• 농업생명과학연구
• /
• 제44권6호
• /
• pp.147-157
• /
• 2010

현재 저온유통만 허가되어 있으며 저장유통기간이 짧은 게맛어묵에 레토르트 살균기술과 반응표면분석법을 도입하여 기존의 풍미나 품질에 손상됨 없이 상온유통과 장기저장이 가능한 게맛어묵을 제조하기 위하여 가열살균기술의 최적화 조건을 구명하였고, 본 레토르트 살균처리가 게맛어묵의 품질특성에 미치는 영향에 대하여 검토하였다. 반응표면분석의 독립변수는 살균량 ($F_0-value$)과 가열온도로 하였으며, 이들의 영향을 받는 가열살균 후의 품질인자, 즉 종속변수는 전단력, 백색도 및 관능적 조직감으로 나타내었다. 레토르트 살균이 게맛어묵의 품질 및 전반적인 식품성분의 변화에 미치는 영향을 검토한 결과, $F_0-value$ 5분 이하의 가열살균에서는 $F_0-value$보다는 가열온도가 게맛어묵의 품질 변화에 미치는 영향이 큰 것으로 나타났으며, $F_0-value$ 2.6분 이상으로 가열살균할 경우 게맛어묵의 무균성이 확인되었다. 반응표면분석 program으로 설정한 레토르트 게맛어묵의 최적 가열살균조건은 전단력의 경우 가열온도는 $115.7^{\circ}C$, $F_0-value$ 3.3분, 백색도는 가열온도 $116.1^{\circ}C$, $F_0-value$ 3.8분, 그리고 관능적 조직감의 최대화 조건은 가열온도 $115.8^{\circ}C$, $F_0-value$ 3.3분이었고, 이 3가지 품질요소를 모두 고려한 multiple response optimization 반응조건은 가열온도 $117.5^{\circ}C$, $F_0-value$는 3.3분이었다.

• 설비공학논문집
• /
• 제7권2호
• /
• pp.184-195
• /
• 1995

A theoretical one-dimensional model for the charging process in stratified thermal storage tanks is established presuming that the fluid ensuing from the tank inlet creates a perfectly mixed, layer above the thermocline. Both the generic and asymptotic closed-form solutions are obtained via the Laplace transformation. The asymptotic solution describes the nature of the charging pertaining to the case of no thermal diffusion, whereas the generic solution is of practical importance to understand the role of operating parameters on the stratification. The present model is validated through comparison with available experimental data, where they agree well with each other within a reasonable limit. An interpretation of the exact solution entails two important features associated with the charging process. The first is that an in-crease in the mixing depth $h_m$ causes a relatively slow temperature rise in the perfectly mixed region, but on the other hand it results in a faster decay of the overall temperature gradient across the thermocline. Next is the predominance of the mixing depth in the presence of the prefectly mixed region. In such a case the effect of the Peclet number is marginal and there-fore the thermal characteristics are solely dependent on the mixing depth paticularly for large $h_m$. The Peclet number affects significantly only for the case without mixing. Variation of the storage efficiency in response to the change in the mass flow rate agrees favorably with the published experimental results, which confirms the utility of the present study.

• Applied Biological Chemistry
• /
• 제33권4호
• /
• pp.301-306
• /
• 1990

탄닌함량이 도토리전분의 물리화학적 성질에 미치는 영향을 탄닌함량을 달리한 도토리전분에서 비교 검토하였다. 탈탄닌 처리에 따른 전분 표면의 손상은 관찰되지 않았으며 탄닌함량은 도토리전분의 호화개시온도에는 영향을 미치지 않았으나 최고점도값에는 영향을 미치는 것으로 관찰되었다. 모든 시료전분의 유동거동지수값은 1보다 작았고(0$2.19{\sim}2.69Kcal/g\;{\cdot}\;mol$, 탈탄닌전분이 $2.31{\sim}3.33Kcal/g\;{\cdot}\;mol$, 탈지 및 탈탄닌전분이 $2.09{\sim}3.58Kcal/g\;{\cdot}\;mol$이었다. 전분호화액의 시간 의존성에서는 전분시료 모두 전단속도의 연속적인 증가와 감소에 따라 전단응력이 변화하는 thixotropic 거동을 보여주었으며 두개의 유동곡선은 서로 일치하고 않고 hysteresis loop을 형성하였다.

• 대한기계학회논문집B
• /
• 제29권9호
• /
• pp.997-1005
• /
• 2005

The extinction characteristics of low strain rate normal gravity (1-g) nonpremixed methane-air flames were studied numerically and experimentally. A time-dependent axisymmetric two-dimensional (2D) model considering buoyancy effects and radiative heat transfer was developed to capture the structure and extinction limits of 1-g flames. One-dimensional (1D) computations were also conducted to provide information on 0-g flames. A 3-step global reaction mechanism was used in both the 1D and 2D computations to predict the measured extinction limit and flame temperature. A specific maximum heat release rate was introduced to quantify the local flame strength and to elucidate the extinction mechanism. Overall fractional contribution by each term in the energy equation to the heat release was evaluated to investigate the multi-dimensional structure and radiative extinction of 1-g flames. Images of flames were taken for comparison with the model calculation undergoing extinction. The two-dimensional numerical model was validated by comparing flame temperature profiles and extinction limits with experiments and ID computation results. The 2D computations yielded insight into the extinction mode and flame structure of 1-g flames. Two combustion regimes depending on the extinction mode were identified. Lateral heat loss effects and multi-dimensional flame structure were also found. At low strain rates of 1-g flame ('Regime A'), the flame is extinguished from the weak outer flame edge, which is attributed to multi-dimensional flame structure and flow field. At high strain rates, ('Regime B'), the flame extinction initiates near the flame centerline due to an increased diluent concentration in reaction zone, which is the same as the extinction mode of 1D flame. These two extinction modes could be clearly explained with the specific maximum heat release rate.

• Nuclear Engineering and Technology
• /
• 제24권1호
• /
• pp.40-51
• /
• 1992

연구용 원자로의 분산형 핵연료에 대한 노내 조사 거동의 주요 특성중의 하나는 핵연료심 팽윤에 기인된 핵연료봉 직경 증가이다. 본 논문에서는 분산형 우라늄실리사이드 핵연료에 대한 노내 조사거 동과 실험 증거들을 분석함으로써 그 핵연료의 팽윤에 대한 물리적 해석 모형인, DFSWELL 전산 모형을 개발하였다. 문헌에 보고된 실험 증거들로부터 노내에서 U$_3$Si-Al 핵연료심의 부피변화는 온도와 핵분열율에 따라 크게 영향을 받는 것으로 나타났다. 분산형 우라늄 실리사이드 핵연료에 대한 정량적 팽윤량은 주어진 온도, 핵분열율, 핵분열고체생성물 측적 및 핵분열기체 기포거동을 고려함으로써 평가될 수 있다. 연구로의 분산형 우라늄실리사이드 핵연료의 팽윤 현상은 다음과 같은 세 가지 현상으로 귀결된다. i ) 핵분열기체생성물 기포 생성/축적에 치한 부피변화 ii ) 고체 핵분열생성물의 축적 및 상 변화에 의한 부피변화 iii ) 핵연료 입자와 기지 사이의 공유층에 대한 부피변화 상기 세 가지의 물리 적 현상을 고려하는 본 DFSWELL 전산 모형의 출력이력 조건에 따른 절대 예측치들은 실행 결과와 비교할 때 분산형 우라윰실리 사이드 핵연료의 조사추 팽윤 실측치와 잘 일치한다.

• 멤브레인
• /
• 제18권1호
• /
• pp.1-6
• /
• 2008

아크릴 폐수를 응집-여과-중화의 전처리 공정에 적용하여 막오염 인자를 최소화 한 후 UF/RO 공정에 적용하였다. 막의 형태 및 종류에 따라 한외여과 및 역삼투 모듈을 조합을 이루어 전처리 수를 온도 및 압력변화에 따라 적용하여 분리 특성을 고찰하였다. 투과 플럭스는 모듈 set 1의 UF모듈보다 모듈 set 4의 UF모듈의 투과량이 약 $2{\sim}3$배 더 많이 배출됨을 확인하였다. 최종적인 투과량은 관형모듈과 조합을 이룬 모듈 set 2와 모듈 set 3이 좋은 결과를 나타내었다. 모든 UF 모듈에서 TDS, T-N 및 COD의 제거 효율은 온도 및 압력변화에 영향을 받지 않고 제거 효율 또한 낮음을 알 수 있었다. RO모듈에서 TDS, T-N 및 COD가 우수한 제거 효율을 보였다. 아크릴 폐수의 최종적인 수질결과는 공장폐수의 배출 허용기준을 만족하였고, 막모듈 조합은 폐수의 재활용 가능성을 확인할 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.159-159
• /
• 2011

Among the semiconductor ternary compounds in the I-III-$VI_2$ series, $CulnS_2$ ($CulnSe_2$) are one of the promising materials for photovoltaic applications because of the suitability of their electrical and optical properties. The $CuInS_2$ thin film is one of I-III-$VI_2$ type semiconductors, which crystallizes in the chalcopyrite structure. Its direct band gap of 1.5 eV, high absorption coefficient and environmental viewpoint that $CuInS_2$ does not contain any toxic constituents make it suitable for terrestrial photovoltaic applications. A variety of techniques have been applied to deposit $CuInS_2$ thin films, such as single/double source evaporation, coevaporation, rf sputtering, chemical vapor deposition and chemical spray pyrolysis. This is the first report that $CuInS_2$ thin films have been prepared by Aerosol Jet Deposition (AJD) technique which is a novel and attractive method because thin films with high deposition rate can be grown at very low cost. In this study, $CuInS_2$ thin films have been prepared by Aerosol Jet Deposition (AJD) method which employs a nozzle expansion. The mixed fluid is expanded through the nozzle into the chamber evacuated in a lower pressure to deposit $CuInS_2$ films on Mo coated glass substrate. In this AJD system, the characteristics of $CuInS_2$ films are dependent on various deposition parameters, such as compositional ratio of precursor solution, flow rate of carrier gas, stagnation pressure, substrate temperature, nozzle shape, nozzle size and chamber pressure, etc. In this report, $CuInS_2$ thin films are deposited using the deposition parameters such as the compositional ratio of the precursor solution and the substrate temperature. The deposited $CuInS_2$ thin films will be analyzed in terms of deposition rate, crystal structure, and optical properties.

• 약학회지
• /
• 제39권1호
• /
• pp.68-77
• /
• 1995

Aluminum magnesium silicate was synthesized by reacting the mixed solutions of sodium aluminate and magnesium chloride with sodium silicate solution in this study. The optimal synthesis conditions based on the yield of the product has been attained according to Box-Wilson experimental design. It was found that the optimal synthetic conditions of aluminum magnesium silicate were as follows: Reaction temperature=$69~81^{\circ}C$; concentration of two reactants, sodium aluminate and magnesium chloride= 13.95~14.44 w/w%; molar concentration ratio of the two reactants, [NaAlO$_{2}$]/MgCl$_{2}$]=3.63~4.00; reaction time= 12~15 min; drying temp. of the product=$70~76^{\circ}C$. Aluminum magnesium silicate synthesized under the optimal synthesis condition was dispersed in 0.75, 1.0 and 1.5w/w% aqueous solution or suspension of six dispersing agents, and the Theological properties of the dispersed systems prepared have been investigated at $15^{\circ}C$ and $25^{\circ}C$ using Brookfield LVT Type Viscometer. The acid-consuming capacity of the most excellent product was 272~278 ml of 0.1N-HCl per gram of the antacid. The flow types of 5.0 w/w% aluminum magnesium silicate suspension were dependent upon the kind and concentration of dispersing agents added. The apparent viscosity of the suspension was generally increased with concentration of dispersing agents and was not significantly changed or decreased as the temperature was raised. A dispersing agent, hydroxypropyl cellulose suspension, exhibited an unique flow behavior of antithixotropy. The flow behavior of the suspension dispersed in a given dispersing agent not always coincided with that of the dispersing agent solution or suspension itself.

• 한국세라믹학회지
• /
• 제52권5호
• /
• pp.299-303
• /
• 2015

The electrolyte is an important component in determining the performance of Fuel Cells. Especially, investigation of the conduction properties of electrolytes plays a key role in determining the performance of the electrolyte. The electrochemical properties of Yttrium stabilized zirconia (YSZ) were measured to allow the use of this material as an electrolyte for solid oxide fuel cells (SOFC) in the temperature range of $700-1000^{\circ}C$ and in $0.21{\leq}pO_2/atm{\leq}10^{-23}$. A Hebb-Wagner polarization experimental cell was optimally manufactured; here we discuss typical problems associated with making cells. The partial conductivities due to electrons and holes for 8YSZ, which is known as a superior oxygen conductor, were obtained using I-V characteristics based on the Hebb-Wagner polarization method. Activation energies for holes and electrons are $3.99{\pm}0.17eV$ and $1.70{\pm}0.06eV$ respectively. Further, we calculated the oxygen ion conductivity with electron, hole, and total conductivity, which was obtained by DC four probe conductivity measurements. The oxygen ion conductivity was dependent on the temperature; the activation energy was $0.80{\pm}0.10eV$. The electrolyte domain was determined from the top limit, bottom limit, and boundary (p=n) of the oxygen partial pressure. As a result, the electrolyte domain was widely presented in an extensive range of oxygen partial pressures and temperatures.

• 한국재료학회지
• /
• 제18권1호
• /
• pp.32-37
• /
• 2008

The electrical, optical, structural and surface properties of an indium tin oxide (ITO) film grown on a flexible PET substrate using a specially designed roll-to-roll (R2R) sputtering system as a function of the DC power, $Ar/O_2$ flow ratio, and rolling speed is reported. It was observed that both the electrical and optical properties of the ITO film on the PET substrate were critically dependent on the $Ar/O_2$ flow ratio. In addition, x-ray diffraction examination results showed that the structure of the ITO film on the PET substrate was an amorphous structure regardless of the DC power and the $Ar/O_2$ flow ratio due to a low substrate temperature, which was maintained constant by a main cooling drum. Under optimized conditions, ITO film with resistivity of $6.44{\times}10^{-4}{\Omega}-cm$ and transparency of 86% were obtained, even when prepared at room temperature. Furthermore, bending test results exhibited that R2R-grown ITO film had good flexibility which would be applicable to flexible displays and solar cells.