• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.204-207
• /
• 2003

This paper presents the electrical properties of PTFE (polytetrafluoroethylene) nozzle for circuit breaker. PTFE has been used widely as a nozzle material for circuit breaker. In the arcing environment in a circuit breaker, radiation is considered to be the major energy transport mechanism from the arc to the wall. The fraction of the radiation power is emitted out of the arc and reaches the nozzle wall, causing ablation at the surface and in the depth of the wall. The energy concentration in the material lead to the depolymerization and eventually lead to the generation of decomposed gas as well as some isolated carbon particles. The generation of the decomposed gas in the depth of the material causes inner explosion. The surface of nozzle becomes uneven. The flow of gas is not uniform due to the unevenness of the surface. Adding some fillers into PTFE is expected to be efficient for improving the endurability against radiation. In this experiment, three kinds of fillers that have endurance in the high temperature environment were added into PTFE. Dielectric constant, dissipation factor, electrical resistivity and dielectric strength of PTFE composites were investigated.

• Korean Chemical Engineering Research
• /
• v.59 no.3
• /
• pp.359-365
• /
• 2021

We investigated experimentally the ignition characteristic of dust and the hazard evaluating for electrostatic discharge. The ignition energy experiments were performed on sample dusts such as PE(HD), PE(LD), PMMA using the MIKE-3 apparatus. The formation of flame during the ignition of PE(HD) dust clouds occurred after the delay time of about 8 ms, and the flame kernels were not observed in center of ignition occurrence area. The voltage increased with increasing the number of dust dispersions and the increase rate of measured voltage with dust concentration was the highest in the order of PMMA, PE(LD) and PE(HD). For the effect of dispersion condition on the voltage in PE(HD) dust, the results were obtained that the voltage increased as the number of dispersions increased and as the concentration increased under the same dispersion number. The safety voltages to prevent fire and explosions by electrostatic ignition were estimated that PE(HD), PE(LD)-1, PE(LD)-2, and PMMA were 2.58, 44.72, 25.82, and 8.16 kV, respectively. We proposed the method for estimating the minimum ignition energy by using the measured voltage data for efficient investigation of electrostatic ignition hazard.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.8
• /
• pp.811-819
• /
• 2012

An air-cooled condenser is a device that is used for converting steam into condensate by using ambient air. The air-cooled condenser is prone to suffer from a serious explosion when the condensate inside the tubes of a heat exchanger is frozen; in particular, tubes can break during winter. This is primarily due to the structural problem of the tube outlet of an existing conventional air-cooled condenser system, which causes the backflow of residual steam and noncondensable gases. To solve the backflow problem in such condensers, such a system was simulated and a new system was designed and evaluated in this study. The experimental results using the simulated condenser showed the occurrence of freezing because of the backflow inside the tube. On the other hand, no backflow and freezing occurred in the advanced new condenser, and efficient heat exchange occurred.

• Korean Business Review
• /
• v.17
• /
• pp.27-52
• /
• 2004

The miraculous growth of Korean economy and its business corporations during 1960' s and 1970's are mainly due to the government leadership and its market intervention. We can find the reasons why the government initiated economic growth plan was so successful in Korea in its efficient bureaucratic government system and fair discipline to the corporations based on its contribution to the economy. During 1960's, the primary factors for the growth of business entities and the formation of business groups were the financial special favor, the preferential treatment in the new industry entrance and the merge & acquisition, lavish export incentives from the government, and the export explosion to Vietnam. During 1970's, the substantial deduction of corporations' private debt, enormous support in heavy industry investment, special benefits to general trading companies by the government, and the construction export to the Middle-East were the main causes of the business growth and the business groups formation. Also, the economic rent for the big companies had still been effective since 1960's. However, the preferential benefit to the big companies made them to diversify into the unrelated business ares and to be in very vulnerable financial position. The governmental support brought about the monopoly as well.

• Journal of Digital Convergence
• /
• v.16 no.6
• /
• pp.197-204
• /
• 2018

The realistic Visual Effects using fluid simulation in 3D computer graphics are operated as important factors to improve the quality of images. The process of creating realistic motions of water, fire, explosion by controlling each property of fluid is called fluid simulation. In general, the creation of a fluid simulation concentrates on the main simulation work phase, however an effective method for initial set up is important for the main simulation work. The purpose of this study is to analyze the factors involved in the initial emission motion and shape of fluid and propose methods that can efficiently apply this into the initial set up. For the process of the research, first, problems are raised based on related researches, and second, two experiments, 'Dynamic Fluid Emitter Creation' and 'User Design Type Emission Velocity Solution', are conducted for more effective fluid simulation. Through this research, the effective fluid simulation of initial set up phase will be suggested through the user design-type emission control solutions.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.5
• /
• pp.151-160
• /
• 2022

Owing to the recent increase in the frequency of explosion accidents, blast resistive design has garnered attention to reduce the damage of important structural elements. However, domestic research on the blast resistive structures is still insufficient, and domestic design guideline against blast loads are not documented yet. In this study, a numerical study on the RC blast resistive walls, where the test variable was the presence of FRP sheet, was performed using LS-DYNA program. Based on the numerical results, displacement-time hysteretic curve, pressure-impulse diagram, and fragility curve of the test specimens were derived. It was shown that the FRP sheet strengthening method is efficient to improve the blast resistive performance of the RC wall. Also, the strengthening effect of FRP sheet on the RC wall was stronger when the magnitude of the blast load was greater.

• Journal of the Korean Institute of Gas
• /
• v.16 no.5
• /
• pp.1-6
• /
• 2012

It becomes a more and more common practice to build facilities bigger and more integrated in an effort to optimize the process within limited resources and spaces. As the capacity of facilities increases, so does the flow rate and pressure. This in turn leads to a high consequence of accident. Not only are these facilities vulnerable to leakage because of their high pressure, but also subsequent fire and explosion can be threatening. For these reasons, there is an urgent need to come up with solutions to assess and minimize the damage from an accident. The Quantitative Risk Assessment(QRA) is one of the most efficient ways to solve problems on pressurized pipelines. The QRA can be re-enforced by applying reduction factors. In this study various types of accidents in a pressurized pipeline were evaluated. The damage from accidents were computed, then. Finally the reduction factors were very effective to decrease consequences of high pressure pipeline accidents.

• Journal of Advanced Navigation Technology
• /
• v.17 no.6
• /
• pp.792-797
• /
• 2013

4D film is just a film that made by adding some physical effects to 3D film or general film. In order to provide physical effects to the audience, the data that make the physical effect must be added to each frames. In this paper, we proposed a video detection system that can efficiently provide physical effects by assessing the present situation such as explosion scene, snowing scene. The proposed video detection system contains an algorithm for fire detection by using R color and $C_r$ value, and also an algorithm for snow detection by using RGB color model. The system constitutes in a MCU that from 8051 family. In the performance evaluations, the result shows that 91% of detection rate in case of fire and 25% of false detection rate in case of snow. Also the system is capable of providing physical effects automatically.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.5
• /
• pp.21-26
• /
• 2016

With the increased desire of TV consumers for interactivity and personalization, IPTV has been rapidly spread in recent years. IPTV can provide a variety of services through hundreds of channels, but the explosion of TV channels makes users even more difficult to find their desired contents. In addition, the channel zapping delay of IPTV is serious due to the limited network bandwidth. To resolve these problems, this paper distinguishes hot and cold channels by exploiting the real-time viewing rate as well as each user's viewing history, and then, maintains hot channels in the hot list, which is searched first during channel navigation and also prefetched to support the preview of channels. Experimental results show that the proposed scheme improves the IPTV channel seek time significantly compared to existing channel seeking interfaces.

• Journal of KIISE:Computer Systems and Theory
• /
• v.29 no.9
• /
• pp.530-538
• /
• 2002

In this paper, we propose a new caching strategy for web servers. The proposed algorithm collects on]y the statistics of the requested file, for example the popularity, when a request arrives. And, at times, only files with higher popularity are cached all together. Because the cache remains unchanged until the cache is made newly, web server can use very efficient data structure for cache to determine whether a file is in the cache or not. This increases greatly tile efficiency of cache manipulation. Furthermore, the experiment that is performed with real log files built by web servers shows that the cache hit ratio and the cache hit ratio are better than those produced by LRU. The proposed algorithm has a drawback such that the cache hit ratio may decrease when the popularity of files that is not in the cache explodes instantaneously. But in our opinion, such explosion happens infrequently, and it is easy to implement the web servers to adapt them to such unusual cases.