• 한국소음진동공학회논문집
• /
• 제22권10호
• /
• pp.968-973
• /
• 2012

Slam testing is a mandatory testing process to evaluate the fatigue resistance of a door plate module before delivering it to car makers. This process is very hard job to complete it since the testing facilities are considerably expensive and the required testing time is relatively very long, i.e. more than eight days for a single specimen. In this paper, an accelerated testing method of a door plate module is proposed using vibration test equipment instead of the current one by exposing to the critical excitation of a door glass. Under the proposed excitation method, the similar testing result can be evaluated within less than two hours. The suitability of the proposed testing method was demonstrated by comparing failure modes of both the current testing method and the proposed one.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.291-298
• /
• 2003

The resonant column testing is a laboratory testing method to determine the shear modulus and the material damping factor of soils. The method has been widely used for many applications and its importance has been increased. Since the establishment of the testing method in 1963, the low-technology electronic devices for testing and data acquisition have limited the measurement to the amplitude of the linear spectrum. The limitations of the testing method were also attributed to the assumption of the linear-elastic material in the theory of the resonant column testing and to the use of the wave equation for the dynamic response of the specimen. For the better theoretical formulation of the resonant column testing, this study derived the equation of motion and provided its solution. This study also proposed the improved data reduction and analysis method for the resonant column testing, based on the advanced data acquisition system and the proposed theoretical solution for the resonant column testing system. For the verification of the proposed data reduction and analysis method, the numerical simulation of the resonant column testing was performed by the finite element analysis. Also, a series of resonant column testing were peformed for Joomunjin sand, which verified the feasibility, of the proposed method and showed the limitations of the conventional data reduction and analysis method.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.257-260
• /
• 2005

A general electric acceleration testing method for estimation of chloride diffusion coefficient is RCPT and CTH. Also, this testing methods have merit that reduce the testing time. In this paper, an experimental study is executed to investigate the effect of testing method on coefficient of chloride diffusion and it is compared with RCPT and CTH. According to this experiment results, W/C ratio and testing method influence chloride diffusion coefficient of concrete. As W/C ratio is increased, diffusion coefficient in concrete is also increased. Diffusion coefficient obtained by each testing method show the different values. However, there is no remarkable difference between the two testing method.

• 한국컴퓨터정보학회논문지
• /
• 제23권2호
• /
• pp.9-16
• /
• 2018

Recently, as various IP set-top boxes based on Android OS have been widely used in general households and public facilities, complaints about services and set-top boxes have continued to increase as much as other smart devices. In order to reduce this problem, the manufacturer performs the testing work before the product is commercialized. However, the testing can reduce potential defects in the product, but it can not prove that the product is free of defects. Therefore, the quality of the product can vary depending on how effective testing techniques are introduced. In this paper, we propose a new exploratory testing method that minimizes test case creation time and makes it easier to plan and execute test while simultaneously learning how to run the product under test. Using the first proposed method, the test time is reduced by about 16.7 hours and the defect detection rate is 25.4% higher than the formal specification-based testing method. Informally, the test time was shortened by about 4.7 hours and the defect detection rate was 13% higher than the informal experience-based testing method.

• Smart Structures and Systems
• /
• 제4권6호
• /
• pp.809-828
• /
• 2008

Real-time hybrid testing is an attractive method to evaluate the response of structures under earthquake loads. The method is a variation of the pseudodynamic testing technique in which the experiment is executed in real time, thus allowing investigation of structural systems with time-dependent components. Real-time hybrid testing is challenging because it requires performance of all calculations, application of displacements, and acquisition of measured forces, within a very small increment of time. Furthermore, unless appropriate compensation for time delays and actuator time lag is implemented, stability problems are likely to occur during the experiment. This paper presents an approach for real-time hybrid testing in which time delay/lag compensation is implemented using model-based response prediction. The efficacy of the proposed strategy is verified by conducting substructure real-time hybrid testing of a steel frame under earthquake loads. For the initial set of experiments, a specimen with linear-elastic behavior is used. Experimental results agree well with the analytical solution and show that the proposed approach and testing system are capable of achieving a time-scale expansion factor of one (i.e., real time). Additionally, the proposed method allows accurate testing of structures with larger frequencies than when using conventional time delay compensation methods, thus extending the capabilities of the real-time hybrid testing technique. The method is then used to test a structure with a rate-dependent energy dissipation device, a magnetorheological damper. Results show good agreement with the predicted responses, demonstrating the effectiveness of the method to test rate-dependent components.

• 한국지반공학회논문집
• /
• 제19권4호
• /
• pp.133-144
• /
• 2003

공진주 실험은 흙의 전단탄성계수, 재료감쇠비 등을 결정하는 실험으로, 최근 내진해석의 중요성과 더불어 그 사용빈도와 중요성이 증가하고 있다. 공진주 실험은 1960년 이후 널리 활용되어 왔으나, 현재까지의 공진주 실험은 측정장비의 제한성 때문에, 주로 선형스펙트럼 (linear spectrum)의 진폭성분만을 측정하여 왔다. 이는 공진주 실험 시스템의 동적거동을 규명하는 이론에 있어서도 시료의 점성이 고려되지 않았던 것과 동적거동에 대한 이해가 부족했기 때문이기도하다. 최근 조성호 등은 이러한 한계성을 극복할 수 있는 이론적 근거를 제시하였다. 즉, 공진주 실험 시스템의 동적거동에 대한 운동방정식과 그 일반해를 제시함으로써, 이론에 부합하는 공진주 실험의 자료분석 및 해석기법의 기초를 정립하였다. 본 연구에서는 발전된 계측장비와 공진주 실험 시스템의 동적거동에 대한 이론적 모델링을 이용하여 신뢰도가 향상된 공진주 실험의 자료분석 및 해석기법을 제안하였다. 그리고, 유한요소해석에 의한 공진주 실험의 수치실험을 통하여 본 연구에서 제안한 해석기법의 신뢰성과 타당성을 확인하였다. 또한, 주문진 표준사에 대한 공진주 실험을 통하여, 본 연구에서 제안한 자료분석 및 해석방법의 적용성을 확인하였으며, 기존 해석방법과의 비교를 통하여 기존 방법의 한계성과 문제점을 살펴보았다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.459-462
• /
• 2002

The conventional thermal insulator and power transformer testing is widely used in surface aging measurement of outside insulator because those testing can carry out very short time in Lab testing. Also thermal testing is able to offer the standard judgement of relative degradation level of outside HV machine. There it is very useful method compare to previous conventional thermal testing method and effective Lab testing method. But surface discharges(SD) have very complex characteristics of discharge pattern so it is required estimation research to development of precise analysis method. In recent, the study of IRR-camera is carrying out discover of temperature of power equipment through condition diagnosis and system development of degradation diagnosis. In this study, thermal testing of Power transformer is measured with partial temperature distribution in real time.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 제4회 영호남학술대회 논문집
• /
• pp.69-72
• /
• 2002

The conventional thermal insulator and power transformer testing is widely used in surface aging measurement of outside insulator because those testing can carry out very short time in Lab testing. Also thermal testing is able to offer the standard judgement of relative degradation level of outside HV machine. There it is very useful method compare to previous conventional thermal testing method and effective Lab testing method. But surface discharges(SD) have very complex characteristics of discharge pattern so it is required estimation research to development of precise analysis method. In recent, the study of IRR-camera is carrying out discover of temperature of power equipment through condition diagnosis and system development of degradation diagnosis. In this study, thermal testing of power transformer is measured with partial temperature distribution in real time.

• Geomechanics and Engineering
• /
• 제31권6호
• /
• pp. 583-597
• /
• 2022

Frost heave can cause uneven ground uplift that may damage geo-infrastructure. To assist damage-prevention strategies, standard frost heave testing methods and frost susceptibility criteria have been established and used in various countries. ASTM International standard testing method is potentially the most useful standard, as abundant experimental data have been acquired through its use. ASTM International provides detailed recommendations, but the method is expensive and laborious because of the complex testing procedure requiring a freezing chamber. A simple frost heave testing method using a temperature-controllable cell has been proposed to overcome these difficulties, but it has not yet been established whether a temperature-controllable cell can adequately replace the ASTM International recommended apparatus. This paper reviews the applicability of the ASTM International testing method using the temperature-controllable cell. Freezing tests are compared using various soil mixtures with and without delivering blow to depress the freezing point (as recommended by ASTM International), and it is established that delivering blow does not affect heave rate, which is the key parameter in successful characterization of frost susceptibility. As the freezing temperature decreases, the duration of supercooling of pore water shortens or is eliminated; i.e., thermal shock with a sufficiently low freezing temperature can minimize or possibly eliminate supercooling.

• 한국정보처리학회논문지
• /
• 제4권11호
• /
• pp.2832-2839
• /
• 1997

본 연구에서는 Asynchronous Transfer Mode (ATM) 계층의 기능중 유휴 가상 채널에 프로토콜 프로토콜 적합성 시험 제어 기능을 갖게 하여 Test Coordination Procedures (TCP) 채널로 활용하는 방안을 제시하였다. 프로토콜 적합성 시험을 위하여 국제 기구에서 권고하고 있는 방법중 원격 시험 방법을 선택하면 System Under Test (SUT)측에 서 능동적으로 Test Event를 발생시켜야 하는 경우에 개발자가 직접 수동적으로 운용을 하거나, Implementation Under Test (IUT)에 대한 제어 및 관찰이 불가능한 경우도 발생하게 된다. ATM망에서 프로토콜 적합성 시험시 시험 영역(Test Coverage)을 최대화하고, 오류검출 영역(Fauit Coverase)을 극대화하기 위해서는 원격시험방법보다는 분산시험방법이 적절하며, 분산시험방법을 채택할 경우 TCP를 구현하기 위하여 시험정보를 전달하기 위한 채널을 확보하는 것이 요구된다. 본 고에서 제안하고 있는 방법은 오류 검출 영역을 극대화 시키고 오퍼레이터의 개입없이 시험의 자동화 구현이 용이하고, ATM장치의 정상동작에는 영향을 주지 않음은 물론 시험제어를 위한 별도의 채널을 확보하지 않고서도 분산시험방법을 적용할 수 있다는 점 을 특징으로 들 수 있다．