• 한국환경복원기술학회지
• /
• 제25권1호
• /
• pp.1-10
• /
• 2022

This study was conducted to investigate the germination characteristics through the temperature change treatment compared to the general room temperature immersion treatment of the native species, the Larix kaempferi, and the Berula platyphyllavar. japonica seeds, and to obtain basic data for the production of healthy seedlings with high productivity and efficiency. As a result, the germination rate of the larch seeds showed a significant difference according to room temperature and temperature immersion treatment, and the average germination days of the birch seeds showed a significant difference according to room temperature immersion and temperature immersion treatment. On the other hand, there was no significant difference in germinal uniformity. The results of the study are as follows. First, the results of the analysis of the fallen leaves were the highest germination rate in the treatment of 1.5 days of hot water and 1.5 days of cold water, the fastest germination rate, the lowest average germination day, and the highest germination uniformity. This is the best result in most items, and the change temperature immersion treatment of hot and cold baths was superior to the conventional room temperature immersion treatment. Second, the results of birch tree showed that the germination rate was the highest in 1.5 days of hot water and 1.5 days of cold water. The average germination day is 1.5 days of cold water 1.5 days of hot water 1.5 days, but the difference between 1.5 days of hot water and 1.5 days of cold water is 0.01 days. The highest germinated uniformity was found in 1.5 days of cold water and 1.5 days of hot water. As a result, in the case of larch and birch, the seed temperature immersion (1.5 days of hot water, 1.5 days of cold water) treatment is superior to the existing three-day immersion treatment in various analysis methods, and it is expected that productivity and efficiency can be improved at a low cost in a short period of time at the seedling production site through seeds.

• 한국전산유체공학회지
• /
• 제21권2호
• /
• pp.90-98
• /
• 2016

A numerical study is conducted on thermal performance of a large-area hot plate specially designed as a heating and cooling tool for thermal nanoimprint lithography process. The hot plate has a dimension of $240mm{\times}240mm{\times}20mm$, in which a series of cartridge heaters and cooling holes are installed. The material is stainless steel selected for enduring the high molding pressure. A numerical model based on the ANSYS Fluent is employed to predict the thermal behavior of the hot plate both in heating and cooling phases. The PID thermal control of the device is modeled by adding user defined functions. The results of numerical computation demonstrate that the use of cartridge heaters provides sufficient heat-up performance and the active liquid cooling in the cooling holes provides the required cool-down performance. However, a crucial technical issue is raised that the proposed design poses a large temperature non-uniformity in the steady heating phase and in the transient cooling phase. As a remedy, a new hot plate in which heat pipes are installed in the cooling holes is considered. The numerical results show that the installation of heat pipes could enhance the temperature uniformity both in the heating and cooling phases.

• 한국정밀공학회지
• /
• 제19권8호
• /
• pp.92-99
• /
• 2002

This work investigated the optimal condition for an uniform deposition growth rate in the vertical cylindric CVD chamber. Heat transfer, surface chemical reaction and mass diffusion in the flow field of CVD chamber h,id been computed using Fluent v5.3 code. A SIMPLE based finite Volume Method (FVM) was adopted to solve the fully elliptic equations for momentum, temperature and concentration of a chemical species. The numerical analysis results show good agreements with the measurements obtained by N. Yoshikawa. The results obtained by the numerical analysis showed that the film growth rate in the center of a susceptor is increasing, as the inner flow approaches to the forced convection. To the contrast, as it approaches to the natural convection, that in the outside of a susceptor is increasing. As the Reynolds number increases, the uniformity may not hold due to the larger temperature gradient at a susceptor surface. Therefore, when the temperature gradient on the surface of a susceptor is zero, the film growth rate becomes uniform on most surface.

• Current Photovoltaic Research
• /
• 제2권4호
• /
• pp.147-151
• /
• 2014

A boron doping process using a boron tri-bromide ($BBr_3$) as a boron source was applied to form a $p^+$ emitter layer on an n-type mono-crystalline CZ substrate. Nitrogen ($N_2$) gas as an additive of the diffusion process was varied in order to study the variations in sheet resistance and the uniformity of doped layer. The flow rate of $N_2$ gas flow was changed in the range 3 slm~10 slm. The sheet resistance uniformity however was found to be variable with the variation of the $N_2$ flow rate. The optimal flow rate for $N_2$ gas was found to be 4 slm, resulting in a sheet resistance value of $50{\Omega}/sq$ and having a uniformity of less than 10%. The process temperature was also varied in order to study its influence on the sheet resistance and minority carrier lifetimes. A higher lifetime value of $1727.72{\mu}s$ was achieved for the emitter having $51.74{\Omega}/sq$ sheet resistances. The thickness of the boron rich layer (BRL) was found to increase with the increase in the process temperature and a decrease in the sheet resistance was observed with the increase in the process temperature. Furthermore, a passivated emitter solar cell (PESC) type solar cell structure comprised of a boron doped emitter and phosphorus doped back surface field (BSF) having Ni/Cu contacts yielding 15.32% efficiency is fabricated.

• 항공우주시스템공학회지
• /
• 제14권3호
• /
• pp.42-50
• /
• 2020

우주용 적외선 센서의 탑재 교정용 흑체 시스템은 궤도상에서 센서 출력특성 교정을 위해 다양한 기준온도에서 한정된 개수의 온도센서로부터 고정밀의 대표표면온도 추정이 가능해야 한다. 본 논문에서 제안된 흑체 시스템은 흑체 가열 후 잔열 수송을 위한 히트파이프를 흑체 후면 중앙의 일체형 플랜지에 결합하는 방식을 적용하였다. 따라서 흑체 표면온도구배 최소화와 함께 원형 대칭 형태의 온도구배를 얻을 수 있어 표면온도 추정이 용이하면서도 발사 및 궤도환경에서 하중이 가해지더라도 안정적인 히트파이프 접속부를 갖도록 하며, 복수의 히트파이프 적용에 따른 Fail Safe 설계가 가능하도록 한다. 또한 온도센서 부착작업이 용이하도록 센서를 흑체 외부 표면에 적용하더라도 높은 정확도로 표면온도 추정이 가능하다. 본 논문에서 제안된 흑체 시스템의 설계 유효성 입증을 위해 궤도 열해석을 수행하였으며, 해석결과를 기반으로 온도센서 개수 및 위치에 따른 대표표면온도 추정을 실시하였다.

• 한국항공우주학회지
• /
• 제38권10호
• /
• pp.1020-1025
• /
• 2010

탑재 교정용 흑체는 우주용 영상센서의 시간경과 및 재 구동에 따른 센서의 특성변화 교정을 통한 영상품질향상을 위해 적용된다. 본 논문에서 제안한 영상센서의 비균일 특성 교정을 위한 흑체 열설계는 저온에서 고온에 이르는 흑체의 온도정보 제공을 위한 흑체 가열용 히터, 흑체 가열 후 잔열 수송 및 심해우주로의 열 방출을 위한 히트파이프와 방열판 그리고 비교정임무 수행동안 흑체가 특정온도를 유지하며 원하는 시점에서 언제든지 교정임무 수행이 가능하도록 하는 방열판용 히터로 구성된다. 흑체 열설계에 대한 타당성을 궤도 열해석을 통해 입증하였다.

• Transactions on Control, Automation and Systems Engineering
• /
• 제2권4호
• /
• pp.268-273
• /
• 2000

Plasma models are crucial to equipment design and process optimization. A radial basis function network(RBFN) in con-junction with statistical experimental design has been used to model a process plasma. A 2$^4$ full factorial experiment was employed to characterized a hemispherical inductively coupled plasma(HICP) in characterizing HICP, the factors that were varied in the design include source power, pressure, position of shuck holder, and Cl$_2$ flow rate. Using a Langmuir probe, plasma attributes were collected, which include typical electron density, electron temperature. and plasma potential as well as their spatial uniformity. Root mean-squared prediction errors of RBEN are 0.409(10(sup)12/㎤), 0.277(eV), and 0.699(V), for electron density, electron temperature, and Plasma potential, respectively. For spatial uniformity data, they are 2.623(10(sup)12/㎤), 5.704(eV) and 3.481(V), for electron density, electron temperature, and plasma potential, respectively. Comparisons with generalized regression neural network(GRNN) revealed an improved prediction accuracy of RBFN as well as a comparable performance between GRNN and statistical response surface model. Both RBEN and GRNN, however, experienced difficulties in generalizing training data with smaller standard deviation.

• 대한조선학회논문집
• /
• 제50권3호
• /
• pp.167-174
• /
• 2013

Model ice forming process in ice tank needs several steps of seeding, freezing, tempering. In those process, one of the most important factors to affect the accuracy of experiment is the homogeneity of the ice thickness and the temperature. This paper investigated a computational and statistical method to assess the uniformity of the model ice. In addition, the different configurations of freezing systems were considered to improve the uniformity. Qualitative assessment using streamlines from the cooling units was carried out by computational fluid dynamics (CFD) and the quantitative evaluations of the homogeneity were compared using the temperature distribution on the ice surface. In addition, multi species transport analysis is introduced to understand the circulation efficiency of cold air from the cooling units. As the results, optimized configurations were determined by adjusting the angles of vane in the cooling units.

• 한국염색가공학회지
• /
• 제35권3호
• /
• pp.137-150
• /
• 2023

This paper investigated the applicability of polyester yarn coating using ther- moplastic polyester elastomer (TPEE) to replace polyvinyl chloride (PVC) coated yarn for blinds fabric. For this purpose, suitable TPEE for yarn coating was selected by measuring thermal and rheological properties and the yarn coating process conditions were investigated by changing variables such as extrusion temperature, die and nipple dimensions, take-up speed, and core yarn denier. TPEE coated yarns with a diameter of 0.3 and 0.4 mm were prepared, respectively. Tensile properties and cross-section uniformity revealed by a scanning electron microscopy (SEM) of the TPEE coated yarn were analyzed. Among several candidates, TPEE having a melt index of 35 and melting temperature of 153℃ was the most suitable for replacing PVC, and the opti- mum coating conditions for the TPEE coating yarn were a head temperature of 170℃ and core yarn denier of 420 denier. The selected TPEE coated yarns have enough ten- sile strength and uniformity to replace present PVC coated yarns, certified by SEM photograph.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.499-502
• /
• 2004

The temperature distribution of a glass plate heated in the infrared heating chamber has been investigated. Temperature of the glass panel is measured using a set of thermocouples and the optical pyrometer. Temperatures measured by thermocouples have good agreement with those by the pyrometer. The temperature uniformity of the panel is improved with wall reflectivity, which is one of the important factors to uniformly heat the panel