• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.8
• /
• pp.847-853
• /
• 2011

In this study, a hybrid powder-extrusion process involving the control of temperature dwelling time for improving the formability of Zn-22Al powder was developed and the effect of dwelling time on the mechanical properties of a spur gear with a pitch circle having a diameter of 1.8 mm was investigated. General extrusion experiments were carried out at different temperatures such as 290, 300, and $310^{\circ}C$. Spur gears with good qualities and without any surface defects were obtained in the case of extrusion temperature of $310^{\circ}C$ and ball-milling duration of 32 h. The Vickers hardness distribution was non-uniform, and after the sintering process, an internal crack was generated because of the different deformation energy between gear central part and teeth. To overcome the abovementioned problems, research on controlling the dwelling time of the extrusion temperature in the powder-extrusion process was carried out. Good-quality spur gears were obtained when the dwelling time was 15 min.

• Journal of the Korean Ceramic Society
• /
• v.53 no.2
• /
• pp.246-252
• /
• 2016

Complex designed silica-based ceramic cores were fabricated by ceramic injection molding. Slow heating rate (0.2K/min) for debinding restrained bloating on the surface of ceramic cores. To investigate effect of sintering conditions on mechanical properties of ceramic cores, green bodies were sintered at temperatures in a range from $1150^{\circ}C$ to $1400^{\circ}C$ for various dwelling times (6 h to 48 h). Sintering above $1300^{\circ}C$ for 12 h and dwelling time over 24 h at $1200^{\circ}C$ reduce the flexural strength and increase the linear shrinkage of ceramic cores. Cristobalite, formed by high sintering temperature or long dwelling time, induces reduction of mechanical properties due to its phase transformation, which is accompanied by volume contraction and microcracking. Ceramic core sintered at $1200^{\circ}C$ for 12 h endured wax patterning and shell molding, and was manufactured successfully.

• Journal of Powder Materials
• /
• v.4 no.2
• /
• pp.83-89
• /
• 1997

A finite element analysis to solve the coupled thermomechanical problem in the plane strain upsetting of the porous metals was performed. The analysis was formulated using the yield function advanced by Lee and kim and developed using the thermo-elasto-plastic time integration procedure. The density and temperature dependent thermal and mechanical properties of porous metals were considered. The internal heat generation by the plastic deformation and the changing thermal boundary conditions corresponding to the geometry were incorporated in the program. The distributions of the stress, strain, pressure, density and temperature were predicted during the free resting period, deformation period and dwelling period of the forging process.

• Journal of the Society of Disaster Information
• /
• v.12 no.3
• /
• pp.210-218
• /
• 2016

In this study, the fire analysis program FDS and Pathfinder was used to analysis a simulated accidental fire of a narrow dwelling space as a test bed. The results showed that the evacuation time of the H form internal building structure was the fastest at 285 seconds. In addition, when the automatic sprinkler system functioned with the entrances closed, the temperature distribution was lower and the visible smoke density was reduced.

• Journal of Conservation Science
• /
• v.38 no.1
• /
• pp.64-71
• /
• 2022

Many investigations have been conducted on the biological damage and environmental conditions necessary to preserve the Janggyeong Panjeon and Daejanggyeongpan (woodblocks). We performed a survey on the concentration and diversity of airborne fungi in the Janggyeong Panjeon and compared them with the results of a survey from 2012. The temperature of the Beopbojeon building was slightly lower, while the relative humidity was higher than those found at the Sudarajang building. The concentration of airborne fungi in the Beopbojeon was 1.44-fold that of the Sudarajang. It was confirmed that the concentration and diversity of airborne fungi in the Janggyeong Panjeon differed depending on the sampling site. In total, 23 fungal genera were identified from the air samples, and 11 fungal and 1 bacterial genera were identified from the surface of the woodblocks. Among these, only five types of fungi were commonly distributed in the indoor air and surface of the Daejanggyeongpan; however, 58.3% of the fungi identified on the surface of the woodblocks were not observed in the in the air samples. The surface-dwelling fungi may accumulate dust to form microbial communities over time.

• Journal of Preventive Medicine and Public Health
• /
• v.2 no.1
• /
• pp.77-80
• /
• 1969

In the cities nowadays, the dwelling conditions of Cackroach are provided by use of various kinds of construction material, installation of heating and cooling facilities that maintain moderate temperature, filthy sanitation, and lack of knowledge about insect as mechanical Vector. Cakroach is infectious disease Vector, and it proves to be of much importance in the public health. Considering such importance, the author has surveyed the distribution of Cackroach in the housing areas of Seoul City from May 1969 to the end of August 1969, and has come to the following conclusion: 1. House dwelling Cackroach collected in the City of Seoul are of two species, i. e. Blatella Germanica Linneaus and Periplaneta Japonica Karny. 2. Most of cackroach collected in Seoul are Blatella Germanica Linneaus and they are distributed in whole area of Seoul while that of Periplaneta Japonica Karny is distributed only in the limited area. 3. Dwelling places of Blatella Germanica Lineaus are in grog shop, Korean food restaurants, bakery shops, and patient rooms in hospitals. Many of them are found in tile kitchens and dining rooms of restaurants, and tearooms. They live in groups at older houses with much crack, warm and humid places. 4. For method of collection, the hand collection was the most effective. In trap collection during the day time, when the trap is placed at the narrow corners off the ground after confirming the dwelling places of cackroach, the match trap was more effective than the flask trap in collecting. In case of collecting during the night time, the flask trap was much more effective method than the match trap.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.1
• /
• pp.23-31
• /
• 2012

Recent research on stand-alone focused on the improvement and development of functions for solving problems such as the limited operating time of stand-alone installed at dwelling and their low reliability caused by false alarms, but it is more urgent to study on the operating range of stand-alone sensor in consideration of the impacts of combustion products on residents because the primary goal of fire safety is minimizing casualties. This study purposed to propose the optimized operating range of stand-alone sensor in consideration of the impacts of combustion products on residents. For this purpose, we made a mathematical approach to the change of temperature over the lapse of time in compartment fires similar to house fires, and established the standards of the body's response against heat and smoke based on literature review. In addition, we surveyed domestic and foreign technological standards for stand-alone sensor, and converted them to standards for residents of the body's response against heat and smoke using mathematical model equations and analyzed them comparatively.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.325-330
• /
• 2006

Modern people spend more and more time in an automobile in their daily life. In this life, drivers and passengers should create HVAC environment in the automobile interior which is not only for convenient transportation but also give comfortable feeling with dwelling culture. Also, the latest cars give much importance for the role of HVAC system that controls the environment of the area for passengers more than just basic capability. There are solar radiant heat, surface temperature, refrigeration system(temperature, humidity, air current, velocity), and dust for the factor which have an effect on the HVAC environment in the automobile interior, also these are being carried for the HVAC environment delivered an individual character. In this study, we drew the automobile interior as three dimension and arranged a method of numerical analysis on HVAC environment in the automobile interior displaying air current distribution and temperature distribution through simulation of the automobile interior on the ventilation volume and outlet area. The aim of this study is to develop the estimated method for HVAC environment. in the automobile interior.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.8
• /
• pp.176-182
• /
• 2018

One of the most important factor of esthetic prosthesis is the color of the teeth. Zirconia is produced in the process of design, milling, coloring, drying, and sintering. The effect of the drying degree of zirconia colorant on the color tone is examined. For the experiment, a total of 45 zirconia specimens(15 for each) were fabricated by using cad/cam system. The zirconia specimens(L block(LAZOR), Z block(Zircos-E block posterior), A block(AlphaZ)) were then subjected to zirconia sintering in accordance with the manufacturer's instructions, using a chemical coloring agent to Non-drying(0sec), intermediate (10sec), and completely dried (10min) temperature holding times. The color tone was measured using a spectrophotometer. The results were analyzed with a One-way analysis of variance and the Tukey post-hoc test (${\alpha}=.05$) The $L^*$ values of L, A specimens, $a^*$ values of A specimens, and $b^*$ values of Z specimens were not statistically different according to the degree of drying (p>0.05), While the $L^*$ value of Z specimen, $a^*$ value of L, Z specimen, $b^*$ values of L, A specimens were statistically different according to the degree of drying(p <0.05). In conclusion, the drying of zirconia colourants improves zirconia brightness and increases the optical properties of the enamel.

• Journal of the Korean Ceramic Society
• /
• v.42 no.5 s.276
• /
• pp.326-332
• /
• 2005

Phase transformation effects on mechanical properties of $Ge_2Sb_2Te_5$, which is a promising candidate material for Phase Change Random Access Memory (PRAM), were studied. $Ge_2Sb_2Te_5$ thin films, which was thermally annealed with different conditions, were analyzed using XRD, AFM, 4-point probe method and reflectance measurement. As the temperature and the dwelling time increased, crystallity and grain size increased, which enhanced elastic modulus and hardness. Furthermore, N2 doping, which was used for better electrical properties, was proved to decrease elastic modulus and hardness of $Ge_2Sb_2Te_5$.