• 인지과학
• /
• 제14권3호
• /
• pp.13-21
• /
• 2003

이 연구에서는 기존의 지능형 교수기계와 또래 튜터링의 단점을 보완하여 '가르치기를 통한 학습'을 위한 교수가능 에이전트(Teachable Agent, 이하 TA) 의 이론적 배경 및 설계방안을 제시하고자 한다. TA는 학습자가 컴퓨터 에이전트를 가르치는 과정을 통해 학습하는 시스템으로 교수 Module, 묻고 답하기 Module, 테스트 Module, 학습자료 Module 등의 4 가지 Module로 구성된다. 교수 Module에서는 개념도(concept map)의 구성을 통해 튜터 역할을 하는 학습자가 TA 의 심성모형 (mental model)을 수정하고 update하게 되며, 묻고 답하기 Module에서는 인터렉티브 창을 통해 튜터와 TA가 제한된 방식으로 학습내용에 관한 질문과 응답을 함으로써 개념도를 수정보완하게 된다. 테스트 Module에서는 튜터가 가르친 TA가 미리 정해놓은 학습목표에 도달하였는지를 평가하게 된다. 테스트 결과 TA가 일정 수준에 도달하지 못한 경우에는 개념도의 재수정 과정을 통해 계속적인 학습이 이루어지도록 한다. 학습자료 Module은 튜터가 참고할 자료를 제공해 주는 Module이다. 이러한 TA는 튜터의 역할을 담당하는 학습자에게 깊이 있는 인지적 처리와 능동적인 학습동기를 경험하도록 함으로써 실제 교육현장에서의 유용한 교수/학습도구로 활용될 수 있을 것으로 기대된다.

• 대한기계학회논문집A
• /
• 제36권5호
• /
• pp.523-528
• /
• 2012

이동용 전자기기에 적용 가능한 유연성 전자모듈이 롤투롤 공정에 의해 개발되었다. 개발된 전자 모듈은 최 외곽의 두 폴리이미드 층과 그 사이의 동선과 이방성도전필름과 박막 실리콘 칩과 모듈의 봉지재 역할을 하는 접착재료로 구성된다. 개발된 유연성 전자모듈의 신뢰성을 평가하기 위하여 열충격시험, 고온고습 시험, 오토클레이브 시험을 수행하였다. 시험수행 결과 두 시험에서는 문제가 발생하지 않았으나, 오토클레이브 시험에서는 대부분의 시편 모듈 내에 박리가 발생하였다. 발생한 박리의 고장 메커니즘을 연구하기 위하여 봉지재의 흡습 관련 물성치를 실험적으로 분석하고 오토클레이브 시험조건에서의 모듈 내 습기확산과정을 범용 유한요소 프로그램을 이용하여 분석하였다. 해석결과로부터 오토클레이브 시험조건에서 모듈 내에 발생하는 습기확산과정을 밝혀낼 수 있었다.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2003년도 추계학술대회
• /
• pp.237-245
• /
• 2003

More and more many people show a keen interest in the ergonomics application car. One of the recent trends of cockpit development is to integrate fore part of whole cockpit and compartment. The goal of this study is to develop and Analysis of User's Convenience a cockpit prototype based on the design guide of cockpit integration module. The process of this study has been followed analyzing development trend of next generation Automotive cockpit, extracting the design factor needed to making integration module and laying down the design guide of cockpit integration module. Finally, this study is indicate an instance that evaluation of utilization with Integrated Automotive Cockpit Module System.

• 대한안전경영과학회지
• /
• 제5권4호
• /
• pp.157-167
• /
• 2003

More and more many people show a keen interest in the ergonomics application car. One of the recent trends of cockpit development is to integrate fore part of whole cockpit and compartment. The goal of this study is to develop and Analysis of User's Convenience a cockpit prototype based on the design guide of cockpit integration module. The process of this study has been followed analyzing development trend of next generation Automotive cockpit, extracting the design factor needed to making integration module and laying down the design guide of cockpit integration module. Finally, this study is indicate an instance that evaluation of utilization with Integrated Automotive Cockpit Module System.

• Current Photovoltaic Research
• /
• 제7권2호
• /
• pp.46-50
• /
• 2019

The photovoltaic (PV) system consists of solar cells, solar modules, inverters and peripherals. The related evaluation and certification are proceeding as standards published by the IEC (International Electrotechnical Commission) TC (Technical Committee) 82. In particular, PV module is a component that requires stable durability over 20 years, and evaluation in various external environments is very important. Currently, IEC 61215-based standards are being tested, but temperature, humidity, wind and solar radiation conditions are not considered in all areas. For this reason, various types of defects may occur depending on the installation area of the same photovoltaic module. In particular, the domestic climate (South Korea) is moderate. The various test methods proposed by IEC 61215 are appropriate, excessive, or insufficient, depending on environmental condition. In this paper, we analyze the climate data collection for one year to understand the vulnerability of this test method of PV modules. Through this, we propose a test method for PV module suitable for domestic climatic conditions and also propose a technical consideration for installation and design of PV system.

• Current Photovoltaic Research
• /
• 제10권4호
• /
• pp.111-115
• /
• 2022

For the high efficiency of the photovoltaic module, a high-output solar cell, which is the basis of photovoltaic power generation, is required. As the light receiving area of the solar cell increases, the light receiving area of the photovoltaic module also increases. Accordingly, recent trend is to use large-area solar cells such as M6 and M8 instead of M2-based solar cells for manufacturing the photovoltaic module and a study on the mechanical stiffness of the module with increased size is required. In this study, a mechanical load test corresponding to IEC-61215 was performed among the reliability tests of large-area photovoltaic modules. In order to confirm the degree to which the mechanical load test affects the photovoltaic module, the output and EL images were checked by sequentially increasing the pressure by 600 Pa at a pressure of 2400 Pa. Also, factors such as output and efficiency of large-area photovoltaic modules were verified through mechanical load testing of actual large-area photovoltaic modules and the rate of change was very small at 1%.

• Current Photovoltaic Research
• /
• 제12권2호
• /
• pp.41-47
• /
• 2024

CIGS solar cells are thin film solar cells that have excellent light absorption coefficient and can be manufactured with high efficiency through the use of low materials. In Korea, they must pass KS certification for home and commercial installation. KS C 8562 is a standard for evaluating the durability of CIGS and thin film amorphous silicon solar modules and deals with contents such as light, temperature, humidity, and mechanical durability. Unlike general crystalline silicon solar modules, the CIGS solar module has a different behavior of output change through these environmental tests, so if it shows 90% or more of the rated output suggested by the manufacturer after the final test, it is judged to be a suitable product. In this paper, the output before and after individual tests was measured through the test method of KS C 8562 to observe the output change and to discover the vulnerabilities of the CIGS solar module when exposed to various environments. Through this, it was confirmed that humidity exposure was the most vulnerable and that it had output recovery characteristics for light (visible light and ultraviolet rays). This study attempted to present the output behavior characteristics and data of the CIGS module at the time when the high efficiency thin film photovoltaic module market is expected to be created in the future.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.55-55
• /
• 2009

In this paper, we introduce the status of certificate test on crystalline silicon photovoltaic, module in Korea. Up to 5. 2009, about 200 models have passed certificate test under KS C IEC61215 standard. Most products are from Korea, Japan, China. And some are from USA, German and Taiwan. A few environmental test items' results and standard test methods will be discussed. The detail discussion will be shown in the following paper.

• 천문학회보
• /
• 제43권2호
• /
• pp.56.2-56.2
• /
• 2018

Ronchi test is an optical test to check the quality of an imaging system. Wavefront of the optical system can be obtained from the Ronchi patterns. In this poster, we present the Ronchi test module and the optical quality evaluation results. The test module consists of a light source, a pinhole, a beam splitter, a Ronchi ruling and a flat mirror. The test module can be simply adapted to any optical systems. We compare measured surface data for both aluminum and glass parabolic mirrors by analyzing the Ronchi patterns.

• 마이크로전자및패키징학회지
• /
• 제4권2호
• /
• pp.79-83
• /
• 1997

본 연구에서는 휴대용 전화기 및 무선 LAN 의 핵심부품인 RF-Switch Module의 초소형화 설계기술, 표면실장기술, 고주파설계기술, 소형화 SMD기술, Test 기술 및 RF-Switch Module 활용기술 등을 개발하였으며 RF-Switch Module의 설계기반 마련 및 대외 경쟁력 있는 RF-Switch Module의 초소형화 기술을 확보하였다.