References
- Wilber, K.R. and Zammit, K., 2005, "Development of Procurement Guidelines for Air-Cooled Condensers," Vol. 11, pp. 8-9.
- Kroger, D.G., 2004, "Air-Cooled Heat Exchangers and Cooling Towers: Thermal-Flow Performance Evaluation and Design," Pennwell Corp, Vol. 1, pp. 1-50.
- Putman, R.E. and Jaresch, D., "The Impact of Air-Cooled Condensers on Plant Design and Operations," pp. 11-12.
- Heyns, J.A., 2008, "Performance Characteristics of and Air-Cooled Steam Condenser Incorporating a Hybrid (Dry/Wet) Dephlegmator," University of Stellenbosch.
- Van Rooyen, J. and Kroger, D., 2008, "Performance Trends of an Air-Cooled Steam Condenser Under Windy Conditions," Journal of Engineering for Gas Turbines and Power, Vol. 130, pp. 4-10.
- Honing, W., 2009, "Steam Flow Distribution in Air-Cooled Condenser for Power Plant Application."
- Giampietro, F., 1997, "Analysis of Vapor Back Flow in Single-Pass Air-Cooled Condensers," International Journal of Heat and Mass Transfer, Vol. 40, pp. 3969-3979. https://doi.org/10.1016/S0017-9310(97)00024-0
- Giampietro, F., 2000, "Effect of Disuniformities in Vapor Saturation Pressure and Coolant Velocity on Vapor Back Flow Phenomena in Single-Pass Air-Cooled Condensers," International Journal of Heat and Mass Transfer, Vol. 43, pp. 147-159. https://doi.org/10.1016/S0017-9310(99)00124-6
- Berg, W. and Berg, J., 1980, "Flow Patterns for Isothermal Condensation in One-Pass Air-Cooled Heat Exchangers," Heat Transfer Engineering, Vol. 1, pp. 21-31. https://doi.org/10.1080/01457638008939565
- FABBRI, G.A., 1997, "Analysis of the Noncondensable Contaminant Accumulation in Single-Pass Air-Cooled Condensers," Heat Transfer Engineering, Vol. 18, pp. 50-60. https://doi.org/10.1080/01457639708939896
- Fabbri, G., 1996, "Analysis of the Effectiveness of Single-Pass Air-Cooled Condensers," in Proceedings of the Second European Thermal-Sciences Conference, Rome, Italy.
- Schulenberg, F.J. and A.S.o.M. Engineers, 1965, "Finned Elliptical Tubes and Their Application in Air-Cooled Heat Exchangers," in Journal of Eng. for Industry, Trans of ASME.
- Rozenman, T. and Pundyk, J., 1974, "Effect of Unequal Heat Loads on the Performance of Air-Cooled Condensers," Vol. 70, pp. 178-184.
- Larinoff, M., Moles, W. and Reichhelm, R., 1974, "Design and Specification of Air-Cooled Steam Condensers," Chemical Engineering, Vol. 85, pp. 86-94.
- Brown, J., Benkley, G. and Bendley, G., 1974, "Heat Exchangers in Cold Service-A Contractor's View," Chemical Engineering, Vol. 70, pp. 59-62.
- Rabas, T., 1981, "Tubeside Exit Condition with Complete Condensation in Multitube Cross-Flow Heat Exchangers," Chemical Engineering Communications, Vol. 10, pp. 13-24. https://doi.org/10.1080/00986448108910922
- Breber, G., Palen, J. and Taborek, J., 1982, "Study on Noncondensable Vapor Accumulation in Air-Cooled Condensers," Heat Exchangers, Vol. 18, pp. 263-268.
- Incropera, F.P., et al., 2011, "Fundamentals of Heat and Mass Transfer," Whiley, Chap 11.
- Cengel, Y.A. and Boles, M.A., 2006, "Thermodynamics: and Engineering Approach, McGraw-Hill Higher Education.
- http://www.mhtl.uwaterloo.ca/old/onlinetools/airprop/airprop.html.
Cited by
- Anti-Freezing Mechanism Analysis of a Finned Flat Tube in an Air-Cooled Condenser vol.10, pp.11, 2017, https://doi.org/10.3390/en10111872