• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.5
• /
• pp.105-112
• /
• 2011

Delay reduction of vehicles at the intersection is highly dependent on the signal operation method. Improper traffic operation causes the violation of the traffic regulations and increasing traffic congestion. Delay because of congestion has contributed to the increase in carbon dioxide in the atmosphere. The focus of this paper is to measure the amount of carbon dioxide when the intersection is changed to roundabout. Even though, Intergovernmental Panel on Climate Change(IPCC) recommends Tier 1 method to measure the amount of greenhouse gas from vehicles, this paper used Tier 3 method because we could use the data of average running distance per each vehicle model. Two signalized intersections were selected as the study area and the delay reductions of roundabout operation were estimated by VISSIM microscopic simulation tool. The control delay for boksu intersection reduced from 28.6 seconds to 4.4 seconds and the KRIBB intersection sharply reduced from 156.4 seconds to 23.6 seconds. In addition, carbon dioxide for two intersections reduced to 646.5 ton/year if the intersection is changed to roundabout. Future research tasks include testing the experiment for networks, as well as for various intersection types.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.9
• /
• pp.87-102
• /
• 2005

In the congested urban areas, tunnelling close to existing structures or services often occurs due to the lack of surface space so that tunnelling-induced ground movements may cause a serious damage to the adjacent structures. This study focused on the two dimensional laboratory model pile-soil-tunnelling interaction tests using a close range photogrammetric technique. Testing equipments and procedures were Introduced, particularly features of aluminium rods regarded as the frictional granular material. The experimental result showed that the photo imaging process by the VMS and EngVis programs proved to be a useful tool in measuring the pile tip movements during the tunnelling. Consequently, the normalised pile tip movement data for the influence zones can be generated by the laboratory model tests using the Photogrammetric technique. This study presents influence zones associated with the normalized pile tip settlements due to tunnelling in the cohesionless material. The influence zones were Identified by both a laboratory model test and a numerical analysis. The normalized pile tip movements from the model test were in good agreement with the numerical analysis result. The influence zones proposed in this study could be used to decide the reasonable location of tunnel construction in the planning stage. However, the scale of model pile and model tunnel sizes must be carefully adjusted as real ones for practical application considering the ground conditions at a given site.

• Journal of Korean Society of Forest Science
• /
• v.87 no.2
• /
• pp.300-307
• /
• 1998

It is not an easy task for forest managers to make sound decisions on forest management and operations planning because of huge sets of spatial and temporal data and complex decision-making processes involved. However, as an efficient tool, GIS techniques enable them to enhance broad understandings on forest inventory and management conditions. In this study, we developed a GIS model for field use in forest management. In building the model, we have chosen MapInfo version 4.0 as the basic engine of the model. The model also includes an interface module to help forest managers use MapInfo functions easily. It handles MapInfo functions required to manage inventory data and analyze spatial distributions of forest stands. For testing field applicability of the model, we have build field data sets for a district of Chunchun National Forest. Then, we tested functions through quarrying stand attributes and constructing thematic maps. In this paper, the structures and functions of the model as well as the results of field applications are discussed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.535-545
• /
• 2019

The PBA of ship weapon system should be installed and operated under harsh environmental conditions and so it should be highly reliable to endure the mission profiles during its entire lifetime. In the case of PBA failure during operation, rapid maintenance is highly likely to be difficult due to problems such as supply of parts, which can have a devastating effect on the mission. In order to validate the reliability of PBA, a series of tests are performed with PBA samples, but they require time, testing facilities, samples, expenses and failure analysis if failed. The reliability of PBA is predicted on the basis of specifications such as MIL-HDBK-217F, but this specification does not take into account failure mechanisms for specific design details, environment and usage, interconnects and its characteristics that drive many failures of PBA in the field. Therefore, this study predicts the reliability of PBA using an RPA tool and proposes the RPA methodology as a validation process at the design stage. With RPA, it is now possible to achieve design validation including inherent failure mechanism, identification of weakest link, alternative design options, and test plan development.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2008.03a
• /
• pp.79-88
• /
• 2008

Since the hydraulic fracturing field testing method was introduced first to Korean geotechnical engineers in 1994, there have been lots of progresses in a hardware system as well as an interpretation tool. The hydrofracturing system of first generation was the pipe-line type, so it was not easy to handle. It had been modified to a wire-line system at their second generation. It was more compact one but it also needed an additional air-compressor. Our current system is much more compact and operated by all-in-one system, so it doesn't need an additional air-compressor. With a progress in a hardware system, the software for analyzing the in-situ stress regime has also been progressed. For example, the shut-in pressure, which is the most ambiguous parameter to be obtained from hydrofracturing pressure curves, can now be acquired automatically from the various methods. While the hardware and software for hydrofracturing tests are being developed during the last decade, the author could accumulate the field test results which can cover the almost whole area of South Korea. Currently these field data are used widely in a feasibility study or a preliminary design step for tunnel construction in Korea. Regarding the difficulties in a site selection and a test performance for the in-situ stress measurement at an off-shore area, the in-situ stress regime obtained from the field experiences in the land area can be used indirectly for the design of a sub-sea tunnel. From the hydrofracturing stress measurements, the trend of magnitude and direction of in-situ stress field was shown identically with the geological information in Korea.

• Toxicological Research
• /
• v.22 no.4
• /
• pp.307-313
• /
• 2006

The development of in vitro assays has been recommended to screening and testing the potential endocrine disruptors (EDs). These assay systems focus only on identifying the estrogenic or antiestrogenic activity of EDs, whereas a few studies have been carried out to screen the thyroid hormone (TH) disruptors. The aim of this study was to evaluate a test system to detect TH disruptors using rat pituitary tumor $GH_3$ cells. The test system is based on the TH-dependent increase in growth rate. As expected, L-3,5,3-triiodothyronine ($(T_3)$ markedly induced a morphological change in $GH_3$ cells from flattened fibroblastic types to rounded or spindle-shaped types. $T_3$ stimulated $GH_3$ cell growth in a dose-dependent manner with the maximum growth-stimulating effect being observed at a concentration $1{\times}10^9M$. In addition, $T_3$ increased the release of growth hormone and prolactin into the medium of the $GH_3$ cells culture. Using this assay system, the TH-disrupting activities of bisphenol A (BPA) and its related compounds were examined. BPA, dimethy/bisphenol A (DMBPA), and TCI-EP significantly enhanced the growth of $GH_3$ cells in the range of $1{\times}10^{-5}M\;to\;1{\times}10^{-6}M$ concentrations. In conclusion, this in vitro assay system might be useful for identifying potential TH disruptors. However, this method will require further evaluation and standardization before it can be used as a broad-based screening tool.

• Horticultural Science & Technology
• /
• v.32 no.6
• /
• pp.853-863
• /
• 2014

This study was carried out to construct a DNA profile database of 100 strawberry cultivars using microsatellite markers. Two hundred seventy four microsatellite primer pairs were screened with a set of 21 strawberry cultivars with different morphological traits. Twenty five primer pairs were selected because they produced reliable and reproducible fingerprints. These primer pairs were used to develop DNA profiles of 100 strawberry cultivars. Three to thirteen alleles were detected by each marker with an average of 7.50. The average polymorphism information content varied from 0.331 to 841 (average 0.706). Cluster analysis showed that the 100 cultivars were divided into 7 major groups reflecting geographic origin and pedigree information. Moreover, most of the cultivars could be discriminated by marker genotypes. These markers will be useful as a tool for the protection of plant breeders' intellectual property rights in addition to providing the means to intervene seed disputes relating to variety authentication.

• Journal of The Korean Society of Inherited Metabolic disease
• /
• v.15 no.3
• /
• pp.101-109
• /
• 2015

Classic galactosemia (OMIM #230400) is an autosomal recessive inherited metaboic disorder caused by a deficiency of the galactose-1-phosphate uridyltransferase (GALT, EC2.7.7.12) due to mutations in the GALT gene. If untreated, classic galactosemia is a potentially lethal disease presenting with poor feeding, vomiting, jaundice, liver failure, increased bleeding tendency, and septicemia leading to death within a few days after birth. Since 2006, expansion of newborn screening has been enabled the early diagnosis and early intervention of classic galactosemia in Korea. However, newborn screening, followup testing for confirmatory diagnosis and intervention for galactosemia continue to present challenges. In Korea, the prevalence of the classic galactosemia is considered relatively low compared to that of western countries. And the genotype is also clearly different from those of other population. Therefore, our own guideline for confirmatory diagnosis and intervention is needed. Here, the diagnostic algorithm for galactosemia after positive newborn screening result in Korea has been proposed. Considering the low prevalence and different mutation spectrum in Koreans, the early mutation analysis of GALT gene could be a useful tool for the accurate diagnosis and making any treatment decision.

• Journal of Preventive Medicine and Public Health
• /
• v.24 no.1 s.33
• /
• pp.93-97
• /
• 1991

The time honoured tuning fork at present widely available for examining vibration sensation is brought about the problem of great interobserver variation. To resolve t his problem, author developed a divice using electric magnet that stimulates constantly tuning fork. The perception time of vibration from tunung fork by this device was tested on the index finger of dominant hand of twenty eight subjects. It was 12.44 seconds on average and ranged from 9.47 to 17.25. Coefficient of variation of it was 16.89 percent. Correlation coefficient between test and retest after 30 minutes was 0.957(p<0.01). This device is portable. Test procedure in non-invasive, non-aversive and simple, can be performed within one minute, and does not require the skilled technician. It is felt that this device testing vibration perception time is suitable as screening tool for early detection of occupational peripheral neuropathy.

• Archives of design research
• /
• v.16 no.1
• /
• pp.63-72
• /
• 2003

The purpose of this study is to understand the character of concerned local area through using roadside space that is space for daily experience of citizen as target, extracting symbolic image reconsidering the historical and cultural character and clarifying the local identity on the basis of it. Through applying image of local symbolism and future-oriented roadside to street furniture, I tried to express local symbolism and through composing symbolic roadside of local that can be newly recognized as unique street, I tried to give a local symbolism and compose active roadside environment. Through providing basic material and actual design example, this paper tried to activate characterized local culture. As the method to approach design of symbolic roadside, the researcher divided local symbolic image into present local image and future-oriented image through selecting the roadside that historical element is lost and urbanization is achieved as target. The researcher characterized local roadside, using street furniture as symbolic tool of future-oriented roadside on the basis of symbolic image extracted from image evaluation testing. This paper has the meaning to suggest one direction for extracting symbolism when organizing distinguished roadside through applying symbolic image to roadside environmental facility, helping for of local resident's sense of place, his self-esteem and love for his hometown and public authority's establishing and promoting the policy concerned to the context of this paper.