• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.2
• /
• pp.225-231
• /
• 2020

Fresh water that can be used by a person of the total amount of water on the planet is increased because it is less than 0.01 % except underground water, ice and snow, etc. water management response need. In order to protect and efficiently utilize water resources, major countries are conducting water footprint studies that can quantitatively estimate the amount of water put into the operating phase of the resource harvesting phase, mainly agriculture. Korea has also recently developed a number of policies in order to cope with water shortages, and in the construction industry, as well as the need for basic research to support it has been emphasized. This study was constructed DB up to the raw material harvesting step, the transport step, the production stage in order to estimate the water consumption of resources to be put into the work process to target the drainage of the road. Water usage estimation method was utilized the method presented in the Water Footprint Manual and the environmental score card certification guide, unit water usage each drainage main method was calculated after estimating the water footprint considering the water character factor, indirect water and the direct water, the water consumption factor of material input to each process. Brown asphalt, rebar, remicon of the drainage material as a result of the water footprint calculation accounted for 97 % of the total. Drainage method is a culvert, a side channel, a culvert wing wall, reinforced concrete open channel accounted for 92.2 % of the total. Drainage total step-by-step calculated water consumption and water footprint was found in order of raw material harvesting step, transport stage, production stage. Water footprint each drainage method or total drainage material calculated in this study can be used as a base data in the agricultural and construction sectors. In order to increase the reliability of the analysis, it is believed that further overseas databases will be needed for continuous review and research.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.6
• /
• pp.85-96
• /
• 2018

Developed nations have implemented various policies to reduce greenhouse gases since the 1997 Kyoto Protocol in order to minimize the effects of global warming. Korea should also reduce energy consumption in the industrial sector, and the transportation and building sectors in order to achieve its greenhouse gas reduction target of 37 percent compared to the Business As Usual levels. The government implements various laws and regulations for reducing energy consumption. To reduce energy consumption in the building sector, in particular, the Energy Conservation Design Standards are enforced according to the 'Enforcement Support for Green Building Construction'. The amount of electricity used to maintain room temperature at $28^{\circ}C$ in these buildings have a 30% reduction (measured on the walls and rooftop) in power usage compared to buildings not required to meet these standards. Although the effect of these energy savings on landscaping is proven, this demonstration is not effective for energy saving since it is not a suitable method for the 'Energy Saving Design Standards of Buildings'. For landscaping to be effective as far as a component of energy reduction, the perfusion rate of the building should be calculated based on the thermal conductivity of the component materials for the energy saving designs with respect to the basis of Article 14 of the Green Building Act. Therefore, the purpose of this study is to ensure that the planting-based mats currently being widely used in the landscape industry can have insulating performance suitable for the 'Energy Saving Design Standards' of Buildings according to the 'Enable Green Building Construction Methods'.

• Tunnel and Underground Space
• /
• v.21 no.1
• /
• pp.11-19
• /
• 2011

Geothermal energy is believed to be an important source among the renewable energy sources to provide the base load electricity. Although there has been a drastic increase in the use of geothermal heat pump in Korea, there is no geothermal power plant in operation in Korea. Fortunately, the first EGS (Enhanced Geothermal System) Project in Korea has started in Dec 2010. This five year project is divided into two stages; two years for exploration and drilling of 3 km depth to confirm the minimum target temperature of 100 degrees, and another three years composed drilling 5 km doublet, hydraulic stimulation of geothermal reservoir with expected temperature of 180 degrees (40 kg/s) and construction of MW geothermal power plant in the surface. This EGS project would be a landmark effort that invited a consortium of industry, research institutes and university with expertises in the fields of geology, hydrogeology, geophysics, geomechanics and plant engineering.

• Economic and Environmental Geology
• /
• v.56 no.6
• /
• pp.697-714
• /
• 2023

The Tracksite of Cretaceous Dinosaurs and Pterosaurs in Jeongchon, Jinju was discovered in late 2017 during the construction of the Ppuri industry complex. This site is a natural heritage site with a high paleontological value, as it preserves fossils of various types of dinosaurs, pterosaurs, and animal traces at a dense concentration. In this study, we surveyed that physical weathering such as joint, crack, scaling, exfoliation, and fragmentation occurred through field research in the fossil site, and conducted basic research on conservation science to reduce the damage. To this end, among the eight levels identified after excavation, the rocks of Level 3, which yielded a large number of theropod footprint fossils, and Level 4, which yielded pterosaur footprint fossils, were analyzed for material characteristics and evaluation of the effectiveness of consolidation and adhesion. This results showed that the rocks in the Level 3 stratum were dark gray siltstone and the rocks in the Level 4 stratum were dark gray shale, which contained a large amount of calcite and were composed of quartz, plagioclase, mica, alkali feldspar, and other clay minerals, which are likely to be damaged by rainfall under external conditions. As a result of conducting an artificial weathering experiment by dividing the probationary sample into four groups: untreated, consolidation treatment, anti-swelling treatment, and adhesive treatment, the consolidation and the swelling inhibitor showed an effect immediately after treatment, but did not show a blocking effect under a freezing-thawing environment. The adhesive showed that the adhesive effect was maintained even under freezing-thawing conditions. In order to preserve the fossil sites at Jeongchon in the future, in addition to temporary measures to block the inflow of moisture, practical measures such as the construction of protective facilities should be prepared.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.12 no.1
• /
• pp.8-16
• /
• 2024

Limestone (CaCO₃, calcium carbonate), which is used as a raw material in the portland cement and steel industry, emits CO₂ through decarbonation by high temperatures in the manufacturing process. To reduce CO₂ emissions by the use of raw materials like limestone, it has been proposed to replace limestone with various industrial by-products that contain CaO but less or none of the carbonated minerals, that cause CO₂ emissions. Loss of Ignition (LOI), Thermogravimetric analysis (TG), and Infrared Spectroscopy (IR) are used to quantitative the amount of CO₂ emission by using these industrial by-products, but CO₂ emissions can be either over or underestimated depending on the characteristics of by-product materials. In this study, we estimated CO₂ contents by LOI, TG, IR and DTG(Differential Thermogravimetric analysis) of calcite(CaCO₃) and samples that contain CO₂ in the form of carbonate and whose weight increases by oxidation at high temperatures. The test results showed for CaCO₃ samples, all test methods have a sufficient level of reliability. On the other hand, for the CO₂ content of the sample whose weight increases at high temperature, LOI and TG did not properly estimate the CO₂ content of the sample, and IR tended to overestimate compared to the predicted value, but the estimated result by DTG was close to the predicted valu e. From these resu lts, in the case of samples that contain less than a few percent of CO₂ and whose weight increases during the temperature that carbonate minerals decompose, estimating the CO₂ content using DTG is a more reasonable way than LOI, TG, and IR.

• Korean Journal of Health Education and Promotion
• /
• v.24 no.5
• /
• pp.87-101
• /
• 2007

Objectives: This study identified the labor union associates' perception and participation status on SHEW and analyzed these two Constructs correlations with Safety and health education at work(SHEW) in manufacture and construction industries. Methods: Self-administered survey was successfully finished by 103 labor union associates (91 employed in 78 manufacturing companies and 12 employed in 12 constructing companies over 12 areas). Two questionnaires, survey direction slip, the official letter to ask survey participation from Korea Ministry of Labor, and a posted envelop to return were delivered to each workplace labor union office in conveniently selected companies. Most participants' companies were at least medium to large in manufacturing industry and most associates were men and married. A survey questionnaire examined demographic characteristics, SHEW status (participation status included), and perceptions of SHEW. Results: Overall, manufacturing companies had better infrastructures for SHEW, employer support for SHEW, and current educators' competencies than constructing companies. These infrastructures for SHEW were closely correlated with company labor union participation on SHEW and the correlation coefficients were greater than any other expectations or needs variables for SHEW. Conclusions: The primary strategies for better participation and support from labor union need to be developed in supporting for organizational infrastructures related to SHEW and strengthening safety and health education training programs for supervisors or educators at work.

• Journal of Digital Contents Society
• /
• v.11 no.3
• /
• pp.315-322
• /
• 2010

This study focused on mobile trend in diffusion of smart phone. Presently, it has been evolved from digital nomad to smart nomad. Smart nomad era is based on digital technology with mobility and being smart. Smart nomad that is made up high-end device and intellectual content has changed structure of industry and life style. Smart phone is a core key in smart nomad era. In 2010 smart phone has been distributed about 2.5 hundreds million which is 20% of whole mobile phone sales and the volume of smart phone sales will be getting bigger and bigger in near future. Although, there are various reasons for success of smart phone market, this research focused 4 reasons: first, development of mobile device, second, evolution of mobile content distribution, third, support of government system, fourth, success of Docomo i-mode and Apple i phone. Smart phone will grow up more rapidly. Smart phone eco-system will be more competitive in the world. In Korea, smart phone eco-system also will be very competitive. For success in the middle of this competitive environment, Korea should lead the competitive phase with development of ability of creation software and content, construction of various partnership and evolution of next generation technology and service.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.3
• /
• pp.282-288
• /
• 2023

In this study, we analyzed the amount of roadside fine dust generated from newly constructed specially modified asphalt pavement and general asphalt pavement from existing roads. We collected the 1,000 g (100 g/day) of dust samples from the roadside of the express bus terminal and commercial facility area in Chungcheongnam-do's C site at three-day intervals during the summer of 2022 and 2023. The collected samples were separated from fine dust according to size in the 75-150 ㎛ range and, were separated only from Tire and Road Wear Particles through density separation. No.1-3 are general asphalt pavement section as an existing road. Fine dust and Tire and Road Wear Particles in No.1-3 were 24.27 g, 24.36 g, 0.53 g, and 0.53 g, respectively, and the quantitative results for 2022 and 2023 were similar. On the other hand, No.4-6 are newly constructed specially modified asphalt pavement section. Fine dust decreased by 14.8 % and tire and road wear particles decreased by 29.6 % in 2023 compared to 2022 in No.4-6. In addition, according to the results of thermogravimetric analysis, Tire and road wear particles in No.1-3 are tire and road components at 30 % and 70 %, respectively. And Tire and road wear particles in No.4-6 are tire and road components at 35 % and 65 % in 2023, respectively. From these results, it was confirmed that the newly constructed specially modified asphalt pavement can be effective in reducing roadside fine dust and Tire and Road Wear Particles. However, there may be some shortcomings in conclusive research results due to limited space and sample collection period. In the future, we plan to conduct various case studies.

• Korean Security Journal
• /
• no.14
• /
• pp.195-214
• /
• 2007

The purpose of this research is to suggest a construction device that can transform a public safety, security service, security system on counter-terrorism device system, from government leading type to private management type. There are purpose on this thesis to research for the bringing up counter-terrorism experts certification system and about all sorts of developed device among our country's counter-terrorism situation and through comparing developed country's private security's developing device. This summary of thesis is like below. First we need to establish total counter-terrorism center, like developed country on national corresponding strategy. Second, we need to make an organization as a country security department unified as an America's President directly belonging organization. Third, it is to legislate about an counter-terrorism. Fourth, we need to make a coorperate system according to counter-terrorism duty come under private management, so that can recover a trust among people. Fifth, a terror warning system is necessary. Private security's mutual relationship and developing devices is First, it is necessary to bring up counter-terrorism expert. Second, it is necessary to bring in counter-terrorism experts certification system. Third, counter-terrorism research center that come under private management is necessary. The university, private security related academy, should establish research center for the private security industry's specialization, subdivision. It is considered that various research need to be continued after by bringing up counter-terrorism experts, transforming a consciousness, counter-terrorism education, building an equipment and education center, not for a special group, that can minimize human infringement.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1C
• /
• pp.1-8
• /
• 2008

Recently, there have been many construction projects on soft ground with growth of industry and economy. Therefore foundation piles of abutments and(or) buildings had been suffering from a lot of stability problems of inordinary displacement due to lateral flow of soft ground. Although many researches about lateral flow have been carried out, it is still difficult to assess the mechanism of lateral flow in soft ground quantitatively. And reasonable design method for judgement of lateral flow occurrence in soft ground is not established yet. In this study, six PNN (Probabilistic Neural Network) models were developed according to input variables and database compiled from Korea and Japan for the judgment of lateral flow occurrence. PNN models were compared with present empirical methods. It was found that the developed PNN models can give more precise and reliable judgment of lateral flow occurrence than empirical methods.