• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2003.10a
• /
• pp.455-458
• /
• 2003

A hydraulic scale model test with movable bed was performed to obtain design data for groins to protect the coast in front of the Sang-ri seadike in Sukmodo, located in the Han-river estuary area. The vertical scale of the model is 1/100 and the horizontal scale 1/250 according to Froude similitude. The result of test for original coast and groins showed that the coast in front of the Sang-ri seadike was eroded by tidal current. Three alternatives for the planning of new groins were tested. It is concluded that the alternative B-3 test scheme was the best plan to protect the coast among others.

• Journal of Auto-vehicle Safety Association
• /
• v.15 no.1
• /
• pp.16-26
• /
• 2023

Recently, the importance of simulation in a virtual driving environment as well as real road-based tests for autonomous vehicle testing is increasing. Real road tests are being actively conducted at K-City, an autonomous driving test bed located at the Korea Automobile Safety Test & Research Institute of the Transportation Safety Authority. In addition, the need to advance the K-City virtual driving environment and build a virtual environment similar to the autonomous driving system test environment in real road tests is increasing. In this study, for K-City of Korea Automobile Safety Test & Research Institute, using detailed drawings and actual field data, K-City virtual driving environment was advanced, and similarity verification was verified through comparative analysis with actual K-City.

• Korean Chemical Engineering Research
• /
• v.59 no.3
• /
• pp.467-479
• /
• 2021

Abstract: A kinetic model was developed for the dehydration of ethanol to ethylene based on two parallel reaction pathways. Kinetic parameters were estimated by fitting experimental data of powder catalysts in a lab-scale test, and the effectiveness factor was determined using data from pellet-type catalysts in bench-scale experiments. The developed model was used to design a multitubular fixed-bed reactor (MTR) and an adiabatic reactor (AR) at a 10 ton per day scale. The two different reactor types resulted in different process configurations: the MTR consumed the ethanol completely and did not produce the reaction intermediate, diethyl ether (DEE), resulting in simple separation trains at the expense of high equipment cost for the reactor, whereas the AR required azeotropic distillation and cryogenic distillation to recycle the unreacted ethanol and to separate the undesired DEE, respectively. Quantitative analysis based on the equipment and annual energy costs showed that, despite high equipment cost of the reactor, the MTR process had the advantages of high productivity and simple separation trains, whereas the use of additional separation trains in the AR process increased both the total equipment cost and the annual energy cost per unit production rate.

• Journal of Internet Computing and Services
• /
• v.11 no.4
• /
• pp.85-94
• /
• 2010

In this paper, we propose a location-prediction structure that can provide user service in advance. It consists of seven steps and supplies intelligent services which can forecast user's location. Context information collected from physical sensors and a history database is so difficult that it can't present importance of data and abstraction of data because of heterogeneous data type. Hence, we offer the location-prediction that change data type from heterogeneous data to homogeneous data. Extracted data is clustered by SOFM, then it gets user's location information by ARIMA and realizes the services by a reasoning engine. In order to validate the proposed location-prediction, we built a test-bed and test it by the scenario.

• Smart Structures and Systems
• /
• v.11 no.5
• /
• pp.453-476
• /
• 2013

DuraMote is a remote sensing system developed for the "NIST TIP project: next generation SCADA for prevention and mitigation of water system infrastructure disaster". It is designed for supervisory control and data acquisition (SCADA) of ruptures in water pipes. Micro-electro mechanical (MEMS) accelerometers, which record the vibration of the pipe wall, are used detect the ruptures. However, the performance of Duramote cannot be verified directly on a water distribution system because it lacks an acceptable recordable level of ambient vibration. Instead, a long-span cable-stayed bridge is an ideal test-bed to validate the accuracy, the reliability, and the robustness of DuraMote because the bridge has an acceptable level of ambient vibration. The acceleration data recorded on the bridge were used to identify the modal properties of the structure and to verify the performance of DuraMote. During the test period, the bridge was subjected to heavy rain, wind, and a typhoon but the system demonstrates its robustness and durability.

• Journal of Families and Better Life
• /
• v.32 no.2
• /
• pp.41-52
• /
• 2014

The present study investigated the sleep patterns 1-to 3-year-old children and examined whether their sleep patterns would predict their early adjustment to daycare centers. The participants were 239 young children attending daycare centers in Seoul. The data on children's sleep patterns were collected by parent report. Children's adjustment to daycare was assessed by daycare providers' reports. The data were analyzed by means of Chi-square test, t-test, Pearson's correlation, ANOVA and discriminant analysis. The results were as follows: Children from dual-earner families had shorter nocturnal sleep duration than those from single-earner families. There was no significant relation between daytime sleep duration and sleep-onset time at night. It was found that children who go to bed earlier were more likely to get sufficient sleep without nocturnal wakefulness. Age and total sleep duration were seen to be significant variables when it came to discriminating between the adjustment versus maladjustment groups.

• Korea Journal of Hospital Management
• /
• v.5 no.1
• /
• pp.84-104
• /
• 2000

This paper analyzes the technical efficiency of thirty two hospitals in Korea using DEA(Data Envelopment Analysis). DEA provides an efficiency measure for each hospital compared to the most efficient one. The amount and sources of inefficiency that are identified by the DEA are useful for benchmarking to improve efficiency. The results from multiple regression analysis and Wilcoxon Rank Sum test show that bed turnover, hospital size, and average length of stay are related to hospital efficiency.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.282-285
• /
• 2003

본 논문에서는 국제우주정거장 (International Space Station; ISS) 개발을 위한 필수 요건인 데이터 인터페이스 기술을 습득하고자, 국제우주정거장에 부착되는 탑재모듈 (Payload)과 인터페이스를 위한 요구사항을 분석/설계하였으며, 이를 검증하기 위한 시뮬레이터의 개발결과를 소개한다. 국제우주정거장과 탑재모듈간의 데이터 인터페이스를 정의하고 구현함으로써, 추후 여러 가지 탑재모듈 개발 시 표준 데이터 인터페이스에 대한 기술을 확보할 수 있으며, 탑재모듈의 특성이나 국제우주정거장의 구체적인 기능에 대한 추가 연구를 통해 탑재모듈 개발 ETB (Electrical Test Bed) 로서의 기능도 수행할 수 있을 것으로 기대된다.

• Journal of the Korea Society for Simulation
• /
• v.9 no.3
• /
• pp.65-75
• /
• 2000

In recent years, significant advances in computers and communication technologies have made multimedia services feasible. As a result, various queuing models and cost models on architecture and data placement for multimedia server have been proposed. However, these analytical techniques use only probabilistic models to represent the behavior of a system, and then they have several limitations like accuracy. Simulation is a viable alternative to analytical model. It avoids many of the limitations associated with analytical techniques, allowing for more precise representation of system attributes like workload in program code. In this paper, we propose a simulation test bed that can evaluate performance of real-time multimedia server by using simulation model.

• Journal of Powder Materials
• /
• v.30 no.2
• /
• pp.146-155
• /
• 2023

The Ti-6Al-4V lattice structure is widely used in the aerospace industry owing to its high specific strength, specific stiffness, and energy absorption. The quality, performance, and surface roughness of the additively manufactured parts are significantly dependent on various process parameters. Therefore, it is important to study process parameter optimization for relative density and surface roughness control. Here, the part density and surface roughness are examined according to the hatching space, laser power, and scan rotation during laser-powder bed fusion (LPBF), and the optimal process parameters for LPBF are investigated. It has high density and low surface roughness in the specific process parameter ranges of hatching space (0.06-0.12 mm), laser power (225-325 W), and scan rotation (15°). In addition, to investigate the compressive behavior of the lattice structure, a finite element analysis is performed based on the homogenization method. Finite element analysis using the homogenization method indicates that the number of elements decreases from 437,710 to 27 and the analysis time decreases from 3,360 to 9 s. In addition, to verify the reliability of this method, stress-strain data from the compression test and analysis are compared.