• Journal of the Korean Society for Railway
• /
• v.19 no.4
• /
• pp.498-505
• /
• 2016

As a basic study to develop maintenance-effective optimal ballast track in preparation for upgrading a conventional line to a high speed railway, a full-scale test that combined the components of ballast track was conducted and the characteristic of track settlement was analyzed. As a result of the full-scale test, reduction in maintenance via an increase of the elasticity of only the pad was insignificant; however, the effect increased significantly with increasing of the weight of the sleeper or with increasing of the weight of the sleeper and the thickness of the ballast together with use of a pad with high resiliency. An optimal type of ballast track, in line with upgrading the speed of a conventional line, shall be developed through cost efficiency analysis considering the maintenance cost depending on the track settlement as well as the initial construction cost.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.2
• /
• pp.461-466
• /
• 2020

In this study, the relationship between the track support stiffness and the track impact factor for a sleeper floating track and a turnout system with wood ties currently employed in Korean urban transit was assessed by performing field tests using actual vehicles running along the service lines. Field tests were performed on four track systems (i.e., sleeper floating track, and point, lead and crossing sections of turnout system). The theoretically designed track impact factor and track support stiffness were compared with the corresponding track impact factor and track support stiffness measured through field tests for the target tracks on the service line. The track impact factor for the service line appeared to increase with the deviation of track support stiffness according to vehicle driving direction; therefore, it was inferred that the deviation of track support stiffness between each track section directly affected the track impact factor.

• Journal of the Korean Society for Railway
• /
• v.15 no.5
• /
• pp.485-497
• /
• 2012

Recently, with increasing social interests on noise and vibration induced by railway traffic, the application of floating slab track that can efficiently reduce the railway vibration is increasing. In this study, to more accurately understand the dynamic behavior of the floating slab track, a laboratory mock-up test has been performed, and the static and dynamic behaviors at frequency range near the system resonance frequency were explored. Based on the test results, the design of the floating slab track and the structural analysis model used in the design have been verified. The analytic and test results demonstrate that the dominant frequency of the floating slab track occurs at the frequencies between vertical rigid body mode natural frequency and bending mode natural frequency, and the dominant deformation mode is close to the bending mode. This suggests that in the design of the floating slab track, the bending rigidity of the slab and the boundary conditions at slab joints and slab ends should be taken into consideration. Also, the analytic results by the two-dimensional finite element analysis model using Kelvin-Voigt model, such as static and dynamic deflections and force transmissibility, are found in good agreement with the test results, and thus the model used in this study has shown the reliability suitable to be utilized in the design of the floating slab track.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.2 no.2
• /
• pp.1-7
• /
• 2005

For the reliability evaluation of the track drive unit(TDU), firstly, we analyzed the major failure modes through FMEA(failure mode & effects analysis), FTA(failure tree analysis), and 2-stage QFD(quality function deployment), and then quantitatively determined the priority order of test items. The Minitab analysis was also performed for prediction of life distribution and parameters of TDU by use of field failure data collected from 430 excavators for two years. In addition, we converted the fluctuation load in field conditions into the equivalent load, and for evaluation of the accelerated lift by the cumulative fatigues, the equivalent load is again divided into the fluctuation load by reference of test time. And then, by use of the test method in this paper, the acceleration factor(AF) of needle bearing inside planetary gear which is the most weakly designed part of TDU is achieved as 5.3. This paper presents the quantitative selection method of test items for reliability evaluation, the determination method of the accelerated life test time, and the method of non-failure test time based on a few of samples. And, we proved the propriety of the proposed methods by experiments using a TDU for a 30 ton excavator.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.346-353
• /
• 2005

Track substructure(ballast, subgrade) should have sufficient strength and adequate stiffness to fully support track superstructure(rail, fastener, sleeper). Vertical support stiffness of track comes from the sufficient thickness, adequate strength and stiffness of material of substructure layers. Since the vertical support stiffness of track substructure is closely related with the track geometry, the evaluation of the stiffness is very important to understand the track states. This paper introduces the system, which are composed of Ground Penetrating Radar(GPR), Portable Ballast Sampler(PBS), and Light Falling Weight Deflectometer(LFWD), to evaluate substructure condition and summarizes the field test results performed with the reliable system.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1663-1668
• /
• 2010

The terms of track is a train-only line for a train service, in premises of station of a station, that the unit over the track for turnout the track from one track to another track, which it changes the course from the main track that is used for operating a train to the side track, is called a turnout The stick strength of tongue rail is adjusting uniform pressure on the both sides, the adhesion strength between a basic rail and tongue rail has to maintain over 100kg of power value to open over 1mm the ends. This study suggested developing a measuring instrument that can measure a basic rail and the stick strength of a movable rail in according with a switch, such as a switch point, and a performance test. This study ties to be helped that it improves measuring usability for the maintainers through improving quality in a stick measuring instrument, that it solves a technique in the site difficulties through improving a measuring instrument, with reducing the obstacles and expenses.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1833-1837
• /
• 2007

The railroad roadbed plays an important role in distributing and transferring the train loading to subgrade, preventing subgrade from bearing softened by providing appropriate stiffness for subgrade, and eventually supporting the track structures. Presently, the reinforced roadbed was widely constructed in high speed line and is proceeding a research about economical thickness and methodologies for the design of reinforced roadbed. Field test section is located at Kongbu line which is from Suwon to Pungtack. In this study, field test were measured a track irregularity with several types of reinforced roadbed materials by using Track Master. The field testing were conducted between March, 2006 and March, 2007.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.281-285
• /
• 2008

The railroad roadbed plays an important role in distributing and transferring the train loading to subgrade, preventing subgrade from bearing softened by providing appropriate stiffness for subgrade, and eventually supporting the track structures. Presently, the reinforced roadbed was widely constructed in high speed line and is proceeding a research about economical thickness and methodologies for the design of reinforced roadbed. Field test section is located at Kyungbu line which is from Suwon to Cheonan In this study, field test were measured a track irregularity with several types of reinforced roadbed materials by using Track Master. The field testing were conducted between March, 2006 and April, 2008.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.1184-1189
• /
• 2006

Railway vehicle have three translational motions-longitudinal, vertical and lateral, and three rotational motions-rolling, pitching and yawing caused by track irregularity, wheel and rail characteristic, dynamic behaviors etc. The rolling motion in vehicle mainly happens in cases of the vehicles stationary and running on canted track. When the vehicle positioned in stationary on canted track, vehicle is inclined toward inside of installed cant due to gravity component. When the vehicle has running on a track with cant deficiency, vehicle is inclined toward outside of installed cant due to centrifugal force. The roll coefficient(s) is defined as the ratio between the angle of inclination of the vehicle($\eta$) and the angle of the rail level($\alpha$). This paper has noted the test method, test result and analysis result to calculate the roll coefficient according to UIC505-5, international standard

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.1469-1470
• /
• 2010