• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.10
• /
• pp.365-370
• /
• 2014

Although Internet of Things already became a new paradigm on service on network, we should pay more effort for studying about its testing method, since humans, things and environments in IoT are connected to each other without any restrictions. Earlier researches based on emulators showed that such virtual devices on emulators had unavoidable gap between them and real things. Furthermore, growth of connection complexity between the devices and loosing of restrictions make the gap wider. Accordingly, in this paper, we suppose a method of test coverage measurement based on BitTorrent for IoT environment. It has cooperation features among homogeneous devices with avoiding the overlapping on each part of whole test process.

• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.325-328
• /
• 2001

This paper describes a VHDL code coverage checker for If design and verification. Applying the verification coverage to IP design is a methodology rapidly gaining popularity. This enables the designers to improve the IP design quality and reduces the time-to-market by providing the Quantitative measure of simulation completeness and test benches. To support this methodology, a VHDL code coverage model was defined and the measurement tool was developed.

• Journal of Satellite, Information and Communications
• /
• v.7 no.1
• /
• pp.86-91
• /
• 2012

This paper described validation results of COMS Ka band antennas beam coverages which were developed by ETRI. After satellite launch, In Orbit Test(IOT) activities are stat to check spacecraft and payloads are still in healthy condition after launch. During IOT phase, ETRI measured radiation patterns of COMS Ka band antennas and compare with ground test(CATR) results. The antenna patterns similarity between IOT results and CATR results show that COMS Ka band antenna withstand launch vibration and in the good healthy condition. After IOT, ETRI performed field test for beam coverage measurements with vehicle to check if Ka band beam coverage are formed well as designed. For the beam coverage measurement, 17 points were selected over the Korean peninsula. The field measurement data were very similar with CATR data and this confirms that beam coverage are formed well over the Korean peninsula as expected.

• KIPS Transactions on Software and Data Engineering
• /
• v.11 no.7
• /
• pp.273-282
• /
• 2022

Testing approaches for configurable software product lines differs significantly from a single software testing, as it requires consideration of common parts used by all member products of a product line and variable parts shared by some or a single product. Test coverage is a measure of the adequacy of testing performed. Test coverage measurements are important to evaluate the adequacy of testing at the software product line level, as there can be hundreds of member products produced from configurable software product lines. This paper proposes a method for measuring code coverage at the product line level in configurable software product lines. The proposed method tests the member products of a product line after hierarchizing member products based on the inclusion relationship of the selected features, and quantifies SPL(Software Product Line) test coverage by synthesizing the test coverage of each product. As a result of applying the proposed method to 11 configurable software product line cases, we confirmed that the proposed method could quantitatively visualize how thoroughly the SPL testing was performed to help verify the adequacy of the SPL testing. In addition, we could check whether the newly performed testing for a member product covers the newly added code parts of a feature.

• Journal of Preventive Medicine and Public Health
• /
• v.55 no.6
• /
• pp.559-567
• /
• 2022

Objectives: This study aimed to assess the effect of complete coverage and content of available antenatal care (ANC) on the incidence of low birth weight (LBW) in 4 countries belonging to the Association of Southeast Asian Nations (ASEAN). Methods: Measures of complete coverage and content of ANC services included the frequency of ANC visits and the seven service components (blood pressure measurement, iron supplementation, tetanus toxoid immunization, explanations of pregnancy complications, urine sample test, blood sample test, and weight measurement). The complete coverage and content of ANC services were assessed as high if more than 4 ANC visits and all seven components were delivered. Multivariable logistic regression with complex survey designs was conducted using Demographic Health Survey data from the 4 ASEAN countries in question from 2014 to 2017. Results: The proportion of LBW infants was higher in the Philippines (13.8%) than in Indonesia (6.7%), Cambodia (6.7%), or Myanmar (7.5%). Poor ANC services were associated with a 1.30 times higher incidence of LBW than a high level of complete coverage and content of ANC services (adjusted odds ratio [aOR], 1.30; 95% confidence interval [CI], 1.11 to 1.52). In addition, the risk of LBW was higher in the Philippines than in other countries (aOR, 2.25; 95% CI, 2.01 to 2.51) after adjusting for mothers' demographic/socioeconomic factors, health behaviors, and other factors. Conclusions: In sum, complete coverage and content of ANC services were significantly associated with the incidence of LBW in Indonesia, Cambodia, and Myanmar. The Philippines did not show statistically significant results for this relationship, but had a higher risk of LBW with poor ANC.

• Journal of Digital Convergence
• /
• v.11 no.11
• /
• pp.85-94
• /
• 2013

This paper presents a novel mobile measurement system with multi antennas which enable mobile measurement as well as fixed measurement with telescope mast. Proposed system installed 4 omni directional antennas for the space diversity process and one directional log periodic antenna for the simultaneous conventional fixed measurement. Whole antenna systems are connected to the custom DTV channel analyzers with Ethernet networks respectively and processed by the main controller to calculate real time average receive levels. To prove the performance of proposed system, the typical receive models are categorized as 3 area types - open area, building area and house area, and then intensive field tests were performed through mobile and fixed measurement phases. With these measurement data, the relationships between mobile and fixed measurement are analyzed, and the concept of compensation factor is proposed to assume the average receive level of signal. The field test is fulfilled as a co-work with public broadcasters and the proposed system is applied to the intensive coverage measurement projects for metropolitan areas by the korean government agencies.

• Journal of Advanced Navigation Technology
• /
• v.24 no.3
• /
• pp.212-217
• /
• 2020

Recently, with the interest in the 4th industrial revolution, the demand for autonomous driving technology is increasing. V2X communication technology is a core technology for autonomous vehicles that exchanges information with objects such as vehicles, infrastructure, networks, and pedestrians through wired and wireless networks. In this paper, we present the results of the hybrid V2X communication system, which is a hybrid design of WAVE and LTE, and the coverage test to confirm the performance of the system. Through coverage measurement, we show that the hybrid V2X communication performance is superior to the existing LTE or WAVE single communication system in communication coverage, so it can be effectively applied to autonomous driving services.

• The Korean Journal of Applied Statistics
• /
• v.29 no.1
• /
• pp.171-180
• /
• 2016

Basel committee suggests using Value-at-Risk (VaR) and expected shortfall (ES) as a measurement for market risk. Various estimation methods of VaR and ES have been studied in the literature. This paper compares semi-parametric methods, such as conditional autoregressive value at risk (CAViaR) and conditional autoregressive expectile (CARE) methods, and a Gaussian quasi-maximum likelihood estimator (QMLE)-based method through back-testing methods. We use unconditional coverage (UC) and conditional coverage (CC) tests for VaR, and a bootstrap test for ES to check the adequacy. A real data analysis is conducted for S&P 500 index and Hyundai Motor Co. stock price index data sets.

• Journal of Broadcast Engineering
• /
• v.12 no.1 s.34
• /
• pp.11-27
• /
• 2007

T-DMB(Terrestrial-Digital Multimedia Broadcasting) for portable and mobile broadcasting service was officially launched in the metropolitan area of Korea in December 2005. The development of interactive data services and the expansion of T-DMB network have been now progressed, and the regional T-DMB broadcasters will be selected in the near future. Although it is important to evaluate service area and reduce a fringe area for optimizing RF coverage of T-DMB, there was no professional system to support those works, and therefore lots of resources in budget, manpower and time were required. The measurement considering characteristics of SFN(Single Frequency Network) is essential in the implementation of T-DMB network which needs to control synchronization, spacing and output power of transmitters. In addition, mobile measurement, enough measured parameters for many-sided analysis of reception quality, efficient management of enormous measured data and representation of measured results on the electronic map are also important in evaluating service area. In this paper, we derived requirements for a new measurement system in T-DMB by considering the above details, and we proposed and developed an integrated measurement and analysis system. The developed system was applied to the implementation of T-DMB network of KBS and field tests, and it proved its efficiency and accuracy in result.

• Journal of Soil and Groundwater Environment
• /
• v.18 no.5
• /
• pp.15-25
• /
• 2013

In this study, two kinds of soil-based proficiency testing materials (PTMs), NICE-012L and NICE-012R were prepared and certified for Benzen, Toluene, Etylbenzene and Xylene with evaluation of uncertainties. In order to analyse BTEX (Benzen Toluene Etylbenzene Xylene) for the candidate materials, GC/MS was used after pretreatment according to methods of soil analysis by Ministry of Environment. For the homogeneity test among bottles in terms of candidate materials, ISO 13528 and IUPAC Protocol were used and according to the result, both candidate materials showed sufficient homogeneity. Also, the stability test over the candidate materials was accessed according to the ISO Guide 35 by classifying short-term and long-term stability and the result showed that both candidate materials showed decent stability. The reference values of the two candidate materials depending on BTEX components were derived from the average of the 11 samples that were used for verification of the samples' homogeneity. Uncertainty of measurement was combined by uchar that was caused by a characteristic value, $u_{bb}$ that was caused by between-bottle homogeneity, and $u_{stab}$ that was caused by stability, and then combined uncertainty ($u_{PTM}$) was multiplied to the coverage factor (k) derived from the effective degree of freedom from each factor that leads to expanded uncertainty (U) in about 95% of confidence level. The proficiency testing materials developed through this study were supplied to National Institute of Environmental Research (NIER) and utilized as an external proficiency testing materials for evaluating analysis capacity of soil agencies with specialty in terms of soil analysis approved by Minister of Environment.