• Korean Journal of Adult Nursing
• /
• v.20 no.4
• /
• pp.664-673
• /
• 2008

Purpose: The purpose of this study was to identify the effect of meridian acupressure on constipation in bed-ridden aged inpatients. Methods: The research design was a non-synchronized non-equivalent control group pretest-posttest design. The subjects consisted of 28 bed-ridden aged inpatients. Meridian acupressure was administered to the experimental group at 30 minutes before breakfast every morning for two weeks. Each meridian was pressured for 10 seconds, 10 times. The frequency of defecation and stool form were examined every day. The data was analyzed by the $x^2$-test, Fisher's exact test, t-test and repeated measures ANOVA. Results: The experimental group given Meridian Acupressure had a higher frequency of defecation(F = 59.372, p = .000) and normal stool(F = 46.046, p = .000) than the control group. Conclusion: The results suggest that Meridian Acupressure was an effective method for the relief of constipation for bed-ridden aged inpatients. A follow -up research is needed to validate that other patients with constipation can use the Meridian Acupressure as a non-invasive nursing intervention instead of a laxative or enema.

• Nuclear Engineering and Technology
• /
• v.52 no.11
• /
• pp.2491-2498
• /
• 2020

The paper concentrates on an experimental study of the pressure drop in double-layered packed beds formed by glass spheres, having the configuration of horizontal and vertical stratification. Both single-phase and two-phase flow tests are performed. The pressure drop during the test is recorded and the measured data are compared with those of homogeneous beds consisting of mono-size particles. The results show that for the horizontally stratified bed with fine particles atop coarse particles, the pressure drop in top layer is found higher than those of homogenous bed consisting of the same smaller size particles, while the measured pressure drop of bottom part is similar with those of similar homogenous bed. But for the homologous bed with upside-down structure, the stratification has little or no effect on the pressure drop of the horizontally stratified bed, and the pressure drop of each layer is almost same as that of homogeneous bed packed with corresponding spheres. Additionally, in vertically stratified bed, the pressure drops on the left and right side is almost equal and between those in homogeneous beds. It is speculated that vertically stratified structure may lead to lateral flow which redistributes the flow rate in different parts of packed bed.

• Journal of Korean Clinical Nursing Research
• /
• v.27 no.2
• /
• pp.179-186
• /
• 2021

Purpose: The purpose of our study was to identify the bleeding risk factors and to validate the safety of shortening the bed rest time after bone marrow examination in pediatric hemato-oncologic patients. Methods: From July 2019 to September 2020, 145 patients were enrolled from a single center. Medical records were reviewed retrospectively. Descriptive statistics were presented, and the data were analyzed using 𝑥²-test, Fisher's exact test, and a logistic regression. Results: After two hours of bed rest, most of the patients (91.7%) did not have bleeding complications, and only 8.3% of the patients had a minor bleeding. The rate of major bleeding complications, including hematoma, retroperitoneal hemorrhage rate was zero. The bleeding complications was frequently found on bilateral procedures than unilateral procedures and the difference were statistically significant (p<.05). Conclusion: Two hours of bed rest time after bone marrow examination could be safe and adequate in pediatric hemato-oncologic patients.

• Korean Journal of Remote Sensing
• /
• v.29 no.5
• /
• pp.527-535
• /
• 2013

Extraction of correct endmembers is prerequisite to successful spectral unmixing analysis. Various endmember extraction algorithms have been proposed and most experiments based on endmember extraction have used synthetic image and AVIRIS image data. However, these data can present different characteristics comparing with hyperspectral images acquired from real domestic environment. For this study, a test-bed was constructed for analysing the difference on diverse substances and sizes in domestic areas, and AISA hyperspectral imagery acquired from the test-bed was tested with two well-known endmember extraction algorithms: IEA, and N-FINDR. The results indicated that two different algorithms depended on the number of endmembers and material types in the test-bed. Therefore, optimized number of endmembers and characteristics of materials in test-bed site should be considered for the effective application of endmember extraction algorithms.

• KIISE Transactions on Computing Practices
• /
• v.22 no.3
• /
• pp.151-156
• /
• 2016

Cloud computing systems require a huge number of storage servers due to the growing implications of power bills, carbon emissions, and logistics of data centers. These considerations have motivated researchers to improve the energy efficiency of storage servers. Most servers use a lot of power irrespective of the amount of computing that they are doing, and one important goal is to redesign servers to be power-proportional. However, Research on large-scale storage systems is hampered by their cost. It is therefore desirable to develop a scalable test-bed for evaluating the power consumption of large-scale storage systems. We are building on open-source projects to construct a test-bed which will contribute to the assessment of power consumption in tiered storage systems. Integrating the cloud application platform can easily extend the proposed testbed laying a foundation for the design and evaluation of low-power storage servers.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.2
• /
• pp.113-119
• /
• 2020

The IoT-based sensor network is one of the methods that can be efficiently applied to maintain the facilities, such as bridges, at a low cost. In this study, based on LoRa LPWAN, one of the IoT communications, sensor board for cable tension monitoring, data acquisition board for constructing sensor network along with existing measurement sensors, are developed to create bridge structural health monitoring system. In addition, we designed and manufactured a smart sensor node for LoRa communication and established a sensor network for monitoring. Further, we constructed a test bed at the Yeonggwang Bridge to verify the performance of the system. The test bed verification results suggested that the LoRa LPWAN-based sensor network can be applied as one of the technologies for monitoring the bridge structure soundness; this is excellent in terms of data rate, accuracy, and economy.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2023.04a
• /
• pp.79-79
• /
• 2023

With the development of digital technology, the size of the smart agriculture market at home and abroad is rapidly expanding. It is necessary to establish a foundation for sustainable precision agriculture in order to respond to the aging of rural areas and labor shortages. This study was conducted to establish an automated digital agricultural test bed for soybean production management using data suitable for agricultural environmental conditions in Korea and to demonstrate the field of leading complexes. In order to manage water smartly, we installed a subsurface drip irrigation system in the upland field and an underground water level control system in the paddy field. Based on data collected from sensors, water management was controlled by utilizing an integrated control system. Irrigation was carried out when the soil moisture was less than 20%. For effective water management, soil moisture was measured at the surface, 15cm, and 30cm depth. The main growth characteristics and yield, such as stem length, number of branches, and number of nodes of the main stem, were investigated during the main growth period. During the operation of the test bed, drought appeared during the early vegetative growth period and maturity period, but in the open field smart agriculture test bed, water was automatically supplied, reducing labor by 53% and increasing yield by 2%. A test bed was installed for each field digital farming element technology, and it is planned to verify it once more this year. In the future, we plan to expand the field digital farming technology developed for leading farmers to the field.

• 한국연소학회:학술대회논문집
• /
• 2014.11a
• /
• pp.29-32
• /
• 2014

The practical route for disposal of sewage sludge becomes energy recovery by combustion after its ocean dumping is banned in 2012 in Korea. Due to the high moisture content, however, sewage sludge is required to be dried before transport and combustion. In this study, pyrolysis and combustion characteristics of dried sewage sludge was investigated in a small-scale fixed bed reactor in order to provide fundamental data for energy recovery of the fuel. As the first step of combustion, the primary products of pyrolysis were analyzed in a fixed bed reactor for the condensable volatiles (tar), non-condensable gases, and char. For the combustion characteristics, another fixed bed reactor was constructed to monitor the weight and temperature of the fuel particles during ignition and combustion under different air flow rates. The test results were used to derive the ignition and burning rates.

• Journal of the Korean housing association
• /
• v.19 no.1
• /
• pp.67-77
• /
• 2008

In general, the function of university dormitory includes residental, educational and many other functions for students who need quite environment and energetic living life. Among these many functions, the most important function is residental function (bed room). This study attempts to evaluate the bed room environment of four university dormitories in north region of Gyeongbuk Province using resident's (students) need and satisfaction. In the present work, SPSS window version12.0 program's Anova (duncan, scheff, t-test.) was used for analysis of statistical data which obtained from survey. The field surveys carried out for a total samples of 473 residents such as AD (118), DY (159), Kw (101) and SJ (95)) types of bed room in four university dormitories. The result appears that the most dissatisfied factor of resident was personal privacy, and the most satisfied factor was the direction (location) of bed room space.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.43-46
• /
• 1997

Reliability engineering is regarded as the major and important roll for all industry. And advanced manufacturing systems with high sped and intelligent have been developing for betterment of machining ability. In this study, we have systemized evaluation of reliability for machinery system. We proposed the reliability assessment and designed and manufactured reliability test-bed to evaluate reliability. In addition we acquired reliability data using test-bed system and made database to handle reliability data. And also we not only use reliability data by analyzing reliability, but also apply design review method using analyzing critical units of machinery system. Form this study, we will expect to guide and increase the reliability engineering in developing and processing phase of high quality product.