• Food Quality and Culture
• /
• 제3권2호
• /
• pp.53-58
• /
• 2009

This study was conducted to investigate the quality characteristics of frozen stored mungbean starch gels added with sucrose fatty acid ester (SE). The study showed a delay of gelatinization of mungbean starch by SE addition through the measurements conducted by using Rapid Visco Analyzer (RVA) and Differential Scanning Calorimeter (DSC). In the color of SE added frozen stored gels, lightness (L) and yellowness (b) values were increased compared to those of values measured from freshly prepared gel, whereas redness (a) value was decreased. The addition of 1% SE on mungbean starch gel prevented the color change during frozen storage. Rupture stress and rupture energy of frozen stored gel was higher than those of freshly prepared gel, whereas rupture strain of frozen stored gel was lower than that of freshly prepared gel. The addition of 1% SE on mungbean starch gel prevented the change of rupture characteristics during frozen storage. Texture profile analysis(TPA) characteristics revealed a significant change of the gel texture during frozen storage by showing an increase of hardness of the frozen stored gels compared to the freshly prepared gels with newly discovered fracturability, which resulted to show a large difference of gel texture by showing the disappearance of adhesiveness and large reduction of cohesivenes. The addition of 1% SE on mungbean starch gel prevented the change of TPA characteristics during frozen storage. Scanning electron micrographs showed that network structure of frozen stored gel was more rough than that of freshly prepared gel, and the addition of 1% SE on mungbean starch gel could suppress the breakdown of network structure. Thus the addition of 1.0% SE on mungbean starch gel was appropriate method for remaining gel characteristics during frozen storage.

• 한국정밀공학회지
• /
• 제15권10호
• /
• pp.120-127
• /
• 1998

In this study the dynamic characteristics of automatic transmission system due to the change of the planetary gear ratio is studied. To study the power flow and shift quality for power transmission the simulation program is developed using the modeling and analysis technique. The results from this study will be used in designing the basic structure of automatic transmission using planetary gear system.

• 한국산학기술학회논문지
• /
• 제6권1호
• /
• pp.72-77
• /
• 2005

본 연구에서는 점토퇴적지반의 투수특성을 실험적으로 연구하기 위하여 표준압밀시험, 일정변형률압밀시험 등을 수행하였다. 시험결과를 분석하여 비등방성, 투수변화지수, 간극비와의 관계 및 투수계수에 영향을 미치는 다양한 영향요소에 관하여 고찰하였으며, 대표투수계수를 제안하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 추계학술대회
• /
• pp.131-132
• /
• 2018

The world market for BESS (Battery Energy Storage System) is growing rapidly, and battery technology is also developing. It is important to understand the battery characteristics and develop a control strategy to develop the optimal BMS (Battery Management System). In this paper, we compare and analyze the parameter characteristics of NCM LIB (Lithium Ion Battery) according to the temperature change.

• 환경영향평가
• /
• 제22권3호
• /
• pp.195-201
• /
• 2013

Local governments are establishing their own greenhouse gas reduction goal and are playing a important role to respond to climatic changes. However, there are difficulties in quantitative analyses such as estimation of future greenhouse gas emission and computation of reduction potential, which are procedures required to establish mid to long term strategies to realize of low carbon society by each local governments. Also, reduction measures must reflect characteristics of each local government, since the reduction power of each local government can differ according to characteristics of each. In order to establish strategies that reflect characteristics of local governments, types of greenhouse gas emission from cities were classified largely into residential city, commercial city, residential commercial city, agriculture and fishery city, convergence city, and industrial city. As a result of analyzing basic unit of greenhouse gas emission by local government during 2007 in terms of per population, household and GRDP based on the type classification, significant results were deduced for each type. To manage the amount of the national greenhouse gas, reduction measures should be focused on the local governments that emits more than the average of each type's GHG emission.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1996년도 가을 학술발표회 논문집
• /
• pp.131-137
• /
• 1996

To perform condition monitoring of P.C. Box girder bridge under ambient traffic, dynamic characteristics were identified using the results of load test an analysis. It was found that natural frequencies obtained from the measured acceleration data for the forced vibration part and free vibration part were nearly identical. Thus it can be concluded that dynamic parameters are properly determined under ambient traffic condition. Finite element model for analysis was calibrated using measured frequencies. Change of dynamic characteristics were predicted through analysis of the established finite element model with anticipated change.

• 한국가정과교육학회지
• /
• 제34권3호
• /
• pp.67-83
• /
• 2022

본 연구는 중학교 가정과 의생활영역의 지속가능발전교육(ESD)을 통해 청소년이 주변의 문제를 발견하고 공동체를 위해 해결방법을 고민하며 실천하는 사람으로서의 자질을 함양할 수 있는지 프로그램을 개발하고 그 효과를 분석하는 데 목적이 있다. 연구방법은 ADDIE의 교수설계 모형에 따라 진행하였다. 이를 위해 중학교 가정 교과서 의생활영역 학습활동을 분석하였고, 분석 결과를 바탕으로 체인지메이커 교육프로그램 단계에 따른 지속가능발전교육 프로그램을 개발한 후 그 효과를 평가하였다. 먼저 아쇼카 재단이 제시한 Change-maker 교육프로그램의 단계에 따라 중학교 가정 교과서의 학습활동을 분석하였고 분석결과를 바탕으로 10개의 교수·학습과정계획서, 17개의 개별 학습 활동지 7개의 모둠 학습 활동지 등 '우리를 위한 옷, 지구를 위한 행동'이라는 제목의 지속가능한 의생활교육 프로그램을 개발하였다. 개발된 프로그램은 울산의 K 중학교 1학년 학생 285명을 대상으로 수업에 적용되었다. 개발된 프로그램을 수업에 적용한 결과 연구대상자의 체인지메이커 자질 수준이 수업 전 평균 3.87(SD=.54)에서 수업 후 평균 4.59(SD=.64)로 증가하였으며, 수업 참여 학생들의 성찰일지에서도 사회문제 해결의 가치와 지속가능발전(SD)을 위한 행동 변화의 필요성을 깨닫는데 영향을 준 것으로 나타났다. 따라서 Change-maker 교육 프로그램 단계를 기반으로 개발된 중학교 가정과 의생활영역 지속가능발전교육 프로그램은 청소년의 Change-maker 자질 함양에 효과적인 것으로 확인되었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.483-484
• /
• 2008

In this paper, we present high-temperature characteristics of tunable all-optic filter using fiber Bragg grating(FBG), including peak reflectivity, FWHM bandwidth, refractive index change along temperature variation. The characteristics of a FBG tunable filter with refractive index change is affected by its thermal stability.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권1호
• /
• pp.131-137
• /
• 2009

In this paper, we have manufactured hole type PRAM unit cell using phase change material $Ge_2Sb_2Te_5$. The phase change material $Ge_2Sb_2Te_5$ was deposited on hole of 500 nm size using sputtering method. Reset current of PRAM unit cell was confirmed by measuring R-V characteristic curve. Reset current of manufactured hole type PRAM unit cell is 15 mA, 100 ns. And electro and thermal characteristics of hole type PRAM unit cell were analyzed by 3-D finite element analysis. From simulation temperature of PRAM unit cell was $705^{\circ}C$.

• 상하수도학회지
• /
• 제20권1호
• /
• pp.147-155
• /
• 2006

For the further study of the solids flux theory, several researchers have proposed models to predict sludge settling velocity for each different concentration by using sludge indexes, SVI, SSVI and $SSVI_{3.5}$. It is difficult to apply the above models to predict sludge-water interface height in a batch column because sludge settling velocity changes while sludge settle down. While sludge settle down in a batch column, sludge concentration becomes high. The sludge concentration change is one of the most critical causes of the change of sludge settling velocity. Also, sludge concentration change causes of sludge index to change. SVI is more sensitive than SSVI or $SSVI_{3.5}$ to the change of sludge concentration. Each sludge has physical characteristics of its own which makes the settling velocity for each sludge different. The purpose of this study is to establish the correction factors that are able to compensate the errors derived from each different sludge settling characteristic by using sludge indexes, therefore the correction factors are applicable to the model for the change of sludge-water interface height.