1 hr at $H_2O$/O$_2$) and a RTO (rapid thermal oxidation) process (105$0^{\circ}C$, 1 min). Electrical characteristics of OPSL (oxidized porous silicon layer) were almost the same as those of thermal silicon dioxide prepared at high temperature. The leakage current through the OPSL of 20${\mu}{\textrm}{m}$ thickness was about 100 - 500 ㎀ in the range 0 V to 50 V. The average value of breakdown field was about 3.9 MV/cm. From the XPS analysis, surface and internal oxide films of OPSL prepared by complex process were confirmed completely oxidized and also the role of RTO process was important for the densification of PSL (porous silicon layer) oxidized at low temperature.

• Journal of IKEEE
• /
• v.27 no.1
• /
• pp.19-24
• /
• 2023

Since silicon having a band gap energy of about 1.12 eV are limited to a maximum operating temperature of less than 250 ℃, the sample with MIS structure based on the SiC substrate of wide-band gap energy was manufactured and the hydrogen response characteristics at high temperatures were investigated. The dielectric layer applied here is a tantalum oxide layer that is highly permeable to hydrogen gas and shows stability at high temperatures. It was formed by RTO at a temperature of 900 ℃ with tantalum. The thickness, depth profiles, and leakage current of the tantalum oxide layer were analyzed through TEM, SIMS, and leakage current characteristics. For the hydrogen gas response characteristics, the capacitance change characteristics were investigated in the temperature range from room temperature to 400 ℃ for hydrogen gas concentrations from 0 to 2,000 ppm. As a result, it was confirmed that the sample exhibited excellent sensitivity and a response time of about 60 seconds.

• Journal of Korea Multimedia Society
• /
• v.14 no.2
• /
• pp.228-237
• /
• 2011

The risk of leakage or theft of critical data which is stored in database is increasing in accordance with evolution of information security paradigm. At the same time, needs for database security have been on the rapid increase due to endless leakage of massive personal information. The existing technology for prevention of internal information leakage possesses the technical limitation to achieve security goal completely, because the passive control method including a certain security policy, which allows the only authorized person to access to DBMS, may have a limitation. Hence in this study, we propose Query Signature System which signatures the queries accessing to the critical information by interrupting and passing them. Furthermore this system can apply a constant security policy to organization and protect database system aggressively by restricting critical query of database.

• Fire Science and Engineering
• /
• v.28 no.6
• /
• pp.90-98
• /
• 2014

Lately accidents of harmful chemical substance in korea were repeatedly replaying. We studied problems and preparation plan in 2008 years~2014 years through analysis cases of harmful chemical substance. Leakage of chemical substance's accident situation shows that leakage in the workplace is the most 10 cases, accounting for 58.6% is the largest proportion in 2009. Leakage according to explosion accounting for 50% (5 cases) in 2004, 25% (4 cases) in 2007 and 33.3% (4 cases) in 2011 has very irregular change. Therefore, A major cause of accidents is lack of safety management. Harmful chemical substance showed various aspects, high residual substance and non-visible characteristic so response and recovery was easy. And the second damage to move a distance causes environment pollution. So a mutual-assistance system and integrated system of related organization have to build and expert of chemical incident response and therapist of chemical substance response have to establish to do efficient and rapid response.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.5
• /
• pp.586-591
• /
• 2001

Objective : Transseptal or sublabial transsphenoidal surgery has been standard teatment for pituitary tumors for decades. However, as an alternative to this surgery endonasal endoscopic technique has been reported with encouraging results. We have started endoscopy-assisted transsphednoidal surgery from May 1998. In this paper we analyzed the methods, outcome, advantage and disadvantage of this surgical approach for the purpose of planning optimal treatment of pituitary tumors. Methods : This study consisits of 13 cases of pituitary tumors who were treated by endoscopy-assisted transsphenoidal surgery using one nostril from May 1998 to July 1999. Mean follow up period was 12.9 months. Results : There was no septal or sublabial incision and little surgical damage to nasal structure. With this technique, rapid surgical approach and short hospital day were possible, being 3-6 days in patients without CSF leakage. Using various angled endoscope, good surgical view was obtained. Initially it was difficult to use various instruments in narrow nasal cavity, but became feasible after several procedures. Among 13 cases, total removal was possible in 11 cases. One of two cases in whom tumor was incompletely removed underwent gamma-knife radiosurgery and second underwent reoperation through subfrontal approach. There were 6 cases of hormone secreting tumors and hormonal remission was achived in all of these cases. Postoperative complications were CSF leakage(6 cases), diabetes insipidus(2 cases) and panhypopituitarysm(1 case). Lumbar drainage was done in all cases of CSF leakage. Conclusion : The advantage of endoscopy-assisted transsphenoidal surgery are rapid surgical approach, low postoperative morbidity, short hospital day and good surgical view. The disadvantage of this appoach are difficulty in manupulating various instruments in narrow nostril and difficulty in distance perception but these problems can be overcome by practice and using stereoscopic endoscope.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.1
• /
• pp.11-16
• /
• 2016

The conduction behavior and electron concentration change in a-IGZO thin-films according to the RTA (rapid thermal annealing) were studied. The electrical characteristics of TFTs (thin-film-transistors) annealed by different temperatures were measured. The sheet resistance, electron concentration, and oxygen vacancy of a-IGZO film were measured by the four-point-probe-measurement, hall-effect-measurement, and XPS analysis. The RTA process increased the driving current of IGZO TFTs but the VTH shifted to the negative direction at the same time. When the RTA temperature is higher than $250^{\circ}C$, the leakage current at off-state increased significantly. This is attributed to the increase of oxygen vacancy resulting in the increase of electron concentration. We demonstrate that the RTA is a promising process to adjust the VTH of TFT because the RTA process can easily modify the electron concentration and control the conductivity of IGZO film with short process time.

• The Journal of Fisheries Business Administration
• /
• v.46 no.1
• /
• pp.145-155
• /
• 2015

This study aims to look at the change in consumer awareness and behavior after Japan's 2013 nuclear power plant's radioactive water leakage and draw implications about them. Findings show that 81% of respondents decreased their consumption of fishery products after the nuclear incident, and kept on showing avoidance of imported fishery products including those from Japan. Also it showed that consumers more importantly considered safety when buying imported fishery products after the nuclear incident. The most common channel of receiving radioactivity safety information on fishery products were TV and online. However, the main reason for decreasing the consumption of fishery products was founded to be based on the inaccuracy of the information provided. However, many people said that they will increase their consumption of all fishery products if provided with accurate radioactivity information. Therefore, if accurate radioactivity information were to be spread effectively to the public, positive consumption rates of fishery products can be shown in the future. The inaccuracy of radioactivity safety information caused the rapid decrease of fishery products consumption in 2013 to be amplified. Therefore, this study showed the importance of the delivery of rapid, accurate and consistent information to consumers.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.58.1-58.1
• /
• 2010

We have developed a novel crystallization process, where the crystallization temperature is lowered compared to the conventional RTA process and the metal contamination is lowered compared to the conventional VIC process. A very-thin a-Si film was deposited and crystallized at $550^{\circ}C$ for 3 h by the VIC process and then a thick a-Si film was deposited and crystallized by the RTA process at $680^{\circ}C$ for 5 min using the VIC poly-Si layer as a crystallization seed layer. The RTA crystallized temperature could be lowered up to $50^{\circ}C$, compared to RTA process alone. The poly-Si film appeared a needle-like growth front and relatively well-arranged (111) orientation. In addition, the Ni concentration in the poly-Si film was lowered to $3{\times}10^{17}\;cm^{-3}$ and that at the poly-Si/$SiO_2$ interface was lowered to $5{\times}10^{19}\;cm^{-3}$. The reduction in metal contamination could be greatly helpful to achieve a low leakage current in poly-Si TFT, which is the critical parameter for commercialization of AMOLED.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.335-336
• /
• 2014

This paper investigates the design of coupled inductor for minimum inductor current ripple in rapid traction battery charger systems. Based on the general circuit model of coupled inductor together with the operating principles of dc-dc converter, the relationship between the ripple size of inductor current and the coupling factor is derived under the different duty ratio. The optimal coupling factor which corresponds to a minimum inductor ripple current becomes -1, i.e. a complete inverse coupling without leakage inductance, as the steady-state duty ratio operating point approaches 0.5. In an opposite manner, the optimal coupling factor value of zero, i.e. zero mutual inductance, is required when the steady-state duty ratio operating point approaches either zero or one. Coupled inductors having optimal coupling factor can minimize the ripple current of inductor and battery current resulting in a reliable and efficient operation of battery chargers.