• Journal of Korean Neurosurgical Society
• /
• 제30권4호
• /
• pp.493-500
• /
• 2001

Objective : Anterior cervical locking plates are the devices for achieving anterior cervical spinal fusion. This study was conducted to evaluate the locking plate system regarding its long-term advantages and disadvantages in the view of interbody fusion rate, hardware-related failures, vertebral change close to the fusion segment and postoperative complications. Method : Eight-six patients, operated from Jan., 1996 to Jun. 1998, were followed-up for more than two years. All of the cases were fused with iliac bone graft and ORION locking plate(Sofamor Danek USA, Inc., Memphis, TN) fixation. The patients were discharged or transferred to rehabilitation department 2-7 days after operation. A comprehensive evaluation of the interbody fusion state, instrument failure, vertebral change and postoperative complications were made by direct interview and cervical flexion-extension lateral plain films. Results : There were 55 male and 31 female with a mean age of 45 years(18-75 years). The mean follow-up period was 29 months(24-43 months). Various disorders that were operated were 40 cervical discs, 6 cervical stenosis including OPLL, 2 infections, and 38 traumas. Fusion level was single in 59 cases, two levels of each disc space in 15 cases, and two levels after one corpectomy in 12 cases. There was no instrument failure. Pseudoarthrosis was observed in two cases(2%) without radiological instability. The other patients(98%) showed complete cervical fusion with stable instrument. Mild settling of interbody graft with upward migration of screws was found in 12 cases(14%). Anterior bony growth at the upper segment was found in 5 cases(6%). Postoperative foreign body sensation or dysphagia was observed in 12 cases(4%), and disappeared within one month in 7 cases and within six months in 4 cases. One patient complained for more than six months and required reoperation to remove paraesophageal granulation tissue. Conclusion : The results show that Orion cervical locking plate has some disadvantages of upward migration of screws, anterior bony growth at the upper segment, or possibility of esophageal compression even though it has advantages of high interbody fusion rate or low instrument failure. Author believe that anterior cervical locking plate in the future should be thinner, and should have short end from the screw hole, and movable screw with adequate stability.

• 지질공학
• /
• 제1권1호
• /
• pp.11-18
• /
• 1991

본 고는 특정 흙에서의 가설 흙막이용 SCW의 미경화현상 원인을 실험적으로 규명하며 성공적으로 현장 시공한 사례를 소개하고자 한다. 시험은 현장 흙을 채취하여 현장 배합비와 변경된 배합비 및 특정약액의 추가에 따른 SCW의 강도특성 변화를 실내 측정하였다. 그 결과 SCW 미경화 현상의 원인은 현장의 유기질토에 기인된 것으로 나타났으며, 이에 대한 대책으로 염화칼슘 2% 첨가시 가장 효과적인 것으로 나타났다. 그러나 염화칼슘의 배합비르 4%, 6%로 증가시킨 경우에는 오히려 강도가 저하되는 특이한 현상을 나타내었다. 또한 pH가 13이 되도록 NaOH를 첨가한 경우에는 오히려 강도가 저하하였고, NaSiO$_2$를 첨가한 경우는 조기 강도는 어느 정도 발현된 반면, 장기 강도는 감소되는 현상을 보였다.

• Journal of Applied Biological Chemistry
• /
• 제50권1호
• /
• pp.6-12
• /
• 2007

Feasibility of laboratory-synthesized zerovalent iron was investigated to remove arsenic from leachates of tailings taken from an Au-Ag abandoned mine. The tailings were seriously contaminated with arsenic, and its potential adverse effect on the ecosystems around the mine seems to be significantly high. Long-term column experiments were conducted for about 3.5 months to evaluate the effectiveness of the synthesized zerovalent iron for removal of arsenic. Over than 95% removal efficiency of As was observed in the zerovalent iron mediated tests. In addition, the XRD data suggest that the corrosion products of ZVI were identified magnetite, maghemite, goethite, and lepidocrocite, all of which support Fe(II) oxidation as an intermediate step in the zerovalent iron corrosion process. The results indicate that arsenic can be removed from the tailing-leachate by the mechanism of coprecipitation and/or adsorption onto those iron oxides formed from ZVI corrosion.

• 상하수도학회지
• /
• 제20권1호
• /
• pp.44-52
• /
• 2006

Bio-filtration processes using honeycomb tubes (process 1) and aeration and manganese-sand filtration (process 2) were evaluated for the biological manganese removal efficiency. The concentration of manganese at effluent was stabilized after 20days operation in process 1. It was estimated the required time for attaching and growing microorganisms to honeycomb tubes. In long term of operation periods, manganese removal efficiency was dropped for the excessively attached biofilm and manganese dioxide to honeycomb tubes. It took several days for normal operation in process 2, after that manganese removal efficiency was increased to 98% and stabilized for 1.5 years. Microorganisms in process 1 and 2 were isolated and cultured to characterize manganese-oxidizing bacteria. Among the four types of colony, light brown colony was turned blue color by leuco crystal violet spot test. Stenotropomonas genus, known as manganese-oxidizing bacteria, was identified by 16S rDNA partial sequencing analysis which was isolated in process 1 and 2. For the biological treatment to remove manganese, these two considerations are important. One is to choose the proper media attaching manganese oxidant, another one is to define the cultural condition of isolated manganese-oxidizing bacteria.

• 한국환경복원기술학회지
• /
• 제6권6호
• /
• pp.86-95
• /
• 2003

The object of this paper is to correct check the tree situation and quantity around highway. Also, those data utilize in order to establish plan about how to the long and short term landscape construction and maintain program. The result of this study can be summarized as follows; 1. Tree decrease rates for 8 branch offices were Jongbu(5.62%), Gangwon(4.32%), Chungcheong (3.35%), Honam(5.62%), Gyeongbuk(3.06%), Gyeongnam(5.60%), Seorak training center(0.31%), Headquarter(1.54%). Also decrease causes were traffic accidents(1.8%), air po11ution(4.7%), humid damage(0.9%), insect and disease(1.2%), wind and rainfall(3.4%), dry damage(3.5%), cold damage (1.0%), fire(3.1%), damage of the man and anima1(4.1%), remove bad tree(13.1%), bad rooting(9.5%) and etc.(53.7%). 2. Improve methods of tree death problems were regulation management(ferti1ize, irrigation and pesticide work), improvement of draining system, Pull out the weeds, Plant native plants, utilize organic matter fertilize and plant environment trees.

• 한국임상수의학회지
• /
• 제23권3호
• /
• pp.375-379
• /
• 2006

Detection of wooden foreign body represents a clinical challenge. Wood is typically radiolucent, so wooden foreign bodies are generally cannot be seen on survey radiography. Failure to locate and remove foreign bodies can lead the patient to the long-term secondary inflammatory reactions or infections. The dog described in the present report ingested a wooden foreign body(cotton swab stick) a year ago. The foreign body remained in the intestinal tracts which were attached to each other due to the prior abdominal operation. The wooden piece in the intestine functioned as a nidus and inorganic matters were gathered forming calculus on the outer layer of foreign body. In the radiograph, the foreign body appeared to be a chicken bone which of it's inner area was more radiolucent than the outer layer. Because the wooden foreign bodies that have remained for long time in the intestinal tract can be seen like a bone by mineralization, the diagnosis of the wooden foreign bodies should be done prudently.

• Journal of Microbiology and Biotechnology
• /
• 제12권3호
• /
• pp.377-381
• /
• 2002

Recently, interests to remove nitrogen in the nitritation process have increased because of its economical advantages, since it could be a short-cut process to save both oxygen for nitrification and carbon for denitrification compared to a typical nitrification. However, the kinetics related with the nitritation process has not yet been fully understood. Furthermore, many useful models which have been successfully used for wastewater treatment processes cannot be used to estimate effluent nitrite concentration for evaluating performance of the nitritation process, since the process rate equations and population of microorganisms for nitrogen removal in these models have been set up only for the condition of full nitrification. Therefore, the present study was conducted to estimate an effluent nitrite concentration in the nitritation process with a concept of enzymatic inhibition kinetics based on long-term laboratory experiments. Using a nonlinear least squares regression method, kinetic parameters were accurately determined. By setting up a process rate equation along with a mass balance equation of the nitrite-oxidizing step, an effluent nitrite concentration in the nitritation process was then successfully estimated.

• Journal of Multimedia Information System
• /
• 제7권3호
• /
• pp.231-238
• /
• 2020

This work presents a fully analog baseline wander tracking and removal circuitry using high-pass filter (HPF) based R-peak detection and quadratic interpolation that does not require digital post processing, thus suitable for compact and low power long-term ECG monitoring devices. The proposed method can effectively track and remove baseline wander in ECG waveforms corrupted by various motion artifacts, whereas minimizing the loss of essential features including the QRS-Complex. The key component for tracking the baseline wander is down sampling the moving average of the corrupted ECG waveform followed by quadratic interpolation, where the R-peak samples that distort the baseline tracking are excluded from the moving average by using a HPF based approach. The proposed circuit is designed using CMOS 0.18-㎛ technology (1.8V supply) with power consumption of 19.1 ㎼ and estimated area of 15.5 ㎟ using a 4^th order HPF and quadratic interpolation. Results show SNR improvement of 10 dB after removing the baseline wander from the corrupted ECG waveform.

• 한국광학회지
• /
• 제21권4호
• /
• pp.146-150
• /
• 2010

디지털 홀로그래피에서 재생상을 재생할때 복소공액 홀로그램을 도입하여 위상 왜곡과 잡음이 제거된 재생 영상을 얻는 방법에 대하여 연구하였다. 일반적으로 디지털 홀로그램은 시료의 위상 정보 외에 위상 정보에 겹쳐져 있어 잡음으로 작용하는 허상, DC항 뿐만 아니라 측정 시스템의 위상 왜곡 현상도 모두 포함되어 기록된다. 기록된 홀로그램에서 시료의 위상 정보만을 분리하여 이를 재생하면 질 좋은 위상 재생상을 얻을 수 있다. 본 연구에서는 복소공액 홀로그램을 이용하면 off-axis 및 in-line 홀로그래피에서 위상왜곡과 측정시스템이 가지고 있는 잡음을 제거 할 수 있음을 실험적으로 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제15권10호
• /
• pp.831-837
• /
• 2002

Scaled SONOS transistors have been fabricated by 0.35$\mu\textrm{m}$ CMOS standard logic process. The thickness of stacked ONO(blocking oxide, memory nitride, tunnel oxide) gate insulators measured by TEM are 2.5 nm, 4.0 nm and 2.4 nm, respectively. The SONOS memories have shown low programming voltages of ${\pm}$8.5 V and long-term retention of 10-year Even after 2 ${\times}$ 10$\^$5/ program/erase cycles, the leakage current of unselected transistor in the erased state was low enough that there was no error in read operation and we could distinguish the programmed state from the erased states precisely The tight distribution of the threshold voltages in the programmed and the erased states could remove complex verifying process caused by over-erase in floating gate flash memory, which is one of the main advantages of the charge-trap type devices. A single power supply operation of 3 V and a high endurance of 1${\times}$10$\^$6/ cycles can be realized by the programming method for a flash-erased type EEPROM.