• Journal of the Korean Orthopaedic Association
• /
• v.56 no.3
• /
• pp.215-223
• /
• 2021

Purpose: Distal radius fractures in youth are treated conservatively in most cases, but there are some cases of redisplacement in the follow-up period after cast immobilization, even after complete reduction. This study examined the risk factors of redisplacement in reduced unstable distal radius fractures. Materials and Methods: From February 2011 to June 2018, 44 unstable distal radius fractures were managed with a closed reduction and cast immobilization. The patients were aged between 6 and 14 years. The cases of redisplacement were analyzed with the fracture characteristics (fracture obliquity, fracture level ratio, ulnar fracture combined), cast qualities (gap index, cast index, 3 point index, and radius-2nd metacarpal angle) and host factors (age, sex). Results: The mean angulation in the union was 9.2° (0°-32.8°). In the categorical grouping 29 cases were within 10° angulation, and 15 cases were more than 10°. No significant differences in the factors of the cast indices or host factors were noted. The meaningful factor was the fracture level calculated by the relative width of the fracture site divided by the sum of width of diaphysis and epiphysis (p=0.001) and combined ulnar fracture (p=0.019). Conclusion: Unstable distal radius fractures should be treated with more stubborn guidelines lest the fracture loses its anatomical alignment. In particular, in patients with less remodeling power, operative treatment would secure a better result if the fracture occurs in a more proximal location.

• Journal of Animal Science and Technology
• /
• v.64 no.3
• /
• pp.471-480
• /
• 2022

This experiment was conducted to determine the maximum dietary energy levels on growth performance and carcass characteristics of White Pekin duck. the Six dietary treatments were formulated based on their apparent metabolizable energy (AME) concentrations from 2,700 to 3,200 kcal/kg with a 100 kcal/kg gap to evaluate the accurate dietary AME requirement to address current knowledge and further issues for fulfilling the genetic potential of meat-type white Pekin ducklings. A total of 432 one-day-old male White Pekin ducklings were randomly allocated into one of six dietary treatments with six replicates (12 birds per pen). The diets were formulated as corn-soybean meal-based diets to meet or exceed the Nutrient Requirement of Poultry specification for meat-type ducks. Growth performance indices (i.e. average daily gain [ADG], average daily feed intake, feed conversion ratio) were measured weekly. Medium body weight (BW) ducklings from each pen were sacrificed to analyze the carcass traits and abdominal fat content on day 21. Obtained data were analyzed to estimate significant effect using the one-way ANOVA of IBM SPSS Statistics (Version, 25). If the p-value of the results were significant, differences in means among treatments were separated by Tukey's post hoc test. Significant differences were then analyzed with a linear and quadratic broken model to estimate the accurate concentration of AME. Ducklings fed higher dietary AME diets increased (p < 0.05) BW, ADG. Ducklings fed higher AME than 2,900 kcal/kg diets increased abdominal fat accumulation and leg meat portion. The estimated requirement by linear plateau method showed from 3,000.00 kcal/kg to 3,173.03 kcal/kg whereas the requirement by quadratic plateau method indicated from 3,100.00 kcal/kg to 3,306.26 kcal/kg. Collectively, estimated dietary requirements exhibit diverse results based on the measured traits and analysis methods. All the estimated requirements in this experiment present higher than previous research, the maximum requirement for the next diet formulation should be selected by the purpose of the diet.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.4
• /
• pp.443-451
• /
• 2010

This paper describes a fully integrated CMOS low-IF mobile-TV RF tuner for Band-III T-DMB/DAB applications. All functional blocks such as low noise amplifier, mixers, variable gain amplifiers, channel filter, phase locked loop, voltage controlled oscillator and PLL loop filter are integrated. The gain of LNA can be controlled from -10 dB to +15 dB with 4-step resolutions. This provides a high signal-to-noise ratio and high linearity performance at a certain power level of RF input because LNA has a small gain variance. For further improving the linearity and noise performance we have proposed the RF VGA exploiting Schmoock's technique and the mixer with current bleeding, which injects directly the charges to the transconductance stage. The chip is fabricated in a 0.18 um mixed signal CMOS process. The measured gain range of the receiver is -25~+88 dB, the overall noise figure(NF) is 4.02~5.13 dB over the whole T-DMB band of 174~240 MHz, and the measured IIP3 is +2.3 dBm at low gain mode. The tuner rejects the image signal over maximum 63.4 dB. The power consumption is 54 mW at 1.8 V supply voltage. The chip area is $3.0{\times}2.5mm^2$.

• Solar Energy
• /
• v.12 no.3
• /
• pp.10-20
• /
• 1992

In this experiment, photochemical reaction has been applied to destroy TCE in water phase. The main target of this work is to investigate the technical feasibility of large scale of solar detoxification reactor for water treatment. The results have revealed that solar detoxification utilizing photon energy from the sun is the most attractive process to decompose organic toxins in water phase at room temperature. The detailed results from this work are as follows; (1) The highest conversion ratio of TCE was obtained by using $TiO_2$, annatase as a photocatalyst among $TiO_2$ anatase, $TiO_2$ rutile and $V_2O_5$ under the same experimental condition. The anatase crystal structure was confirmed with XRD analysis, and its surface area was 7.748 $m^2/g$ from the BET-$N_2$ measurement (2) 0.1 wt% of $TiO_2$ anatase has been adopted as optimal quantity for batch slurry reactor at this experimental conditions. (3) The effect of hydrogen peroxide on the conversion of TCE was investigated. Its optimal quantity was 0.06 vol. % under this experimental conditions. (4) The effect of oxygen on the conversion of TCE also was studied by controlling the head space in photoreactor. Results indicated that sufficient amount of oxygen should be supplied to accomplish the highest conversion rate of TCE in water phase.

• Korean Journal of Soil Science and Fertilizer
• /
• v.9 no.3
• /
• pp.183-199
• /
• 1976

1. The cultivated land in Korea has originally low fertility resulting in high dependence to fertilizers. 2. The total fertilizer requirement calculated by the Office of Rural Development (ORD) in 1976 was about 1,153 thousand mts, and the total amount of supply planned by the Ministry of Agriculture and Fishery was 1,010 thoushand mts which is close to the amount calculated by ORD. However, there is some gap between the amount of recommended (N, 11.6; $P_2O_5$: $K_2O$, 7.3kg/10a> and supply planned (N, 12.0; $P_2O_5$, 6.3; $K_2O$. 4.8kg/10a) fertilizers for each elements per unit area 3. For 15 years from 1960 to 1975 the fertilizer consumption of nitrogen was roughly increased from 200,000 mts to 500,000 mts; phosphorus, from 50,000 to 250,000 mts; potassium, from 10, 000 to 170,000 mts; accounting 2.5, 5, and 17 times of increase respectively. 4. The total fertilizer consumption for 5 years from 1967 to 1971 was about 100,000 mts and another 5years from 1971 to 1975 was 300,000 mts indicating three times increase. 5. The direct factors influenced to the increase of fertilizer consumption in recent years are 1) the dissemination of high yielding Tongil type rice varieties which are resistant to heavy fertilization 2) high price policy for agricaltural products 3) increased cultivation of vegetables:, fruits, and forages which require high level of fertilizers. The indirect factors are 1) dissemination of new improved agricultural techniques, 2, improvement of cultivated land conditions through irrigation system and land reform, 3) increased supply of silicate fertilizers, and 4) increase of farm income. 6. The percentage of total fertilizer consumption by rice (32%) and barley (25%) is about 57%. The ratio of total fertilizer consumption by vegetables and forages is expected to increase greatly. 7. Based on the increasing tendency of cultivated land and yield per unit area for last 10 years in each crop, total fertilizer consumptions in 1980, 1990, and 2000 year are estimated to 1,290,000, 1,580,000 and 1,870,000 mts respectively.

• Transactions of the Korean hydrogen and new energy society
• /
• v.26 no.5
• /
• pp.423-430
• /
• 2015

$Cu/ZnO/Al_2O_3$ catalysts for water gas shift (WGS) reaction were synthesized by co-precipitation method with the fixed molar ratio of Cu/Zn/Al precursors as 45/45/10. Copper and zinc precursor were added into sodium carbonate solution for precipitation and aged for 24h. During the aging period, aluminum precursor was added into the aging solution with different time gap from the precipitation starting point: 6h, 12h, and 18h. The resulting catalysts were characterized with SEM, XRD, BET surface measurement, $N_2O$ chemisorption, TPR, and $NH_3$-TPD analysis. The catalytic activity tests were carried out at a GHSV of $27,986h^{-1}$ and a temperature range of 200 to $400^{\circ}C$. The catalyst morphology and crystalline structures were not affected by aluminum precursor addition time. The Cu dispersion degree, surface area, and pore diameter depended on the aging time of Cu-Zn precipitate without the presence of $Al_2O_3$ precursor. Also, the interaction between the active substance and $Al_2O_3$ became more stronger as aging duration, with Al precursor presented in the solution, increased. Therefore, it was confirmed that aluminum precursor addition time affected the catalytic characteristics and their catalytic activities.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.1
• /
• pp.103-107
• /
• 2000

Traditionally, EPT and thermal tests were used as diagnostic methods for pulp vitality test. The thermal and electrical stimulation tests are the methods to determine the vitality of a tooth based on its neuronal response. These have certain limitations, one of them is the difficulty of approaching the correct result in case of treatment of children. The reason is management problem caused by the unpleasant stimulation. Also, the response from patients are not objective, and false positive or false negative could be happened. Recently, laser doppler flowmetry and pulse oximeter which evaluate vascular integrity are introduced in an effort of overcoming to limitation of traditional methods. The principle of pulse oximeter is to and out level of oxygen saturation by ratio of the two pulses between emitted light and detected light penetrating them to the termination of body, such as ears or fingers. From this point of view, it can be applied to a tooth to determine its vitality. The objective of this study lies mainly on varifying pulse oximeter as a method of determining tooth vitality and providing basic data of its clinical implementation. The result of the research showed that level of oxygen saturation in vital teeth was average of 96.3% and 0.0% in pulpless teeth. As a comprehensive result, pulse oximeter could be an useful diagnostic equipment in determining of tooth vitality.

• Applied Chemistry for Engineering
• /
• v.24 no.5
• /
• pp.537-543
• /
• 2013

In this study, the push-pull structure polymer for organic photo voHaics (OPVs) was synthesized and characterized. The poly{4,8-didodecyloxybenzo[1,2-b;3,4-b]dithiophene-alt-5,6-bis(octyloxy)-4,7-di(thiophen-2-yl)benzo[c][1,2,5]-thiadiazole} (PDBDT-TBTD) was synthesized by Stille coupling reaction using the benzothiadiazole (BTD) derivative as an electron acceptor and benzodithiophene (BDT) derivative as an electron donor. The structure of monomers and polymers was identified by $^1H-NMR$ and GC-MS. The optical, physical and electrochemical properties of the conjugated polymer were identified by GPC, TGA, UV-Vis and cyclic voltammetry. The number average molecular weight ($M_n$) and initial decomposition temperature (5% weight loss temperature, $T_d$) of PDBDT-TBTD were 6200 and $323^{\circ}C$, respectively. The absorption maxima on the film was about 599 nm and the optical band gap was about 1.70 eV. The structure of device was ITO/PEDOT : PSS/PDBDT-TBTD : $PC_{71}BM/BaF_2/Ba/Al$. PDBDT-TBTD and $PC_{71}BM$ were blended with the weight ratio of 1:2 which were then used as an optical active layer. The power conversion efficiency (PCE) of fabricated device was measured by solar simulator and the best PCE was 2.1%.

• Journal of Korean Society of Forest Science
• /
• v.95 no.3
• /
• pp.342-349
• /
• 2006

The survey guideline of forest products statistics suggests a certain type of standard to aggregate production amount of each item such as dry bracken, raw dates, cracked nuts, It does not, however, give any information about transition ratios, which would apply to convert weights of fresh bracken into dry one, or cracked nuts into the non-cracked. This has been one of the main factors which would make the statistics unreliable. The purpose of this study is to examine the aggregation realities and to put forward some proposals to improve forest products statistics with transition ratios. Targets of this study are 10 forest products that are strongly related to the mentioned problems. With the calculated transition ratios and some assumptions the changing rate of the official statistics of 2004 production amounts ranged from -41% to 474% for the 10 subjects. The suggested figures for transitions are based only on one-year analysis results. Therefore more periods are required to improve the accuracy and the reliability, and this study would be a good starting point.

• Korean Journal of Optics and Photonics
• /
• v.32 no.2
• /
• pp.49-54
• /
• 2021

In this paper, we design and construct the equipment to manufacture large-diameter optical fiber end caps, which are the core parts of high-power fiber lasers, and we fabricate large-diameter optical fiber end caps using the home-made equipment. This equipment consists of a CO2 laser as a fusion-splice heat source, a precision stage assembly for transferring the position of a large-diameter optical fiber and an end cap, and a vision system used for alignment when the fusion splice is interlocked with the stage assembly. The output of the laser source is interlocked with the stage assembly to control the output, and the equipment is manufactured to align the polarization axis of the large-diameter polarization-maintaining optical fiber with the vision system. Optical fiber end caps were manufactured by laser fusion splicing of a large-diameter polarization-maintaining optical fiber with a clad diameter of 400 ㎛ and an end cap of 10×5×2 ㎣ (W×D×H) using home-made equipment. Signal-light insertion loss, polarization extinction ratio, and beam quality M2 of the fabricated large-diameter optical fiber end caps were measured to be 0.6%, 16.7 dB, and 1.21, respectively.