• Nuclear Engineering and Technology
• /
• v.28 no.2
• /
• pp.118-128
• /
• 1996

The lattice parameters of stoichiometric $UO_2$ and $U_{1-y}Er_{y}O_2$ in the range of y=0.01 to y =0.33 were determined with use of X-ray diffraction data. Oxygen potentials have been measured by means of a thermogravimetric method in the range of 1200~$1500^{\circ}C$ and $10^{-14}$ $\leq$ $Po_2$ $\leq$ $10^{-3}$ for pure $UO_2$ and $U_{1-y}Er_{y}O_{2{\pm}x}$ solid solutions with y=0.02, y=0.06 and y=0.20, respectively. Their oxygen partial pressures were maintained by controlling $CO_2$/CO mixture atmosphere, and the $Po_2$ values corresponding to x of $U_{1-y}Er_{y}O_{2{\pm}x}$ solid solutions were measured with an electrolyte oxygen sensor. The lattice parameter decreases linearly with an increase in the erbium content. The change of the lattice parameter can be expressed in a linear equation of y as a($\AA$) =5.4695-0.220y for 0 $\leq$y$\leq$0.33. The experimental coefficient of y -0.220 in $U_{1-y}Er_{y}O_2$ was an intermediate value between the calculated values -0.273 and -0.156 in the case of $U^{5+}$ and $U^{6+}$, respectively. The (equation omitted) has been found to undergo abrupt increase in the range of -360 to -270 kJ/mole for y=0.06 and -320 to -220 H/mole for y=0.20, respectively, in the temperature range of 1200-$1500^{\circ}C$. (equation omitted) increases with erbium content, but the effect of the dopant for x =0.01 is less significant than that for stoichiometry. The oxygen potentials for $UO_2$ and $U_{0.98}Er_{0.02}O_{2+x}$ can be approximately represented by the $U^{5+}$/$U^{4+}$ model but those for y$\geq$ 0.06 in $U_{1-y}Er_{y}O_{2{\pm}x}$ solid solutions cannot be interpreted by the mean uranium valence model.

• Tunnel and Underground Space
• /
• v.16 no.2 s.61
• /
• pp.109-134
• /
• 2006

Rocks undergo weathering processes influenced by changing in pressure-temperature condition, atmosphere, underground water, and rainfall. The weathering processes change physical and chemical characteristics of the rocks. Once the rocks are weathered, the characteristics of them are changed and, because of the changing, several disadvantages such as rock slope failures and underground water spouts are can occur. Before we cut a large rock slope, therefore, we must analyze current weathering conditions of rocks and predict weathering processes in the future. Through the results of such analyses, we can judge reinforcement works. In order to comply with such requests, chemical weathering sensitivity analysis which was analyzed from chemical weathering velocities and other characteristics of rocks has been applied in several prior construction works in Korea. But, It is defective to use directly in engineering fields because it was developed for soils(not rocks), it has too mny factors must be considered and the relationships between the factors are not clear, and it is hard to explain the weathering processes in engineering time range. Besides above, because it has been used for isotropic rocks, this method is hard to apply to anisotropic rocks such as sedimentary rocks. Acceding to studies from morphologists (e.g. Oguchi et al., 1994; Sunamura, 1996; Norwick and Dexter, 2002), time dependent strength reduction influenced by weathering shows a negative exponential function form. Appling this relation, one can synthesize the factors which influence the weathering processes to the strength reduction, and get meaningful estimates in engineering viewpoint. We suggest this weathering sensitivity characterization method as a technique that can explain time dependent weathering sensitivity characteristics through strength changes and can directly applied the rock slope design.

• Journal of Aquaculture
• /
• v.3 no.1
• /
• pp.49-63
• /
• 1990

A population ecological study was carried out to estimate survival and growth rates, biomass, biological production and turnover ratio of cultured sea squirt, Halocynthia roretzi, by growth stages, using data from in situ culture experiment off Hansando in the southern part of Korea from February 1985 to July 1986. The squirt population followed an exponential decay function and the instantaneous coefficient of total mortality (Z) was estimated to be 0.0614 $month^{-1}$(Var (Z) = 0.000126). Growths in total weight and meat weight of squirts were expressed as linear functions during the period of culture experiment. The growth of squirts showed a negative correlation with the water temperature. The mean biomass per string ranged from 2.14 kg for March of the first year to 16.26 kg for March of the next year. The biological production per string was estimated to range from 3.28 kg for the first summer (June - July) to 6.46kg for the first late winter (February-March). The peak of turnover ratio occurred in the late winter (February-March) as 3.013 and the ratios sharply declined thereafter. Based on the results of this study, management implications for culturing sea squirts were also suggested. The optimum harvest time ($t_{mb}$) when the peak biomass in terms of total weight occurred was estimated to be late June of the second year, which corresponded to 16.7 months after the main hanging. However, the time when the peak biomass in terms of meat weight was occurred was early July of the second year. The maximum harvest biomass was 17.4 kg per string in terms of total weight and 6.3 kg per string in terms of meat weight. In conclusion, the process of culture should be conducted on the basis of the knowledge of population ecological theories as shown in this study.

• Journal of Mushroom
• /
• v.16 no.3
• /
• pp.203-207
• /
• 2018

'Daebak', a new cultivar of Grifola frondosa, was bred by mating two monokaryotic strains isolated from 'F14309' and 'GMGF44062' at the Mushroom Research Institute, Gyonggi-Do ARES in 2017. The optimum temperature for mycelial growth of 'Daebak' was $25^{\circ}C$ on PDA medium. In bottle cultivation, the culture period of 'Daebak' was 57 days, which was 2 days shorter than that of 'Cham' (control). The pinheading rate of 'Daebak' was 98.4%, which was 24.8% higher than that of 'Cham' and its CV (Coefficient of variation) was 0.6%, 5.3% lower than that of 'Cham'. Regarding the growth characteristics of 'Daebak', the diameter and thickness of the pileus were 27.7 mm and 1.73 mm, respectively, and the diameter and height of the fruiting bodies cluster were 132 mm and 87.2 mm, respectively. The pileus was thinner but the fruiting bodies cluster was larger than that of 'Cham'. Fruiting bodies weighed 139 g per 1,100 ml bottle of 'Daebak', which was 28% higher than that for 'Cham', with a CV of 2.5%, which was 6.2% lower than that of 'Cham'. The yield per 10,000 bottles (used for cultivation) of 'Daebak' was 1,376 kg, 70% higher than that of 'Cham', with a CV of 3.0% that was 11.5% lower than that of 'Cham'. With respect to physical characteristics, the strength and brittleness of the fruiting body of 'Daebak' was less than that of 'Cham'. When considering the period available for sale, the shelf life of 'Daebak' was 42 days, which was 6 days longer than that of 'Cham'.

• Journal of Life Science
• /
• v.23 no.8
• /
• pp.1025-1031
• /
• 2013

From a 95% ethanolic extract of H. diffusa, four marker compounds (HD1~HD4) were isolated, which were relatively unique and exist in comparably high contents. The structures of marker compounds were identified as digitolutein (1), 2-hydroxy-3-methylanthraquinone (2), (E/Z)-6-O-p-coumaroyl scandoside methyl ester (4:1 mixture) (3), and (E/Z)-6-O-p-methoxycinnamoyl scandoside methyl ester (4:1 mixture) (4), respectively, on the basis of $^{13}C$ and $^1H$-NMR analyses. The calibration curves of marker compounds showed high linearity, as their correlation coefficient ($R^2$) were in the range of 0.9991~0.9999. In addition, the limit of detection (LOD) and the limit of quantification (LOQ) were $0.03{\sim}0.07{\mu}g/ml$ and $0.099{\sim}0.231{\mu}g/ml$, respectively. The intra-day/inter-day precision and accuracy were 0.23~2.00%/0.25~1.16% and 94.60~108.44%/94.73-110.23%, respectively. The optimal HPLC conditions for the simultaneous quantification of HD1~HD4 were as follows: stationary phase; Merck Chromolith RP-18e ($100{\times}4.6mm$, $5{\mu}m$), column temp.; room temperature, UV detection at 280 nm, flow rate; 2.0 ml/min, injection volume; $10{\mu}l$, mobile phase; start with the mixture of 80% solvent A ($H_2O$ containing 0.5% acetic acid) and 20% solvent B (methanol containing 0.5% acetic acid) and gradually decrease solvent A to 40% in 9 min., then retain this condition to 18 min. Under the HPLC condition, the four marker compounds 1~4 were successfully separated without any interference of other constituents. The results obtained in this study are expected to be helpful for the development of nutraceutics and natural medicines and for the quality control of this plant.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.22 no.3
• /
• pp.183-193
• /
• 2020

This study was conducted to evaluate the effect of environment factors on the growth of autumn season cultivation of Kimchi cabbage using the big data in terms of public open data(weather, soil information, and growth of crop, etc.). The growth data and the environment data such as temperature, daylength, and rainfall from 2010 to 2019 were collected. As a result of composing the correlation matrix, the height and leaf number showed high correlation in growing degree days(GDDs) and daylength, and the yield showed negative correlation in growing degree days and the concentration of clay. GDDs and daylength explained about 89% and 84% of variation in height, respectively. These two environmental factors also explained about 85% and 79% of variation in leaf numbers, respectively. In contrast, the coefficient of determination was low for yield when GDDs and concentration of clay was used. The outcome of regional statistical analysis indicated that relationship between yield and sum of sand and silt were high in Haenam and Jindo areas. Hierarchical cluster analysis, which was performed to verify the association of yield, GDDs, and concentration of clay, showed that Haenam and Jindo were clustered together. Although GDDs and yield vary by year and region, and there are regions with similar concentration of clays, observation data are grouped as the result. These suggests that GDDs and soil texture are expected to be related to yield. The cluster analysis results can be used for further data analysis and agricultural policy establishment.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.22 no.3
• /
• pp.215-231
• /
• 2020

Forest landscape models (FLMs) can be used to investigate the complex interactions of various ecological processes and patterns, which makes them useful tools to evaluate how environmental and anthropogenic variables can influence forest ecosystems. However, due to the large spatio-temporal scales in FLMs studies, parameterization and validation can be extremely challenging when applying to new study areas. To address this issue, we focused on the parameterization and application of a spatially explicit forest landscape model, LANDIS-II, to Mt. Gyebang, South Korea, with the use of the National Forest Inventory (NFI) and long-term ecological research (LTER) site data. In this study, we present the followings for the biomass succession extension of LANDIS-II: 1) species-specific and spatial parameters estimation for the biomass succession extension of LANDIS-II, 2) calibration, and 3) application and validation for Mt. Gyebang. For the biomass succession extension, we selected 14 tree species, and parameterized ecoregion map, initial community map, species growth characteristics. We produced ecoregion map using elevation, aspect, and topographic wetness index based on digital elevation model. Initial community map was produced based on NFI and sub-alpine survey data. Tree species growth parameters, such as aboveground net primary production and maximum aboveground biomass, were estimated from PnET-II model based on species physiological factors and environmental variables. Literature data were used to estimate species physiological factors, such as FolN, SLWmax, HalfSat, growing temperature, and shade tolerance. For calibration and validation purposes, we compared species-specific aboveground biomass of model outputs and NFI and sub-alpine survey data and calculated coefficient of determination (R²) and root mean square error (RMSE). The final model performed very well, with 0. 98 R² and 8. 9 RMSE. This study can serve as a foundation for the use of FLMs to other applications such as comparing alternative forest management scenarios and natural disturbance effects.

• Horticultural Science & Technology
• /
• v.32 no.3
• /
• pp.353-358
• /
• 2014

Hot water dipping test was conducted for chicon to restrict red discoloration of its basal part which impairs the product value during sales. Hot water dipping treatment was given to chicon for 4 min and for 8 min at $38^{\circ}C$ and for 2 min and 4 min at $42^{\circ}C$, and for 1 min and 2 min at $45^{\circ}C$, along with control (for one min at $20^{\circ}C$). The red discoloration indices of basal part of chicon during sensory evaluation on the sixth day of storage under the storage temperature at $10^{\circ}C$ was lower at $42^{\circ}C$ for 2 min, $42^{\circ}C$ for 4 min and $45^{\circ}C$ for 1 min treatments. The color change value of the basal part in chicon measured by colorimeter showed that the lowest ${\Delta}a^*$ and ${\Delta}h$ were maintained in the basal part of chicon treated at $42^{\circ}C$ for 2 min. Whereas, color changes in $42^{\circ}C$ for 2 min and $45^{\circ}C$ for 1 min treatments were significantly low as compared with that of control. The contents of total phenolic compounds which are the substances that cause red discoloration of basal part in chicon were lowest at $42^{\circ}C$ for 2 min, $42^{\circ}C$ for 4 min and $45^{\circ}C$ for 1 min treatments. The activity of phenylalanine ammonia lyase (PAL) resposible for in the synthesis of phenolic substances was the least in $42^{\circ}C$ for 2 min treatment. Whereas, PAL activity of the chicons treated a t $42^{\circ}C$ for 2 min and at $45^{\circ}C$ for 1 min were significantly lower than that of control. However, red discoloration was progressed as similar level with that of control in the basal part of chicon at $45^{\circ}C$ for 2 min. The contents of total phenolic compounds and PAL activity in this treatment were not significantly different from those in control. The polyphenol oxidase (PPO) activity which causes red discoloration of cut tissues was low in all the treatments including $42^{\circ}C$ and $45^{\circ}C$ treatment at which no inhibition effects of the red discoloration of basal part of chicon were observed. When the correlation coefficient between each investigated index was tested, most of them showed high correlation except the PPO activity and particularly and the red discoloration index and sensory evaluation ${\Delta}h$ values, and PAL activity and total phenolic compounds content were $r=0.927^{**}$, and $r=0.942^{**}$, respectively.

• Korean Journal of Food Science and Technology
• /
• v.35 no.5
• /
• pp.818-824
• /
• 2003

Capillary electrophoresis (CE) and near-infrared spectroscopy (NIRS) were performed to discriminate astragalus roots (Astragalus membranaceus) according to geographical origin (domestic or foreign). Two-hundred-and-four astragalus roots were extracted with 30% methanol in 0.1 M phosphate buffer (pH 2.5) and separated in a uncoated fused-silica $(50\;{\mu}m{\times}27\;cm)$ capillary. Conditions for optimal analysis included: temperature $-45^{\circ}C$, voltage -14 kV, and pressure injection time -8 sec. The optimal separation buffer was 0.1 M phosphate buffer (pH 2.5) containing 40 mM hexane sulfonic acid with 20% 2-methoxy ethanol. Raw NIR spectra were obtained using NIRS, and modified partial least square regression was used to develop the prediction model. The correlation coefficient and standard error of prediction were 0.915 and 14.3%, respectively. Under the optimal conditions established for CE and NIRS, the geographical origins of the astragalus roots were correctly identified in 80 and 97%, respectively. Astragalus roots that were not discriminated by NIRS were correctly discriminated by CE. Hence, CE and NIRS are potential methods for discriminating the geographical origins of astragalus roots that complement one another.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.5
• /
• pp.549-557
• /
• 2006

The characteristics of supercritical water oxidation have been studied to decompose the waste anionic exchange resins which were produced from a power plant. The waste resins from a power plant were mixture of anionic and cationic exchange resins. The waste anionic exchange resins had been separated from the waste resins using a solid-liquid fluidized bed. It was confirmed that the cationic exchange resins were not included in the separated anionic exchange resins by the elemental and thermogravimetric analysis. A slurry of anionic exchange resins which could be fed continuously to a supercritical water oxidation apparatus by a high pressure pump was prepared using a wet ball mill. Although the COD of liquid effluent had been reduced more than 99.9% at 25.0 MPa and $500^{\circ}C$ within 2 min, the total nitrogen content was reduced only 41%. The addition of nitric acid to the slurry could reduce the total nitrogen content in treated water. The central composite design as a statistical desist of experiments had been applied to optimize the conditions of decomposing anionic resin slurry by means of the COD and total nitrogen contents in treated waters as the key process output variables. The COD values of treated waters had been reduced sufficiently to $99.9{\sim}100%$ af the reaction conditions of $500{\sim}540^{\circ}C$, 25.0 MPa within 2 min. The effects of temperature and nitric acid concentration on COD were not significant. However, the effect of nitric acid concentration on the total nitrogen was found to be significant. The regression equation for the total nitrogen had been obtained with nitric acid concentration and the coefficient of determination($r^2$) was 95.8%.