• Communications of Mathematical Education
• /
• v.29 no.2
• /
• pp.197-214
• /
• 2015

This study is to design Flipped Learning classrooms of learner-centered education on the pre-service math teachers education. The study aims to explore the feasibility of teaching and learning method. To achieve the objectives of the study was to explore the teaching and learning model. Flipped learing classroom design includes a main step of a typical process of teaching system. And we designed the model based on the ADDIE Model. This model contains the design steps and the Flipped learning component of the teaching and learning design model. Designed classroom presented in three steps that are before classroom, during classroom and after classroom.

• Korean Journal of Child Studies
• /
• v.31 no.3
• /
• pp.235-254
• /
• 2010

The purpose of this study was to examine the feasibility and validity of the Application of Cognitive Function Scale as developed by Lidz and Jepsen (1997). Data were collected from 4 to 5-years-old children. The analysis for item adequacy indicated that the passing rate increases according to age. Futhermore the analysis for test adequacy indicated that internal consistency reliability was .85 in the pre-test and .80 of post-test in terms of the cognitive function scale, and .90 of pre-test and .93 in the post-test in relation to the behavior observation scale. In conclusion, our analysis of the ACFS shows sufficiently high scores in terms of both validity and reliability, so as to indicate that this test is an appropriate way to measure the cognitive function and non-intellective function of young Korean children.

• Transactions of the Korean hydrogen and new energy society
• /
• v.26 no.2
• /
• pp.156-163
• /
• 2015

The fuel cells have been investigated in the applications of marine as the high efficient and eco-friendly power generating systems. In this study, modeling of IR Type molten carbonate fuel cell (Internal Reforming Type molten carbonate fuel cell) has been developed to analyze the feasibility of thermal energy utilization. The model is developed under Aspen plus and used for the study of system performances over regarding fuel types. The simulation results show that the efficiency of MCFC system based on NG fuel is the highest. Also, it is also verified that the steam reforming is suitable as pre-reforming for diesel fuel.

• Korean Journal of Community Nutrition
• /
• v.27 no.4
• /
• pp.296-308
• /
• 2022

Objectives: This study aimed to develop evaluation criteria for the elementary-school-based health promotion program using the RE-AIM framework and to examine their feasibility. Methods: Previous evaluation studies on health interventions for elementary-school students using the RE-AIM framework were reviewed systematically to identify appropriate evaluation criteria. A diet and physical activity intervention based on the transtheoretical model was implemented in a pilot study using the "Happy Me" application. The feasibility of using the RE-AIM framework to evaluate it was examined. Results: The review yielded the following evaluation criteria: "reach," the ratio of participants out of the total target population; "efficacy/effectiveness," the difference in outcomes between the intervention and control groups, or between a pre- and post-test; "adoption," the rate of use of the program and participation in the next stage of the program; "implementation," the progress on the program components; "maintenance," the participants' and teachers' intention to continue using the program. The pilot study reached 76.6% of the targeted population. The intake of sugar-sweetened beverages decreased (P < 0.0001), and the duration of walking increased (P < 0.0001). Other indicators could not be evaluated; therefore, potential indicators were suggested. Conclusions: This study produced feasible evaluation criteria for elementary-school-based health promotion using the RE-AIM framework. Nevertheless, the feasibility needs to be validated with a broader range of studies and long-term interventions.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.19-26
• /
• 2003

In the face of the deterioration of tobacco manufacturing plant, we've got the plan for now manufacturing factory for the competitiveness, modernization, rationalization and environment. To achieve the goals, it was necessary to plan and investigate in the early stage of project. Consequently. We determined to introduce the CM in the early stage. We Performed the whole phase of CM services front the pre design phase services like feasibility analysis of site and building, plant master plan, selection of manufacturing facilities and drawing up the RFP, to maintenance management phase after the completion of a construction work. Contrary to the another CM projects, YongJu New Tobacco Manufacturing Plant CM organized the CM team with expert in field before the design development. This study analyze and evaluate the CM services of YongJu project which performed on the pre design phase. The purpose of this study is to emphasize the importance of pre design phase CM and support that CM services will start from the pre design phase.

• Nuclear Engineering and Technology
• /
• v.55 no.2
• /
• pp.530-545
• /
• 2023

As an alternative to conventional management options for a lot of concrete waste from decommissioning of nuclear power plants, a set of scenarios for controlled recycling of decommissioning concrete waste as engineered barriers of a radioactive waste repository was proposed, and a comprehensive safety assessment model and framework covering both pre-and post-closure phases was newly developed. The new methodology was applied to a reference vault-type repository, and the ratios of derived concentration limits to unconditional clearance levels of eighteen radionuclides for controlled recycling were provided for three sets of dose criteria (0.01, 1, and 20 mSv/y for the pre-closure and 0.01 mSv/y for the post-closure phases). It turns out that decommissioning concrete waste whose concentration is much higher than the unconditional clearance level can be recycled even when the dose criterion 0.01 mSv/y is applied. Moreover, a case study on ABWR bio-shield shows that the fraction of recyclable concrete waste increases significantly by increasing the dose criterion for the radiation worker in the pre-closure phase or the duration of storage prior to recycling. The results of this study are expected to contribute to demonstrating the feasibility of controlled recycling of a lot of decommissioning concrete waste within nuclear sectors.

• Journal of Distribution Science
• /
• v.16 no.2
• /
• pp.53-65
• /
• 2018

Purpose - The purpose of this study is to investigate the effect of gamma - irradiation on the effluent from food distribution in the large agricultural and marine products market. This study will contribute to the distribution process as well as the agricultural and fishery distribution facilities. Research design, data, and methodology - In order to reduce the odor, the smell was examined in the anaerobic digestion process by irradiating gamma rays to the wastewater of mixed food discharged from a large restaurant. An odor determination panel list was constructed to determine if the odor was present in the air dilution drainage and the odor concentration was analyzed by instrumental analysis. Results - It was confirmed that the sulfur content increased gradually from 3 months. Ammonia decreased from 33.57ppm at the initial measurement to 4.12 ppm at the end of the experiment. Methane production was highest at 100kGy when exposed to gamma rays of 0-200kGy at pH 12. In other words, it is considered that gamma irradiation doses are most effective at 100kGy and are suitable for large capacity wastewater treatment facilities in terms of economic feasibility. Conclusions - In pre-treatment of compound food wastewater, gamma irradiation is most cost effective when examined at 100kGy. The economic efficiency of the pre-treatment method by gamma irradiation is much higher than the wastewater treatment in the large-scale agricultural and marine products distribution market.

• Structural Monitoring and Maintenance
• /
• v.3 no.2
• /
• pp.145-155
• /
• 2016

The Pulse-Pre Pump Brillouin Optical Time Domain Analysis (PPP-BOTDA) technique is introduced to implement the multi-direction strain measurement. The monitoring principle is stated. The layout scheme of optical fibers is proposed. The temperature compensation formula and its realizing method are given. The experiments, under tensile load, combined bending and tensile load, are implemented to validate the feasibility of the proposed method. It is shown that the PPP-BOTDA technique can be used to discriminate the multi-direction strains with high spatial resolution and precision.

• Korean Journal of Construction Engineering and Management
• /
• v.8 no.2
• /
• pp.164-172
• /
• 2007

The development project usually aims to get a certain amount of return for its investment in land and capital. The success of such project is dependent on the accurate analysis of the feasibility and for casting. It is, however, very difficult to predict due to various environmental factors. For this, it is necessary to constitute a systematic and objective method of analysis. However, there is no method of analysis for numerous qualitative factors, such as legal, environmental, marketability. Moreover, conventional methods have some limitations because they are processed without all the scope of analysis items and any evaluation criteria. Therefore, this study will provide computerization model for feasibility study focusing on the apartment development project by a pre-sall method. This research does casestudies to assess the feasibility analysis by the computerization model and compares to the results of the conventional methods. It showed that the evaluation results for the qualitative analysis were proportional to actual sale result. This implies that qualitative subjective factors have high correlation with sale rate and sale prices.

• Journal of the Korean Society for Library and Information Science
• /
• v.56 no.4
• /
• pp.101-127
• /
• 2022

Article 31(1) of the Libraries Act(Act No. 18547), which was completely revised on December 7, 2021, stipulates that "the head of a local government or the superintendent of a city/provincial office of education must formulate a plan for the establishment and operation of a public library in advance and obtain the pre-evaluation of the feasibility of establishing a public library from the Minister of Culture, Sports and Tourism." Through the preliminary feasibility evaluation at the construction stage of the public library, it is possible to adjust distribution to improve the adequacy of scale and resolve regional imbalances and gaps. In addition, it is expected to increase service satisfaction and operational enhancement by inducing faithful securing of core infrastructure (librarians, collection, facilities, systems, etc.) in terms of balanced regional development and public library construction. The purpose of this study is to develop and present the basic direction and feasibility evaluation model for establishment of public libraries. The proposed evaluation model is expected to secure the legal basis and institutional legitimacy of the pre-evaluation system for public library establishment and to prevent waste of tax due to poor construction and operation of public libraries.