• Journal of the Korean Society for Railway
• /
• v.9 no.4 s.35
• /
• pp.419-424
• /
• 2006

In this paper we study on a method to predict and to demonstrate the reliability of the Korea high speed train control system in quantitative point of view. For the prediction of the reliability in train control system which is composed of electronic parts, Relax Software 7.7 automation tool is employed and MIL-HDBK-217 Handbook that is a standard for the prediction of the failure rate in electronic components is used. Mean Time Between Failure (MTBF) is predicted based on the failure rate of the subsystems, State Modeling and Markov Modeling method is used to express a reliability function of the train control system composed by hardware redundancy as a function of time. We propose a Reliability Test which is performed on the level of the subsystems and Failure Report, Analysing, Correction action system which use the test operation data to prove the predicted reliability.

• Proceedings of the KIEE Conference
• /
• 2002.11b
• /
• pp.265-267
• /
• 2002

In this paper, the communication between Over-Current Relay agents is realized using DNP(Distributed Network Protocol), which is the standard communication protocol of distribution automation system in KEPKO. The key words in OCR agent communication are defined and represented by use of DNP application function code. And the DNP index for OCR agent is defined. The proposed communication scheme is tested by use of Communication Test Harness, a test tool for DNP protocol to show its soundness.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.52 no.9
• /
• pp.506-512
• /
• 2003

In this paper, a communication module between Relay agents in a multi-agent system based power distribution network protection system is realized using DNP3.0(Distributed Network Protocol), which is the standard communication protocol of distribution automation system in KEPCO. The key words for agent communication in the multi-agent based protection system are defined and represented by use of DNP application function code. The communication module developed based on the proposed communication scheme is tested by use of the Communication Test Harness, a test tool for DNP protocol, then used to the multi-agent system based power distribution net work protection system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.2
• /
• pp.111-119
• /
• 2015

Smart Grid is a next-generation intelligent grid to optimize energy efficiency by integrating information and communication technologies to the existing power grid as a two-way exchange of information. HPGP communication standard for smart grid implementation has been developed for the emerging smart energy, home automation, electric vehicle communications applications. HPGP communication standard has the advantage of reducing cost and power consumption. Also, it can be interoperated with the previous HPAV communication standard. For the introduction of a new communication standard, the analysis of the reliability and interoperability verification is required. In this paper, we present sniffer test method as reliability test method about power line communication between PEV(Plug-in Electric Vehicle) and EVSE(Electric Vehicle Supply Equipment). Power line communication between PEV and EVSE is one of the most important Smart Gird applications. Also, we analyzed sniffer test results about power line communication based on HPGP between PEV and EVSE by using QCA7000 device, AVitar and Tool kit.

• The KIPS Transactions:PartD
• /
• v.17D no.6
• /
• pp.423-430
• /
• 2010

As software becomes large-scale and complicated, the need for Quality Assurance and management is increased and software testing is becoming more important. The main aims of software testing are not only detecting and handling the defects in the system but also investigating and managing the present system. But automatic testing tools require lots of time and efforts to detect and manage the risk in the system because test-cases used in the general automatic testing tools have the simply static information. In this thesis, the dynamic management technique for weighted testcases is designed to test the high-risk testcases preferentially by giving the testcases dynamic weight.

• Journal of Advanced Navigation Technology
• /
• v.23 no.5
• /
• pp.361-366
• /
• 2019

In developing the avionics system, a system integration laboratory (SIL) is established to verify the function and interworking of individual components. In case of individual verification of SIL's components and system integration, a SIL model that simulates the function and interworking of each equipment is developed and used. A SIL model shall be pre-verified against all data defined in the interface control document (ICD) before interworking with the actual equipment and reverified even when the ICD changes or functions change. However, if the verification of the SIL model is performed manually, the verification of the individual SIL model takes considerable time. For this reason, selective regression tests are often performed to determine a impact of SIL models on ICD changes and some functional changes. In this paper, we designed SIL model verification automation method to perform regession test by reducing verification time of SIL model and verify the usefulness of verification automation design by developing SIL model verification automation tool.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.10
• /
• pp.892-897
• /
• 2017

As the weapon system SW development and management manual of the DAPA, which is the regulation for the overall weapon system SW development, is revised, the level and scope of SW reliability test are upgraded to improve the reliability and quality of SW. It is a big burden for SW developers. In particular, the dynamic test requires a schedule and manpower required to implement the weapon system SW, and should be performed every time the source code changes, not just one time. In this paper, we propose a regression test automation program(VectorCast Environment Manager) that performs a dynamic test using VectorCast, a dynamic test tool, and then performs a regression test automatically by minimizing human intervention in the regression test of dynamic test due to the change of the source code.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.7
• /
• pp.126-136
• /
• 1997

This paper describes a task level cell programming environment that deals with difficulties in programming Flexible Manufacturing Cells (FMCs), and consists of the cell programming editor and the automatic generation module. In the cell programming editor, cell programs can be developed with task- oriented cell specifications that reduces the amount of details to be considered by cell programmers. The automatic generation module transforms task specifications into executable programs used by cell constituents. The development tool in designing the environment is an object-oriented approach which provides a simple to use and intuitive user interface, and allows for an easy development of object models associated with the environment. Test results are illustrated in order to demonstrate the applicability of the developed envifonment.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.153-158
• /
• 2000

This paper addresses an intelligent robot control system using an off-line programming to teach a precise assembly task of electronic components in a flexible way. The investigated task consists of three job: heat caulking test, soldering on a circuit board, and checking of soldering defects on the back cover of a camera. This study investigates the remodelling of the most complicated cell in terms of the accuracy and fault rate among the twelve cells in a camera back-cover assembly line. We have attempted to enhance back-cover assembly line. We have attempted to enhance soldering quality, to add task flexibility, to reduce failure rate, and to increase product reliability. This study modifies the cell structure, and improves the soldering condition. The developed all system implements the real-time control of assembly with vision data, and realized an easier task teaching on off-line programming.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07b
• /
• pp.382-384
• /
• 2005

임베디드 소프트웨어는 다른 일반 시스템과는 여러 가지 다른 특성을 가지고 있다. 우선 프로세서 자원과 메모리 자원을 적게 사용해야 하며, 소프트웨어의 오류에 대해 데스크 탑 또는 기타 서버환경에 비해 확실한 소프트웨어의 검증을 요구한다. 이러한 소프트웨어의 검증은 임베디드 소프트웨어의 오류허용이 다른 환경에 비해서 매우 다르기 때문에 고난도의 임베디드 소프트웨어의 응용을 빠르고 안정되게 개발하기 위해서는 사용자가 쉽게 사용할 수 있는 기술이 절실히 필요한 실정이다. 본 논문에서는 기존의 테스팅 자동화도구의 핵심 이슈인 테스트 데이터 제너레이터와 테스트 스크립트의 기능을 포함한 모듈인 테스트슈트 제너레이터의 성능향상 위한 방법을 제시한다. 제시된 테스트슈트 제너레이터 모듈은 임베디드 소프트웨어 테스팅 자동화도구의 개발 시 활용하여 개발한다면 임베디드 소프트웨어를 보다 효과적으로 테스팅 할 수 있을 것으로 예상된다.