• 수산해양기술연구
• /
• 제52권4호
• /
• pp.325-338
• /
• 2016

Properties of aggregation and spatial distribution of fish were examined based on three lines in the South Sea of Korea using three frequencies (18, 38, and 120 kHz) of a scientific echosounder. The vertical distribution of fish was displayed using acoustic biomass namely nautical area scattering coefficient (NASC). As a result, at 120 kHz high NASC showed from water surface to 20 meters in deep while at 18 and 38 kHz very high NASC presented in 70 ~ 90 meters in depth, especially at line 3. Among three lines, the line 2 had lowest NASC. The horizontal distribution of fish using three frequencies together exhibited high NASC between the eastern South Sea and center of South Sea. In especial, NASC ($801{\sim}1,920m^2/n{\cdot}mile^2$) was observed along coastal waters from Busan to Tongyeong, Geoje, and Namhae. In regard with the property of aggregation of fish schools, the volume back-scattering strength ($S_V$) of three lines presented close each other, however, the range of $S_V$ in the line 2 was shortest (-53.5 ~ -43.4 dB). The average distributional depth was deep in the order of L3 ($32.8{\pm}9.0m$), L1 ($45.2{\pm}9.5m$), L2 ($49.7{\pm}5.6m$). The average altitude was high in the order of L3 ($13.4{\pm}10.3m$), L1 ($17.0{\pm}12.6m$), L2 ($56.7{\pm}5.6m$). The average length, thickness, and area were large in the order of L1, L3, and L2. This means that small sized fish schools were distributed near water surface in the line 2 while relatively large and similar sized fish aggregations between line 1 and line 3 appeared however, fish schools at line 3 had lower distributional depth and smaller compared to those at line 1. Acoustic data were visualized for demonstrating the entire circumstances of survey area. Additionally, there was no correlation between acoustic and trawl results.

• Clinics in Shoulder and Elbow
• /
• 제23권1호
• /
• pp.3-10
• /
• 2020

Background: The aim of this study was to evaluate clinical experience with arthroscopic debridement for septic arthritis of the shoulder joint and to report on our patient outcomes. Methods: The retrospective analysis included 36 shoulders (male:female, 15:21), contributed by 35 patients (mean age, 63.8 years) treated by arthroscopy for septic arthritis of the shoulder between November 2003 and February 2016. The mean follow-up period was 14.3 months (range, 12-33 months). An additional posterolateral portal and a 70° arthroscope was used to access the posteroinferior glenohumeral (GH) joint and posteroinferior subacromial (SA) space, respectively. Irrigation was performed with a large volume of fluid (25.1±8.1 L). Multiple suction drains (average, 3.3 drains) were inserted into the GH joint and SA space and removed 8.9±4.3 days after surgery. Intravenous antibiotics were administered for 3.9±1.8 weeks after surgery, followed by oral antibiotic treatment for another 3.6±1.9 weeks. Results: Among the 36 shoulders, reoperation was required in two cases (5.6%). The average range of motion achieved was 150.0° for forward flexion and T9 for internal rotation. The mean simple shoulder test score was 7.9±3.6 points. Nineteen shoulders (52.8%) had acupuncture or injection history prior to the infection. Pathogens were identified in 15 shoulders, with Staphylococcus aureus being the most commonly identified pathogen (10/15). Both the GH joint and the SA space were involved in 21 shoulders, while 14 cases involved only the GH joint and one case involved only the SA space. Conclusions: Complete debridement using an additional posterolateral portal and 70° arthroscope, a large volume of irrigation with >20 L of saline, and multiple suction drains may reduce the reoperation rate.

• International Journal of Computer Science & Network Security
• /
• 제22권4호
• /
• pp.67-72
• /
• 2022

The main purpose of the study is to analyze the main aspects of state regulation of the banking business in the context of social and digital transformation. One of the key elements of the functioning of the economy of any country are banks that ensure the redistribution of financial resources and stimulate economic growth. However, the banking sector, like other activities, is dynamic and depends on the pace of development and forms of technological progress that affect the forms and types of information and digital technologies, as well as the globalization and remoteness of banking services. Accordingly, the need for effective implementation of the latest technologies becomes relevant, which will not only help increase consumer satisfaction with the banking product, but also ensure the development of the country's financial sector. As a result of the study, trends in the development of state regulation of the banking sector in the digital economy were identified.

• 동력기계공학회지
• /
• 제16권2호
• /
• pp.11-16
• /
• 2012

In this paper, the authors formulate the sensitivity analysis algorithm for the natural frequency of a torsional shafting by expanding the transfer stiffness coefficient method. The basic concept of the present algorithm is based on the transfer of sensitivity stiffness coefficient, which is the derivative of stiffness coefficient with respect to design parameter, at every node from the first node to the last node in analytical model. The effectiveness of the present algorithm is confirmed by comparing the results of the sensitivity analysis and those of the reanalysis for the natural frequencies of a torsional shafting with a constant cross section. In numerical calculation, the design parameter is the diameter of the shaft element of the torsional shafting.

• 동력기계공학회지
• /
• 제21권5호
• /
• pp.48-54
• /
• 2017

The transfer influence coefficient method which is an vibration analysis algorithm based on the transfer of influence coefficient is applied to the free vibration analysis of double cylindrical shells. After the computational programs for the free vibration analysis of double cylindrical shells were made using the transfer influence coefficient method and the transfer matrix method, we compared the results using the transfer influence coefficient method with those by the transfer matrix method. The transfer influence coefficient method provided the good computational results in the free vibration analysis of double cylindrical shells. In particular, The results of the transfer influence coefficient method are superior to those of the transfer matrix method when the stiffness of internal springs connecting a inside cylindrical shell and a outside cylindrical shell is very large.

• 동력기계공학회지
• /
• 제17권6호
• /
• pp.33-39
• /
• 2013

It is very important to analyze the dynamic responses of the shell structures from the viewpoint of the design of shell structures with a variety of axisymmetric loadings. In this paper, the computational algorithm for the dynamic response analysis of an cylindrical shell with axisymmetric loading is formulated by the transfer mass coefficient method based on the transfer of mass coefficient. After the computational programs for obtaining the dynamic responses of cylindrical shells with axisymmetric loading are made by the transfer mass coefficient method and the finite element method, the computational results by both methods are compared. From the computational results, we can confirm that the transfer mass coefficient method has the effectiveness in the dynamic response analyses of cylindrical shells with a variety of axisymmetric loadings.

• 시큐리티연구
• /
• 제39호
• /
• pp.295-317
• /
• 2014

주요 선진국에서 민간조사제도는 민간경비업의 하나로 보편화되어 있고 국내에서도 민간조사제도의 필요성은 끊임없이 제기되고 있지만 아직까지 입법화 되지 못하여 불법적으로 운영되는 심부름센터는 그 수요에 따라 업무영역이 세분화되어 증가하고 있다. 이것은 경찰과 민간경비 모두 국민의 치안수요를 만족시키고 있지 못하고 있다는 반증인데 경찰은 수사, 교통, 정보, 방범과 같은 본연의 업무가 있고, 민간경비는 "경비업법"에 따라 시설경비, 호송경비, 신변보호, 기계경비, 특수경비로 업무 영역이 한정되어 있기 때문이다. 이 연구에서는 국내 민간경비 시장에 민간조사업의 접근에 따른 구조적 차이에 대하여 살펴보고자 하였고 이와 같은 질문에 민간경비업과 민간조사업은 매우 다르다(71.2%), 다르다(22.4%), 보통(6.3%), 비슷하다(0.0%), 매우 비슷하다(0.0%)순으로 응답하여 대체적으로 다른 업무로 인식하고 있는 것으로 나타났으며, 비수량분석 결과 그 차이는 업무성격, 비용, 업무수행범위, 공권력 영역, 법제의 유무, 위협대상, 조직규모인 것으로 나타났다. 국내에서 민간조사제도 도입을 위한 노력은 지난 1999년 하순봉의원의 발의 이후 현재 윤재옥의원의 "경비업법전부개정안"과 송영근의원의 "민간조사업에 관한 법률안"이 국회에 계류 중이다. 이 연구결과는 윤재옥의원의 "경비업법전부개정안" 법안과 같이 "경비업법"을 개정하여 민간조사업을 도입할 경우 민간경비업과 민간조사업의 차이점을 탐색적으로 살펴보고 정책적 제언을 하고자 한다.

• 한국ITS학회 논문지
• /
• 제21권1호
• /
• pp.182-192
• /
• 2022

이륜차 전체 사고는 연평균 10.01% 증가하며, 사망자 수 또한 2.64% 증가하는 추세이다. 사륜차의 경우 도로에서 안전 운전을 강제할 수 있도록 단속 카메라가 설치되어있다. 그러나 이 단속 카메라는 사륜차 단속이 주목적이기 때문에 이륜차 단속 기능을 기대할 수 없다. 이륜차 단속은 현장 인력 투입을 통한 현장 단속에 의존할 수밖에 없다. 최근 이륜차 위법 행위 단속을 위해 경찰청에서는 '경찰청 SMART 국민제보'를 통한 이륜차 위법 행위를 국민 신고를 통해 수행 중이나 장기 지속되기 어렵다. 인력을 지속적으로 투입해야하는 유인 단속의 효과를 극대화 시킬 수 있는 적절한 단속 방안의 마련이 필요하다. 본 연구를 통해 배달 이륜차 라이더를 관리할 수 있도록 하는 제도적 장치인 배달 이륜차 라이더 자격증 ID 4종을 제안하였다. 또한, 배달 이륜차 자격증 ID 체계를 활용한 단속 실험을 수행하여 배달 이륜차 라이더 자격증 단속이 가능 여부를 D-MESO 프로그램을 통해 확인하였다.

• 동력기계공학회지
• /
• 제21권1호
• /
• pp.37-42
• /
• 2017

A curved beam is one of the basic and important structural elements in structural design. In this paper, the authors formulated the computational algorithm for analyzing the free vibration of curved beams using the finite element-transfer stiffness coefficient method. The concept of the finite element-transfer stiffness coefficient method is the combination of the modeling technique of the finite element method and the transfer technique of the transfer stiffness coefficient method. And, we confirm the effectiveness the finite element-transfer stiffness coefficient method from the free vibration analysis of two numerical models which are a semicircle beam and a quarter circle beam.

• 동력기계공학회지
• /
• 제17권2호
• /
• pp.46-55
• /
• 2013

In this paper, the computational algorithm for free vibration analysis of an axisymmetric cylindrical shell is formulated by the Sylvester-transfer stiffness coefficient method (S-TSCM) which combines the Sylvester's inertia theorem and the transfer stiffness coefficient method. After the computational programs for obtaining the natural frequencies and natural modes of the axisymmetric cylindrical shell are made by the S-TSCM and the finite element method (FEM), the computational results which are natural frequencies, natural modes, and computational times by both methods are compared. From the computational results, we can confirm that S-TSCM has the reliability in the free vibration analysis of the axisymmetric cylindrical shell and is superior to FEM in the viewpoint of computational times.