• 한국도로학회논문집
• /
• 제16권2호
• /
• pp.11-18
• /
• 2014

PURPOSES : This study aims to develop a strength test method for irregularly shaped concrete block paver. METHODS : Ten (10) different types of concrete block pavers including porous and dense blocks were tested for strength capacities. Destructive and non-destructive methods were used to develop a strength test method for irregularly shaped concrete block paver. The flexural strength evaluation was conducted in accordance to KS F 4419, while compressive strength was conducted with a 45.7mm-diameter core specimen. The impact echo test method was used to evaluate the elastic modulus. Finally, regression analysis was used to investigate the relationship between flexural strength, compressive strength and elastic modulus based on their corresponding test results. RESULTS : The flexural strength of the tested block pavers ranged from 4MPa to 10MPa. At 95% confidence level, the coefficients of determination between compressive-flexural strength relationship and compressive strength-elastic modulus relationship were 0.94 and 0.84, respectively. These coefficients signified high correlation. CONCLUSIONS : Using the test method proposed in this study, it will be easier to evaluate the strength of irregularly shaped concrete block pavers through impact echo test and compressive test, instead of the flexural test. Relative to the flexural strength requirement of 5MPa, the minimum values of compressive strength and elastic modulus, as proposed, are 13.0MPa and 25.0GPa, respectively.

• Communications for Statistical Applications and Methods
• /
• 제9권2호
• /
• pp.443-450
• /
• 2002

In this paper, block designs for control versus test comparisons among the lines for diallel crosses are proposed. These block designs are constructed by using balanced incomplete block designs. Also, the efficiencies of the diallel crosses block designs obtained through this method are tabulated for number of lines 23 or less.

• International Journal of Concrete Structures and Materials
• /
• 제9권1호
• /
• pp.21-33
• /
• 2015

This study aimed to present a reinforced concrete block system that reduces the flange thickness of the existing form block used in new buildings and optimizes the web form, and can thus capable of being used in the seismic retrofit of new and existing buildings. By conducting a compression test and finite element analysis based on the block and grouted concrete strength, it attempted to determine the compression capacity of the form block that can be used in new construction and seismic retrofit. As a result, the comparison of the strength equation from Architectural Institute of Japan to the prism compression test showed that the mortar coefficient of 0.55 was suitable instead of 0.75 recommended in the equation. The stress-strain relation of the block was proposed as a bi-linear model based on the compression test result of the single form block. Using the proposed model, finite element analysis was conducted on the prism specimens, and it was shown that the proposed model predicted the compression behavior of the form block appropriately.

• The Korean Journal of Pain
• /
• 제7권2호
• /
• pp.217-221
• /
• 1994

Percutaneous neurolysis of upper thoracic sympathetic ganglion was performed in 40 patients by simultaneously injecting 3 ml of pure alcohol into the T2 and T3 levels after 3 ml of injection of local anesthetic agent on the same sites. Using a skin temperature probe, finger tip temperatures were measured on the index finger ipsilateral to the nerve block before block, 15 and 30 minutes after test block, and 30 minutes after alcohol block. Alcohol block was performed immediately after 30 minutes test block. Finger tip temperatures obtained at 30 minutes post alcohol block and test block and the differences in the temperatures measured before and 30 minutes after alcohol block were shown to be statistically important as potential indicators for prediciting long term outcome of therapy for palmar hyperhidrosis using this technique. These results demonstrate that the palmar temperature monitoring method is sufficiently sensitive to predict the outcome of nerve block during and after thoracic sympathetic ganglion block.

• Journal of the Korean Wood Science and Technology
• /
• 제47권1호
• /
• pp.51-65
• /
• 2019

A wood-plastic composite (WPC) paver block was manufactured using wood chips waste through an extrusion process, and it was intended to be used for paving in basic rest areas. The first stage in this study covered preliminary tests in terms of flexural strength and dimensional swelling to determine the optimal WPC compounding mix condition, by variation of the WPC ingredients. Next, three different paver blocks including the WPC block, a non-porous cement block, and a porous cement block were tested in terms of various material properties in the laboratory. Finally, two outdoor test sections of the proposed paver blocks were prepared to simulate a basic rest area. Test results indicated that the flexural strength of the WPC paver blocks was about 1.6 times greater than that of the tested cement paver blocks. The WPC block pavement was unaffected by water buoyance as well as volume expansion due to swelling. Results from the impact absorbance test and light falling weight deflectometer (LFWD) test clearly showed that the WPC block paving system marginally satisfied the comfortable and safe hardness range from the pedestrians' perspective, while the results demonstrated that it is structurally sound for application as a road paving block.

• 한국자동차공학회논문집
• /
• 제16권6호
• /
• pp.115-120
• /
• 2008

There are many typesof accelerometer sensor. There was mainly used high-g accelerometer to obtain data for vehicle in crash test. Accelerometer was mounted on test vehicle with mounting blocks. Test result can be influenced by condition of mounting i.e. bonding material and type of block. These influences can be evaluated to variation of sensitivity in calibration test. In this paper, Calibration test were carried out for 3 types of bonding material i.e. stud, beewax and double side tape. Other factor was taken into consideration by 3-types for mounting block. All test was conducted by sinusoidal signal vibrator up to 4500Hz. In order to investigate influence for sensitivity from different input voltage in the calibrator, the same test was repeated. Test results were compared with standard accelerometer data. Relative sensitivities and phases were showed small difference in sensitivity for bonding materials with one block, but significant one for another block and different input voltage below 1000Hz.

• 한국국방경영분석학회지
• /
• 제27권2호
• /
• pp.124-133
• /
• 2001

The purpose of this study is investigate the differences among parametric and nonparametric test statistics for the tree alternative hypothesis in the randomized block design. As the results, it was found that there was no large differences among parametric and nonparametric test statistics in power when the block sizes were larger, and Hollander's statistic had better power than other nonparametric test statistics. It is recommended that Hollander's test statistic is more useful method when we have no information about the distribution of population.

• 한국안전학회지
• /
• 제24권5호
• /
• pp.43-47
• /
• 2009

Armor block is used to reduce wave energy. To do this, the stability of coastal structure is enhanced. It is very expensive to develop a new type armor block. So, the research of new type armor block is very short. We develope truncated tetrahedron type armor block(new type block) which have a hole in center part. In this study, the stability of new type armor block is investigated by hydraulic model test. In the result, the stability coefficient($K_D$) of new type armor block is 11.8. this value is more superior than value of tetrapod.

• Journal of the Korean Data and Information Science Society
• /
• 제13권2호
• /
• pp.175-184
• /
• 2002

In this paper, diallel crosses block designs for control versus test comparisons among the lines are proposed. These block designs are constructed by using partially balanced incomplete block designs with C-properties. Also, the efficiencies of the diallel crosses block designs obtained through this method are tabulated for number of lines 22 or less.

• 한국환경복원기술학회지
• /
• 제7권6호
• /
• pp.19-28
• /
• 2004

Segmental Retaining Wall(SRW) has been variously applying in Civil and Architecture construction. Recently, the application of environmental element in all type's structures came to essential requirement, and the construction cases of retaining wall using reinforced soil and block are more increased than the past. But, this trend more widely was spread environmental element as landscape work for the backside of reinforced retaining wall as well as block itself. New environmental block, Greenstone Block, developed to apply of this tendency. The retaining wall system using Greenstone can be environmental constructing at both block itself and backside of retaining wall. The material tests, the axial compressive strength test of block and bending test of fiber-pipe, exercised to design and construction of vertical SRW, which were satisfied NCMA standard. Through this procedure, Rewall (ver 1.0) was developed, which can be automation design of SRW including internal stability, external stability and local stability. And these can be considered setback of retaining wall, as well the examples of vertical retaining wall using block presented to satisfying the follows; strength of reinforced geotextile, height of retaining wall, surcharge, types of backfill and groundwater level etc. Many problems investigated on after or before of construction were due to local failure, insufficiency of bearing capacity and groundwater level. Especially, the local failure was many occurred to during compaction or after construction, and the cases of SRW construction is similar to the results of model test on vertical SRW.