• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.10a
• /
• pp.77-82
• /
• 2000

In this study, an automation assembly jig for the automation assembly process for the ventilation grille that is used in the interior of a car is developed. As the method that can do the automation assembly for the ventilation grille, a simple jig and air cylinder have been applied. And a solenoid valve, a filter regulator, and on-off switch have been used in controlling the system. Moreover, the timer is attached to the equipment so that a worker may control the assembly time, as fitting the quantity on demand of production. Actually with executing the assembly test productivity and performance of assembly have been verified. In case of the automation assembly work for a ventilation grille is compared to the manual work. The optimum working speed has been identified to make the process twice or three times better.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.7 s.172
• /
• pp.122-129
• /
• 2005

Shoe with leather upper such as safety and golf shoe requires a roughing process where the upper is roughed fur helping outsole to be cemented well. It is an important and basic process for production of leather shoe but is not automated yet. Thus, there are problems that the defect rate is high and the quality of roughed surface is not uniform. In order to solve such problems, the interest in automation of roughing process is being increased and this paper introduces CAM system for 5-axis automatic roughing machine as one part of automation of roughing process. The CAM system developed interpolates a B-spline curve using points measured from the Roughing Path Measurement System. The B-spline curve is used to generate the tool path and orientation data fer a roughing tool which has not only stiffness but also flexibility to rough the inclined surface efficiently. For productivity, the upper of shoe is machined by side of the roughing tool and tool offset is applied to the roughing tool for machining of inclined surface. The generated NC code was applied to 5-axis polishing machine for the test. The upper of shoe was roughed well along the roughing path data from CAM and the roughed surface was proper fur cementing of the outsole.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.2
• /
• pp.140-144
• /
• 2009

The efficient test tool is indispensable to the test driven development. The test tool is very helpful to get the advantage of the test driven development. Many traditional automation test tool does not support standard script language and are not suitable to unit test. In traditional unit test tool, a code for the test is added at the source code. Such method makes the complexity of a source code and has a problem which must modify many part of the source code when the test case is changed. In this paper, we present a design technique of a flexible unit testing tool which makes a developer can modify easily the test case by using the standard java script in test driven development. We implement the test tool by this design technique to verify the availability of this technique.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.66 no.3
• /
• pp.110-116
• /
• 2017

System to automate the trial-run of energy storage system for frequency regulation was developed and demonstrated. Basic strategy was developed on the basis of trial-run procedure and verified in the computer simulation tool. The algorithm was developed and coded for 4MW trial-run automation system. 4MW trial-run automation system was connected to 4MW energy storage system for frequency regulation in Jocheon substation of Jeju city and demonstrated. 24MW trial-run automation system was developed on the basis of 4MW trial-run automation system and verified by operation system for 24MW energy storage system for frequency regulation. The operation system has own simulation model of energy storage system and power system. The verification was performed to improve the system in the view of user. 24MW trial-run automation system was demonstrated in 32MW Ul-san and 36MW Non-gong energy storage system. All tests of trial-run was done by manual and first they ware taken 1 week with no trial-run automation system. The manual trial-run tests were taken by maximum three times. Trial-run test by trial-run automation system was taken 2 days. The system helps reduce the trial-run test period and improve the accuracy of tests.

• Journal of KIISE:Software and Applications
• /
• v.36 no.1
• /
• pp.10-20
• /
• 2009

As unit testing should be performed repeatedly and continuously, it is a high-cost software development activity. Although there are many studies on unit test automation, there are less studies on automated test case generation which are worthy of note. In this paper, we discuss a study on automated test data generation from source codes and indicate algorithms for each stage. We also show some issues of test data generation and introduce an automated test data generating tool: CUTIG. As CUTIG generates test data not from require specifications but from source codes, software developers could generate test data when specifications are insufficient or discord with real implementation. Moreover we hope that the tool could help software developers to reduce cost for test data preparation.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.6
• /
• pp.169-176
• /
• 2010

Substation Automation System is basically operating throughout communicative services among IEC 61850 based devices. So, minimum requirement in order to install the system in the substation is to verify server and client conformance of IEDs and HMIs according to the IEC 61850 standard. Even though UCA IUG issued IEC 61850 conformance test procedures for both the server and the client, Much of the test is limited to IEDs as server and there is no client-only testing tool except KEMA server test tool sets. this study aims to develop IEC 61850 client testing system for verifying the full communication conformance of the substation automation system and this paper describes the design and implementation of the testing system.

• The KIPS Transactions:PartD
• /
• v.15D no.3
• /
• pp.347-354
• /
• 2008

In order to enhance the productivity of mobile and develop reliable software, the test of mobile application software should be required absolutely. The most important way to communicate to users has been used to GUI. But GUI test method in mobile has no the test automation system except manual test by checklist. In this paper we present a test method and tool by image flow to reduce the time required and finds out errors to GUI, by carrying out the study on automatic GUI testing tool based on image flow to GUI test of mobile application.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.716-717
• /
• 2011

This paper presents the overview of development of substation automation system. The prototypes of SA system are developed in first phase, and being enhanced the performance in second phase. In this research, the project was classified into three projects which are the development of intelligent electronic devices, the development of operation system and communication network in substation, and the development of technology to verify the compatibility of IEC 61850. As a result of this research, the domestic-made SA system are operated and tested for the performance in 154kV substation and/or test-bed in KEPCO PT Center.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.5
• /
• pp.123-130
• /
• 2006

In manufacturing, process automation and parameter optimization are required in order to improve productivity. Especially in welding process, productivity and weldablity should be considered to determine the process parameter. In this paper, optimization methodology was proposed to determine the welding conditions using the objective function in terms of productivity and weldablity. In order to conduct this, welding experiments were carried out. Tensile test was performed to evaluate the weldability. Neural network model to estimate tensile strength using the laser power, welding speed, and wire feed rate was developed. Objective function was defined using the normalized tensile strength which represented the weldablilty and welding speed and wire feed rate which represented the productivity. The optimal welding parameters which maximized the objective function were determined.

• International Journal of Precision Engineering and Manufacturing
• /
• v.6 no.2
• /
• pp.26-33
• /
• 2005

In this paper, the tube forming by radial-forward extrusion is analyzed by numerical simulation and experiments. The paper discusses the effect of process variables such as gap height, relative gap width and die comer radius on tube forming. The influence of deformation patterns of flange in radial extrusion on forward extrusion for tube forming is investigated and summarized in terms of the maximum forming force and hardness variations along the extrusion path. Furthermore the external defects are shown experimentally during the forming operation. Based on finite element analysis in conjunction with experimental test in Al alloy, analysis is performed for important parameter combination in order to reduce forming defects. Eventually, the process parameters for safe forming are suggested in order to reduce the forming defects.