• 조명전기설비학회논문지
• /
• 제29권8호
• /
• pp.76-82
• /
• 2015

A hybrid fiber-optic sensor system which combines fiber Bragg grating sensors and a Michelson interferometer has been constructed and evaluated for condition monitoring of large scale wind turbines. In order to measure multiple stresses applied to wind turbines such as strain, temperature and vibration, the system uses single broadband light source. It addresses both types of sensors, which simplifies the optical setup and enhances the cost-effectiveness of condition monitoring system. An athermal-packaged FBG is used to supply quasi-coherent light, of which coherence length is about 3.28mm, for the Michelson interferometer demodulation. Experimental results demonstrated that the proposed fiber-optic sensor system was capable of measuring strain and temperature with measurement accuracy of 1pm. Also 500~2000Hz vibration signals were successfully analyzed by applying FFT signal processing to interference signals.

• 센서학회지
• /
• 제23권3호
• /
• pp.170-172
• /
• 2014

$CO_2$ sensor was used only one solid electrolyte in many cases. To improve the sensing characteristics of $CO_2$ sensors, solid electrolyte $CO_2$ sensor has been developed by bi-electrolyte type sensor using Na-Beta-alumina and YSZ. However, in many further studies, bi-electrolyte type sensor was made by pellet pressed by press machine and additional treatment for formation of interface. In the aspect of mass production, using thick film and additional treatment is not suitable. In this study, $CO_2$ sensor was fabricated by bi-electrolyte structure which was made by an NBA paste layer deposited on YSZ pellet and fired at $1650^{\circ}C$ for 2 hour. The formation of stable interface between YSZ and NBA were confirmed by SEM image. When the type IV electrochemical cell arrangement represented by $CO_2,O_2,Pt{\mid}Li_2CO_3-CaCO_3{\parallel}NBA{\parallel}YSZ{\mid}O_2,Pt$ is used to measure the $CO_2$ concentration in air. This sensor EMF should depend only on the concentration of $CO_2$ by logarithmic. Also, sensor shows $P_{CO_2}$ and EMF relationship like nerstian reaction at a temperature of $450^{\circ}C$.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.821-822
• /
• 2006

Ubiquitous healthcare monitoring and measuring system based on wireless sensor network was implemented and tested. The system can measure the ECG and body temperature of patients or elderly persons and transfer the data wirelessly in ad-hoc network to remote base-station connected to doctor's PDA/PC or hospital server, using wireless sensor motes. The data obtained can be analyzed by doctors and care providers to monitor a health status of patient in real time environment. To prove the capabilities of the wireless sensor network platform for ubiquitous healthcare applications, the performance of our monitoring and measuring system was tested with positive results.

• 대한기계학회논문집B
• /
• 제20권10호
• /
• pp.3334-3343
• /
• 1996

A quantitative flow visualization technique was developed to measure velocity and temperature fields simultaneously in a two-dimensional cross section of thermo-fluid flows. Thermochromic liquid crystal(TLC) particles are used as temperature sensor and velocity tracers. Illuminating a thermo-fluid flow with a thin sheet of white light, the reflected colors from the TLC particles in the flow were captured simultaneously by two CCD cameras; a 3-chip CCD color camera for temperature field measurement and a black and white CCD camera for velocity field measurement. Variations of temperature field were measured by using a HSI true color image processing system and TLC solution. The relationship between the hue values of TLC color image and real temperature was obtained and this calibration curve was used to measure the true temperature under the same camera and illumination condition. The velocity field was obtained by using a 2-frame PTV technique using the concept of match-probability to track true velocity vectors from two consecutive image frames. These two techniques were applied at the same time to the unsteady thermal-fluid flow in a Hele-Shaw cell to measure the temperature and velocity field simultaneously and some results are discussed.

• 전기학회논문지
• /
• 제56권11호
• /
• pp.1921-1924
• /
• 2007

In order to measure the superconducting transition temperature, the critical current and the alternating current(AC) loss on short samples of high temperature superconductor, a cryocooler cooled cryostat has been designed and built. Two closed-cycle coolers provide cooling with an ultimate sample temperature below 16K. Temperature regulation is provided by 50W of electrical heater that opposes the cooling power from the cold heads. Temperature control feedback is by means of a cernox temperature sensor co-located with the heaters on the second stage of the cold head. Additional temperature sensors are located on the sample mount(B1), on the CVI cold head(B2) and on the Dakin cold head(B3). AC losses on the sample high temperature superconductor were measured at 30K so that the developed device performance was evaluated. In this paper, the design, fabrication and test results on the cryocooler cooled cryostat are presented.

• 한국전자통신학회논문지
• /
• 제16권2호
• /
• pp.347-354
• /
• 2021

화학공장과 같은 장치산업은 고온·고압·유독성 유체가 배관을 통하여 각종 설비들 사이를 이동한다. 온도변화, 진동, 지진, 지반침하와 같은 주변환경의 변화에 의한 배관의 위치 이동과 파손은 인명피해를 수반하는 큰 사고로 연결되는 경우가 많다. 이러한 사고를 방지하기 위하여 배관에 가해지는 각종 충격을 흡수하고, 보완하여 사고를 미연에 방지하기 위한 여러 가지 종류의 익스펜션 조인트(Expansion Joint)를 사용한다. 따라서 사용된 익스펜션 조인트의 변형을 측정하고, 수명을 예측하는 것은 대형사고를 방지하기 위하여 매우 중요하다. 본 논문에서는 익스펜션 조인트의 변형을 일종의 모션으로 이해하고, Hall Effect Sensor와 9-Axis Sensor를 사용하여 변화를 측정하였다. 그리고 범용의 마이컴보드 아두이노와 C언어를 사용하여 측정된 데이터를 모으고, 분석하여 익스펜션 조인트의 변형을 예측할 수 있는 시스템에 대하여 연구하였다.

• Journal of the Optical Society of Korea
• /
• 제14권3호
• /
• pp.235-239
• /
• 2010

In this study, we have fabricated two types of non-invasive fiber-optic respiration sensors that can measure respiratory signals during magnetic resonance (MR) image acquisition. One is a nasal-cavity attached sensor that can measure the temperature variation of air-flow using a thermochromic pigment. The other is an abdomen attached sensor that can measure the abdominal circumference change using a sensing part composed of polymethyl-methacrylate (PMMA) tubes, a mirror and a spring. We have measured modulated light guided to detectors in the MRI control room via optical fibers due to the respiratory movements of the patient in the MR room, and the respiratory signals of the fiber-optic respiration sensors are compared with those of the BIOPAC$^{(R)}$ system. We have verified that respiratory signals can be obtained without deteriorating the MR image. It is anticipated that the proposed fiber-optic respiration sensors would be highly suitable for respiratory monitoring during surgical procedures performed inside an MRI system.

• 대한전자공학회논문지SD
• /
• 제49권7호
• /
• pp.1-9
• /
• 2012

기존의 LED 패키지가 갖는 온도에 따른 광 특성 변화 문제를 해결하기 위하여 온도센서가 집적된 LED 패키지 시스템을 제안하였다. 패키지의 온도를 실시간으로 측정하기 위하여 정확도가 우수하며 온도에 따른 저항의 변화가 선형적인 특징을 갖는 온도센서(RTD 형)를 설계하였으며, 장기간의 안정성을 보장하기 위하여 안정된 박막의 증착조건을 결정하고 이를 바탕으로 $1.560{\Omega}/^{\circ}C$의 민감도를 갖는 온도센서를 패키지 내부에 제작하였다. 제작된 패키지를 이용하여 온도에 무관하게 일정한 광량을 나타내는 시스템의 구현을 위하여 변환 회로부와 제어 회로부를 제작하고 이들을 결합함으로써, 패키지의 온도 변화에 따라 PWM duty ratio의 변화를 통해 광 출력을 보상해 주는 시스템을 제안하고 제작하였다. LED의 동작온도인 $0^{\circ}C$에서 $140^{\circ}C$ 범위에서 PWM duty ratio를 관측한 결과 제안했던 일정한 광량을 위한 PWM duty ratio에 매우 근접한 출력 신호를 발생시키는 것을 확인할 수 있었다.

• 한국멀티미디어학회논문지
• /
• 제17권7호
• /
• pp.886-894
• /
• 2014

Recently, domestic animal disease caused tremendous damage to farmhouses and the damage stretched in nationwide with the spread of epidemic disease. To prevent animal diseases from happening again, the system development to easily measure the temperature of sick animals and identify of them is needed, thereby quickly treat them, reducing losses of farmhouses. However, a lack of related equipment and human resource hampered its effort to minimize its losses. This study tries to develop diagnosis system as part of measures to curb these domestic animal diseases. This paper present the 센서 node based on IEEE 802.15.4 which can be attached to the animal body for real-time temperature measurement. We design and implement tiny chip-type that can be attached to the body of animals. Then, we use available power only when measuring temperatures in a long term-basis. In this paper, the 센서 node was applied to horse's neck. We measure the horse's body temperature between $32.2^{\circ}C{\sim}33.7^{\circ}C$ and analyze phenomenon data for 4 months.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.125-126
• /
• 2023

Recently, heat island and dry island phenomena occur frequently due to land surface development and excessive energy consumption in urban areas. As a result, the surface temperature of the building and the entire temperature of its surroundings are increased, and as a result, the durability of the building is rapidly deteriorated. In order to suppress these causes, a method of maintaining the temperature of road heating wires was implemented as a temporary measure, but this did not predict climate change. Therefore, this study is a method to measure the compressive strength, density, and thermal conductivity of lightweight concrete using waste glass foam beads. After fabricating a simple chamber, the temperature and humidity of the inside and outside were measured with an Arduino device in consideration of external factors. Therefore, if waste glass foam beads made through proper mixing are constructed in the urban center, the quality of the urban can be improved.