• Corrosion Science and Technology
• /
• v.9 no.5
• /
• pp.201-208
• /
• 2010

Epoxy coatings cured by different amine based curing agents have been prepared. Atomic force microscopy (AFM) has been used to monitor the surface topology changes of epoxy coatings before and after hygrothermal cyclic test. The glass transition temperature ($T_g$) and coefficient of thermal expansion (CTE) of the epoxy coating were measured by Thermo-mechanical Analysis (TMA). The Electrochemical impedance spectroscopy (EIS) with hygrothermal cyclic test has been introduced to evaluate the corrosion protection of the epoxy coatings. In conclusion, thermal properties of epoxy coatings were in good agreement with the results of corrosion protection of epoxy coated carbon steel obtained result by EIS with hygrothermal cyclic test. The relationship between thermal properties, surface roughness changes and corrosion protection of epoxy coatings are discussed in this study.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.9
• /
• pp.2154-2164
• /
• 1995

In this study, a dielectric cure monitoring system which consists of an electric circuit, a sensor and a personal computer was developed to on-line monitor the dielectric properties of carbon fiber epoxy composite materials. Also, the kinetic model of carbon fiber epoxy composite materials was developed by curve fitting of differential scanning calorimetry data. The start and end points of cure and the relationship between the dissipation factor and the degree of cure were obtained by comparing the dissipation factor from the dielectric properties with the degree of cure from the DSC data. The relationship between the dissipation factor and the degree of cure was tested under various temperature profiles.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.3
• /
• pp.215-221
• /
• 2010

This paper introduces development of location estimation and navigation system of mobile robots using USN and LEGO Mindstorms NXT. Developed system includes location estimation, location and navigation information display and navigation control parts. It used ZigBee based USN which was built with CC2431 chip to locate blind node and implemented fuzzy model to improve ability of calculation of distances from reference nodes and location of mobile robots. This paper proposed combination method of location estimation using USN and encoder which is built in motors of mobile robots. Experimental results showed proposed method is superior to the method which used USN only in location estimation and navigating robots. Developed system can locate current position of mobile robots and monitor information from sensor nodes like temperature, humidity and send control signal to mobile robot to move.

• Proceedings of the IEEK Conference
• /
• 2002.06d
• /
• pp.307-310
• /
• 2002

Color reproductions in most ink jet printer are quite different from that of standard CRT (cathode ray tube) monitor display because of the nonlinear characteristic in subtractive color reproduction. Gray scale CCT(correlated color temperature) reproductions in a typical printer are vary with the input RGB level. A simple method for making constant gray scale CCT and gamma value in photo paper is proposed in this paper. The compensation of the CCT with white point of the photo paper under the CIE standard illuminant D65 and color correction has been confirmed using the LUT(look-up table) to compensate the CCT and gamma curve characteristic.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.701-702
• /
• 2006

In this paper, we embodied the environment monitoring system that can acquire correct data in real-time. And we used module that is 2.4GHz IEEE 802.15.4 / Zigbee network for radio communication between nodes. The nodes sense the data of temperature, humidity, illumination periodically. The nodes store the data in their buffer and transmit. We confirmed that the system is in real-time as it is changed instantly due to the varying environment by the simulation Therefore, we can construct the efficient and correct system as applied this system to monitor the environment.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.821-822
• /
• 2006

Ubiquitous healthcare monitoring and measuring system based on wireless sensor network was implemented and tested. The system can measure the ECG and body temperature of patients or elderly persons and transfer the data wirelessly in ad-hoc network to remote base-station connected to doctor's PDA/PC or hospital server, using wireless sensor motes. The data obtained can be analyzed by doctors and care providers to monitor a health status of patient in real time environment. To prove the capabilities of the wireless sensor network platform for ubiquitous healthcare applications, the performance of our monitoring and measuring system was tested with positive results.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.649-651
• /
• 2016

Wireless Sensor Network(WSN) consists of spatially distributed sensors to monitor physical conditions, such as temperature, light and motion, and to pass their data through the network to a base station. Each battery equipped node is consumed to pass their data to their neighbors. We are gathering the amount of energy that was consumed to gather data and to pass it This paper describes processes of energy consumption of WSN in Matlab.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1255-1260
• /
• 2004

Decomposition of ozone at room temperature was investigated comparatively with commercial monolithic ozone decomposition catalyst (ODC, $MnO_2$) and monolithic photo catalyst ($TiO_2$). The effects of residence time, UV (ultraviolet) light dependence and ozone concentration on the conversion was presented. UV ray was irradiated using BLB (black light blue) lamp ($315{\sim}400$ nm), supplied with a constant intensity in the reactor. The concentration of ozone in the square-shape reactor can be controlled by combining the DBD (dielectric barrier discharge) reactor with an AC high voltage supply system. The catalytic performance, in presence of UV irradiation did not show significant changes for $MnO_2$ catalyst. $TiO_2$ catalyst was the different case, which showed higher decomposition activity in presence of UV irradiation. Deactivation of catalyst detected by real-time ozone monitor for 120 hours with a constant inlet ozone concentration.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.1
• /
• pp.60-65
• /
• 2006

Recently, various ubiquitous networking services are developed and implemented for easy living. In general, new ubiquitous networking services require the new infrastructure including equipments and devices. However, it is difficult to replace existing infrastructure and devices with new ones in the home or office because of cost and maintenance problems. In this paper, we developed small-size web based RF wireless communication systems for sensor network applications. The designed RF systems are implemented using commercial system on a chip (SoC) on existing infrastructure and devices. The developed systems are tested for light control and temperature sensing and they are applied to sensor network training courses for students and engineer as well as various practical applications.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.54 no.4
• /
• pp.188-194
• /
• 2005

There are many factors that affect on the system output of Photovoltaic(PV) power generation; the variation of solar radiation, temperature, energy conversion efficiency of solar cell etc. This paper suggests a methodology for calculation of PV generation output using the probability distribution function of irradiance, PV array efficiency and revision factors of solar cell conversion efficiency. Long-term irradiance data recorded every hour of the day for 11 years were used. For goodness-fit test, several distribution (unctions are tested by Kolmogorov-Smirnov(K-S) method. The calculated generation output with or without revision factors of conversion efficiency is compared with that of CMS (Centered Monitoring System), which can monitor PV generation output of each PV generation site.