• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.603-606
• /
• 2002

This paper introduces a control algorithm for 3-phase 4-wire series active power filter This control algorithm compensates harmonics and neutral line currents which are generated by balanced or unbalanced nonlinear loads. The advantage of this control algorithm is direct extraction of compensation voltage references. Therefor calculation time is shorten and the performance of series active power filter is improved. Compensation principle of the proposed control algorithm is presented in detail. Experimental results are shown to verify the effectiveness of tile proposed control algorithm.

• 유체기계공업학회:학술대회논문집
• /
• 2005.12a
• /
• pp.601-606
• /
• 2005

This research presents a modeling and a manufacturing method of screw flow meter. This paper introduces the efficient design and manufacturing method of screw type flow meter using reverse engineering and test technology. The methods introduced this paper utilize the reverse engineering that is increasing accuracy of modeling and manufacturing of reverse model. And then it can be used in performance test with hydraulic test equipment. Hence this can be used in the basic document for development of the quite accurate flowmeter.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.5
• /
• pp.606-613
• /
• 2011

In this paper, patterns of laser scattering and detection of micro defects have been investigated based on Rayleigh criterion for silicon wafer in solar cell. Also, a new laser scattering mechanism is designed using characteristics of light scattering against silicon wafer surfaces. Its parameters are to be optimally selected to obtain effective and featured patterns of laser scattering. The optimal parametric ranges of laser scattering are determined using the mean intensity of laser scattering. Scattering patterns of micro defects are investigated at the extracted parameter region. Among a lot of pattern features, both maximum connected area and number of connected component in patterns of laser scattering are regarded as the important information for detecting micro defects. Their usefulness is verified in the experiment.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.428-428
• /
• 2013

Red color light emitting diodes were fabricated using CdSe/CdS/ZnS quantum dots (QDs). Patterned indium-tin-oxide (ITO) was used as a transparent anode, and oxygen plasma treatment on a surface of ITO was performed. Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) was spin coated on the ITO surface as a hole injection layer. Then CdSe/CdS/ZnS QDs was spin coated and thermal treatment was performed for the cross-linking of QDs. TiO2 was coated on the QDs as an electron transport layer, and 150 nm of aluminum cathode was formed using thermal evaporator and shadow mask. The device shows a pure red color emission at 606 nm wavelength. Device characteristics will be presented in detail.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.606-610
• /
• 2003

The 200 class insulation system which adopted to traction motor have excellent dielectric strength but weaken to thermal stress therefore deterioration phenomena analysis according to thermal stress is necessary. Accelerated thermal aging tests have been used to determine thermal reliability of stator coils used as traction motor in electric multiple unit. The conventional aging test is carried on according to IEC 60034-18-31 and IEEE Std. 275-1992. Variation in insulation resistance, P.I, capacitance, dielectric loss($tan{\delta}$) and partial discharge are measured during the aging cycle. Sample coils for traction motor were tested by accelerated aging test which composed of heat, vibration and moisture. Reliability and expected life were evaluated on the insulation system for traction motor.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.12
• /
• pp.606-610
• /
• 2006

We investigated the output characteristics of Nd:YAG lasers at wavelength of 1444 nm, which were pumped by 450 Xe-flashlamp, 700 torr Xe-flashlamp and 700 torr Kr-flashlamp. With a Xe-flashlamp of 700 torr of gas pressure, the pulse energy of 0.738 J was obtained with repetition rate of 9.16 Hz and pumping pulse width of 400 ms. In case pumping pulse width of 5 ms and repetition rate of 1 Hz, 700 torr Kr-flashlamp showed the highest pulse energy of 1.44 J.

• The Journal of the Korean dental association
• /
• v.57 no.10
• /
• pp.606-612
• /
• 2019

Antiplatelet agent is administered to the patients who have ischemic heart disease, transient cerebral infarction, as well as hypertension, etc. Antiplatelet agent prevents thromboembolism by inhibition of platelet aggregation by various mechanism. Due to that reason, patient who administered antiplatelet agent has bleeding tendency. Surgeon does not want to make a complication by bleeding during and after operation, and want to stop taking antiplatelet agent. However, It is very dangerous for the patient to stop antiplatelet agent. Local bleeding as a complication after operation is considered minor one, whereas thromboembolism is life threatening serious complication. Most dental intervention can be performed without withdrawal of antiplatelet agent. Dental intervention should be limited area, and surgeon should do active bleeding control.

• BMB Reports
• /
• v.49 no.11
• /
• pp.598-606
• /
• 2016

ARF is an alternative reading frame product of the INK4a/ARF locus, inactivated in numerous human cancers. ARF is a key regulator of cellular senescence, an irreversible cell growth arrest that suppresses tumor cell growth. It functions by sequestering MDM2 (a p53 E3 ligase) in the nucleolus, thus activating p53. Besides MDM2, ARF has numerous other interacting partners that induce either cellular senescence or apoptosis in a p53-independent manner. This further complicates the dynamics of the ARF network. Expression of ARF is frequently disrupted in human cancers, mainly due to epigenetic and transcriptional regulation. Vigorous studies on various transcription factors that either positively or negatively regulate ARF transcription have been carried out. However, recent focus on posttranslational modifications, particularly ubiquitination, indicates wider dynamic controls of ARF than previously known. In this review, we discuss the role and dynamic regulation of ARF in senescence and cancer.

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.604-606
• /
• 1992

Many Industrial applications require high facultied and high efficiency motor drives. Recently, as such motor driving system, switched reluctance motor ( S R M ) drives are proposed. This paper describes the design features, drive circuits, and performance of 6/4 S R M for high efficiency variable speed drives. The main advantages of these motors lie In high efficiency, simple driving circuitry, and low manufacturing cost. The prototypes have been built and tested, showing satisfactory performance.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.603-606
• /
• 2004

Aspects of PD occurrence from PD sources are different with their physical and structural appearances which cause the variation of electric field distributions of them. This paper have investigated electric field distributions of some kinds of electrode structure by FEM applied analysis program. Numeric analysis is a good method to investigate Ihe electric and magnetic field distribution of partial discharge source. The analysis results were confirmed by real PD occurring situation in the laboratory.