• 한국지구과학회지
• /
• 제30권2호
• /
• pp.223-233
• /
• 2009

AQUA/AMSR-E 인공위성 자료를 활용하여 3차원 최적내삽 해수면온도 합성장을 생산하였고 시간평균장과 비교하여 문제점과 한계점을 기술하였다. 3-D SST 합성장은 북태평양 중앙부에서 전체적으로 $0.05^{\circ}C$ 이하의 작은 오차를 보였으나, 위성 결측이 있는 연안에서는 $0.4^{\circ}C$ 이상의 비교적 큰 오차를 유발하였다. 강한 강수나 구름으로 인한 결측이 있는 부분에서는 $0.1-0.15^{\circ}C$에 달하는 오차를 보였다. 시간평균장과 비교한 결과, 구름 부근의 화소에서는 해수면온도를 낮게 계산하는 경향이 있었으며, 해수면온도의 공간적 구배를 감소시키는 평활화가 전체적으로 나타났다. 적도 부근 저위도에서 OI SST는 실제 해수면온도에는 없는 불연속성을 만드는 경향이 있었고, 이는 OI 과정에서 사용한 윈도우의 크기와 해양 현상의 수평 규모가 위도에 따라 변화하는데서 기인하였다. 현상의 공간 규모의 척도인 로스비 내부변형 반경은 북태평양에서 O(1) 정도로 위도에 따른 공간적 변화가 큰 것으로 나타났다. 본 연구는 SST합성장 생산과정에 위도와 해수의 수직적 밀도 구조와 밀접한 관련이 있는 해양 현상의 수평적 규모의 시공간적 변동 특성을 고려해야 함을 제시한다.

• 한국정보통신학회논문지
• /
• 제18권3호
• /
• pp.663-669
• /
• 2014

본 연구에서는 RRAM (Resistive Random Access Memory) 소자의 $HfO_2$ 열처리 온도와 두께에 따라 소자의 전기적 특성을 측정하였다. 제작한 소자는 상부전극이 Pt/Ti(150nm), 하부전극은 Pt(150nm), 산화층 $HfO_2$의 두께는 45nm와 70nm이고, 열처리를 하지 않은 소자와 $500^{\circ}C$, $850^{\circ}C$ 로 열처리를 한 3 종류이다. 온도에 따라 소자의 전기적 성능으로 셋/리셋 전압, 저항변화를 측정하였다. 온도에 따른 기본특성 분석 실험 결과 온도가 증가함에 따라 셋 전압은 감소하고 리셋 전압은 증가하여 감지 여유 폭이 감소하였다. 열처리 온도가 $850^{\circ}C$ 소자가 고온 특성이 가장 우수한 것을 보였다. $HfO_2$ 산화층의 두께 45nm 소자가 70nm 소자보다 감지 여유 폭이 크지만 결함으로 LRS(Low Resistive State)에서 저항이 큰 것으로 측정되었다. $HfO_2$ 산화층 증착 시 결함을 줄일 수 있는 공정조건을 설정하면 초박막의 RRAM 소자를 제작할 수 있을 것으로 기대된다.

• 대한원격탐사학회지
• /
• 제25권1호
• /
• pp.45-59
• /
• 2009

본 연구에서는 NOAA AVHRR 밝기온도 자료로부터 해수면 온도(SST) 산출에 황사 에어로솔은 미치는 영향을 복사전달 모델을 사용하여 분석하고, SST 복원 알고리즘을 개선하였다. 봄철의 황사에 의한 AVHRR 밝기온도 변화를 모의하기 위한 복사전달 모델의 입력 자료로서 지상 태양광 관측 자료로부터 분석한 황사 에어로솔 광학적 특성 (에어로솔 광학적 두께 및 크기분포)과 라디오 존데 연직분포 자료(기압, 기온, 및 습도)를 이용하였다. 황사 에어로솔은 적외선 복사대에서 흡수에 비해 산란이 매우 큼을 보였으며, 이러한 특징은 지표면에서 방출되는 상향복사량을 산란시켜 대기상부에서 관측되는 밝기 온도를 감소시키는 경향과 관련이 있다. 광학적 두께가 1인 황사의 경우 직하점에서 약 2 K, 위성 천정각이 $50^{\circ}$인 경우에는 약 4 K의 감쇄를 유발하였다. 황사 존재시 AVHRR 적의채널 11, $12{\mu}m$의 밝기온도 차 역시 감소하는 경향을 보이고 있지만 그 값은 미미하였다. 기존 SST 복원 알고리즘은 황사발생시 SST를 실제 값보다도 낮게 산출함을 보였으며, 이를 보정하기 위해 에어로솔 광학적 두께, $11{\mu}m$에서의 밝기온도, 그리고 위성 천정각을 추가하여 알고리즘을 개선하였다. 개선된 SST 복원 알고리즘은 황사의 두께가 1인 경우 2.7 K정도의 오차를 개선하였다.

• 인간식물환경학회지
• /
• 제23권6호
• /
• pp.655-665
• /
• 2020

Background and objective: This study was conducted to compare the cultivation environment, growth of cut flowers, and management performance of conventional farms and smart farms growing the standard cut chrysanthemum, 'Jinba'. Methods: Conventional and smart farms were selected, and facility information, cultivation environment, cut flower growth, and management performance were investigated. Results: The conventional and smart farms were located in Muan, Jeollanam-do, and conventional farming involved cultivating with soil culture in a plastic greenhouse, while the smart farm was cultivating with hydroponics in a plastic greenhouse. The conventional farm did not have sensors for environmental measurement such as light intensity and temperature and pH and EC sensors for fertigation, and all systems, including roof window, side window, thermal screen, and shading curtain, were operated manually. On the other hand, the smart farm was equipped with sensors for measuring the environment and nutrient solution, and was automatically controlled. The day and night mean temperatures, relative humidity, and solar radiation in the facilities of the conventional and the smart farm were managed similarly. But in the floral differentiation stage, the floral differentiation was delayed, as the night temperature of conventional farm was managed as low as 17.7℃ which was lower than smart farm. Accordingly, the harvest of cut flowers by the conventional farm was delayed to 35 days later than that of the smart farm. Also, soil moisture and EC of the conventional farm were unnecessarily kept higher than those of the smart farm in the early growth stage, and then were maintained relatively low during the period after floral differentiation, when a lot of water and nutrients were required. Therefore, growth of cut flower, cut flower length, number of leaves, flower diameter, and weight were poorer in the conventional farm than in the smart farm. In terms of management performance, yield and sales price were 10% and 38% higher for the smart farm than for the conventional farm, respectively. Also, the net income was 2,298 thousand won more for the smart farm than for the conventional farm. Conclusion: It was suggested that the improved growth of cut flowers and high management performance of the smart farm were due to precise environment management for growth by the automatic control and sensor.

• 한국태양에너지학회 논문집
• /
• 제27권3호
• /
• pp.169-174
• /
• 2007

Building integrated photovoltaic(BIPV) system operates as a multi-functional building construction material. They not only produce electricity, but also are building integral components such as facade, roof, window and shading device. As PV modules function like building envelope in BIPV, combined thermal and PV performance should be simultaneously evaluated. This study is to establish basic Information for designing effective BIPV by discovering relations between temperature and generation capability through experiment when the PV module is used as roof material for houses. To do so, we established 3kW full scale mock-up model with real size house and attached an PV array by cutting in half. This is to assess temperature influence depending on whether there is a ventilation on the rear side of PV module or not.

• 한국수소및신에너지학회논문집
• /
• 제28권4호
• /
• pp.384-391
• /
• 2017

Effects of operating variables on solid circulation rate were measured and discussed using two-interconnected circulating fluidized bed system at ambient temperature and pressure. OCN 706-1100 particles were used as oxygen carrier. The measured solid circulation rates increased as the lower loop seal gas flow rates and the solid height in the fuel reactor increased. Suitable operating conditions to avoid choking of the air reactor were confirmed. Continuous long-term operations of steady-state solid circulation were also demonstrated at two different conditions based on the operating window.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제4권4호
• /
• pp.201-208
• /
• 2000

The reduction of NO by hydrocarbons was investigated over Cu/Al$_2$O$_3$catalysts using a stainless steel flow reactor under highly oxidising diesel exhaust conditions(up to 15%). Three different Cu loadings(1,5 and 10wt.%) on an $Al_2$O$_3$support were prepared and characterized using spectroscopic techniques. The catalytic activity tests show that different Cu loadings as well as temperature, oxygen, and hydrocarbon concentration levels significantly influence the NO reduction. Increasing Cu loadings up to 5 and 10wt.% decreases the catalytic activities for NO reduction due to the formation of a bulk crystalline CuO phase, as observed from XRD and SEM images. In particular, the visualization of the copper dispersion on the surface using the SEM-BEI technique provides information on the extent of copper saturation, particle size, and the effects on NO reduction. However, the lower Cu loading(1 wt.%) increases the catalytic activity with a temperature window of 720-810K, thereby favoring the formation of well dispersed isolated Cu species, e.g. Cu(sup)2+ ions, which is related to selective NO reduction. The effects of other reaction parameters, such as oxygen, the hydrocarbon level and type, and byproduct emissions are further discussed.

• The Plant Pathology Journal
• /
• 제20권2호
• /
• pp.85-91
• /
• 2004

A disease causing severe leaf spots in pepper plants has been observed in northern Gyeongbuk and Gangwon provinces in Korea since 1994. The current study diagnosed the disease as gray leaf spot caused by Stemphylium solani Weber and S. lycopersici (Enjoji) Yamamoto, both of which are pathogenic in pepper and tomato plants. Although the disease has been found in almost all areas where peppers are grown, it is more severe in mountain terrains where the nights are cool. Both species of pathogenic fungi were found to sporu-late profusely on V-8 juice agar in plastic or Pyrex glass Petri dishes, although not in domestically-produced glass Petri dishes, when cultured at $20^{\circ}C$ under irradi-ation from a daylight fluorescent lamp with a 12-hour light and dark alternation. The domestically-produced glass Petri dishes, which are made of window glass, were found to block near ultraviolet wavelengths, around and below 300 nm, which explained why the fungi did not sporulate. However, sporulation decreased at above $25^{\circ}C$ and most isolates failed to sporulate above $27^{\circ}C$. The worst level of disease was obtained when the inoculated plants were incubated with a $15^{\circ}C$ night and $20^{\circ}C$ day temperature regime relative to 4 night/day temperature combinations (15/20, 20/25, 25/30, and 30/35$^{\circ}C$).

• 한국세라믹학회지
• /
• 제52권3호
• /
• pp.209-214
• /
• 2015

Silicon nitride films were deposited at $100^{\circ}C$ by using the catalytic chemical vapor deposition technique. The source gas mixing ratio, $R_N=[NH_3]/[SiH_4]$, was varied from 10 to 30, and the hydrogen dilution ratio, $R_H=[H_2]/[SiH_4]$, was varied from 20 to 100. The breakdown field strength reached a maximum value at $R_N=20$ and $R_H=20$, whereas the resistivity decreased in the same sample. The relative permittivity had a positive correlation with the breakdown field strength. The capacitance-voltage threshold curve showed an asymmetric hysteresis loop, which became more squared as $R_H$ increased. The width of the hysteresis window showed a negative correlation with the slope of the transition region, implying that the combined effect of $R_N$ and $R_H$ overides the interface defects while creating charge storage sites in the bulk region.

• 한국추진공학회지
• /
• 제4권1호
• /
• pp.1-12
• /
• 2000

유도탄의 성능 향상을 위해 추진기관의 경량화가 요구되고 있으며 연소관 모타 마개의 경우, Ti 합금 (Ti-6Al-4V)이 사용되고 있다. 제작 과정 중에 열간 형단조 공정이 이용되나 이 과정에서 Ti alloy의 좁은 성형 온도 구간 관계로 단조시 국부적 소성 변형 집중에 의한 결함이 단조품의 다수 생성되며, 심한 경우 전단 파단까지 이르고 있다. 성형 과정에서 금형과의 접촉에 의한 Ti 합금 온도 하강이 전단 파단 발생과 밀접한 관계를 갖고 있으며 따라서 각 단조 조건에 따른 Ti 합금의 내부 및 표면에 대한 변형 및 온도의 분포가 관찰되었다. 아울러 전단 밴드 형성에 대한 별도의 분석도 포함되었다.