• 의료법학
• /
• 제15권2호
• /
• pp.317-343
• /
• 2014

In order to account for whether a doctor should indemnify damages resulted from violation of duty of care, the fact that a doctor violated duty of care, that damages were incurred, and the link between violation of duty of care and damages incurred, respectively, should be verified. So even though a doctor violated duty of care to patients, he or she will not bear the responsibility to indemnify damages unless it is not verified. If a doctor's negligence in medical practices is assessed that obviously unfaithful medical practice far exceeds the limit of admission of a patient, it will not go against people's general perception of justice or law and order to constitute a medical malpractice itself as an illegal action that will require liabiliy for damage. However, when the limit of admission is set too low, a patient's benefit and expectation of proper medical treatment can be violated. In contrast, if the limit of admission is set high, it can leave too little room for doctors' discretion for treatments due to a bigger risk of indemnification for damages. Thus, a reasonable balance that can satisfy both benefit and expectation of patients and doctors' right to treatment is needed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.749-751
• /
• 1999

We acquired operating data in an existing steam turbine power plant using analog control system to investigate operation characteristics. We analyzed a load control logic to develop a digital turbine control system. The load control logic is constituted of load target, load reference, loading rate, load limit and admission mode transfer of valve. The result of this paper is utilized to implement a digital turbine control system.

• 농촌계획
• /
• 제4권1호
• /
• pp.56-62
• /
• 1998

This study makes a general view of human-, natural environment, actual condition of use, management and administration of Sissinghurst castle garden and proposes the following directions for our model of herb industry, herb garden plan with the analysed results. 1) The location of herb garden should be selected at a place where Is close to scenic spots, sight-seeing place or big city and conveniently situated, 2) For the basic design of herb garden, the ecological features, human -, natural environment should be analysed and for the implementation of the plan, it should have variety and coordination to give the pleasure and appreciation to the users. 3) For the plan of herb garden, time limit system and number limit admission have to be introduced by calculating carrying capacity so that the user can have a comfortable atmosphere and the garden should be environment - friendly.

• 한국시스템다이내믹스연구
• /
• 제10권2호
• /
• pp.5-27
• /
• 2009

Multiplex is a representative culture facility of citizens. Therefore, a lot of researches and investment on multiplex are carried out to improve benefits of service suppliers and users. Especially, focused on main services of a theatre such as ticket booking and issuing within multiplex, examination of tickets, admission information of movie screens and screening information inquiry, improvement activities are carried out. However, it is not enough to evaluate on what efficiency the above efforts have in the viewpoint of customer benefits and business. Therefore, this study analyzed value and limit of the newest service of multiplex applying the existing ubiquitous concept(u-multiplex service), and proposed a model and a plan for improving the existing services. The study interviewed with specialists in the related field and applied workshop-shape group interview to 110 university students and simulated service models. The contribution of the study is to analyze the value and limit of the existing multiplex service objectively, and to propose a new service model and plan to improve its limitation. In the future, the study plans to research on service models by extending space and functional roles of multiplex to the whole subsidiary facilities including movie screens.

• Journal of Communications and Networks
• /
• 제17권5호
• /
• pp.534-540
• /
• 2015

In this paper we propose an analytical model for jitter, wherein we implement the interrupted Poisson process (IPP) for incoming traffic. First, we obtain an analytical model for the jitter on one node with respect to the phase probabilities, traffic load, and tagged traffic share in the aggregate traffic flow. Then, we analyze N-node cases, and propose a model for end-to-end jitter. Our analysis leads to some fast-to-compute approximations that can be used for future network design or admission control. Finally, we validate our analytical results by comparing them with previous results for limit cases, as well as with event-driven simulations. We propose the use of our results as guidelines for jitter evaluation of real IP traffic.

• 대한안전경영과학회지
• /
• 제17권4호
• /
• pp.241-246
• /
• 2015

Generally a patient who was injected radiopharmaceuticals for nuclear medicine examination is not an object of isolation. Therefore, when the patient uses toilet, we expect surface contamination of a toilet by radioisotope. The measured value is $25.69Bq/cm^2$(a restroom near admission and administration), $19.39Bq/cm^2$(a toilet near department of radiology). The study shows that 9 of 24 locations in controlled area exceed over surface contamination limit. From now on, we should find source of contamination through measurement radioactive nuclide to apply radiation safety management.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2009년도 춘계 종합학술대회 논문집
• /
• pp.1097-1101
• /
• 2009

전문대학 제도가 도입된 이래 저속적인 성장을 거듭하던 2년제 대학은 입학정원이 줄어들면서 그 존립마저 위협받고 있다. 이러한 상황에서 각 대학들은 입시생들을 유치하기 위한 각종 온라인 콘텐츠를 개발하고 이를 통해 대학홍보 및 각종 입시정보를 알리고 있다. 그러나 온라인 콘텐츠가 어떤 경로로 입시생들에게 접근되는지와 지원과 등록에 미치는 영향력이 어떻게 달라지는지에 대한 체계적이고 수치적인 연구가 미비한 실정이다. 이에 본 논문에서는 전문대학의 온라인 콘텐츠가 입시 모집시기별로 지원과 등록에 미치는 영향을 분석하였고, 입시생들의 온라인 콘텐츠 인지가 모집 시기에 따라 어떠한 차이를 보이는지 분석하였다.

• 한국식생활문화학회지
• /
• 제3권2호
• /
• pp.211-217
• /
• 1988

The Main objective of this study is to find consumer attitude toward the Sanitary Regulation of Foods. In view of consumerism, this result will be used in re-regulating the law. Among the Sanitary Regulation of Foods, this study focuses on the Standard of prepackaged Food Labelling, because it is related both with the advertising from the food manufacturer's point of view and with the perception about the food itself from the consumer's point of view. After reviewing the previous studies and related provisions about the Standard of Prepackaged food Labelling, and compare other sanitary regulation of foods in developed countries (U.S.A. and Japan), basic research framework was derived. The research framework focuses on the user perception about the validity of provisions about the Standard of Prepackaged Food Labelling, and on the existance of exaggeration in food advertising using prepackaged foods. Data were collected through questionaires from the sample covering 374 food customers. The data were analyzed by frequency test and the important findings of this study are as follows. Most food consumers consider such provisions as date of manufacturing, circulation time limit, cautions for food handling, price, and manufacturer as important factors in buying food products. Among these factors, the date of manufacturing and circulation time limit are most critical factors, and must be labelled correctly on the prepackaged food cover. But other provisions which do not affect on consumer's buying decision (e.g. business admission number, self standard number) need not be labelled. From this study, we can conclude that the provisions about the standard of prepackaged Food Labelling currently used must be devided into two parts. One is 'mandatory provisions' which must be obeyed by all food manufacturets, and the other is 'autonomous provisions' which need not be obeyed by all food manufacturers. And mandatory provisions need to be regylated more strongly than now.

• 대한산업공학회지
• /
• 제29권3호
• /
• pp.247-252
• /
• 2003

We propose an approximation of the M/G/1 system with finite workload capacity, where those customers whose admission to the system would increase the workload beyond a prespecified finite capacity limit are not accepted. Our approximation method is based on the idea that the service time of a customer in the M/G/1 system can be approximated as the sum of service times of a batch of customers in the $M^X/d/1$ system where the deterministic service time d is small enough. That is, the original service time is discretized and approximated by the batch size. We exemplified our method by obtaining the average workload of the M/M/1 system by means of the $M^X/d/1$ system, where the batch size is geometric. In addition, the approximate blocking probabilities of the M/M/1 and $M/E_k/1$ system with finite workload capacities are sought. The proposed method turns out to give a good approximation, which is compared with a simulation.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2003년도 춘계공동학술대회
• /
• pp.247-251
• /
• 2003

In this paper, we propose an approximation of the M/G/1 system with finite workload capacity, where customers whose admission to the system would increase the workload beyond a prespecified finite capacity limit are not accepted. Our approximation method is based on the idea that the service time of a customer in the M/G/1 system can be approximated as the sum of service times of a batch of customers in the $M^{X}/d/1$ system where the service time is deterministic and very small. That is, the original service time is discretized and approximated by the batch size. We exemplified our method by obtaining the average workload of the M/M/1 system by means of the $M^{X}/d/1$ system, where the batch size is geometric. In addition, the approximate blocking probabilities of the M/M/1 and $M/E_{k}/1$ system with finite workload capacities are sought. The proposed method turns out to give a good approximation, which is compared with a simulation.