• 제목/요약/키워드: Telecommunication cable

검색결과 75건 처리시간 0.026초

IEC 96-1 Line Injection Method를 이용한 다 도체 통신케이블 차폐층의 전달임피던스 측정 (Measurement of Transfer Impedance on Shielded Multiconductor Telecommunication Cables using IEC 96-1 Line Injection Method)

  • 이현영;오호석;박동철
    • 한국전자파학회논문지
    • /
    • 제14권4호
    • /
    • pp.377-383
    • /
    • 2003
  • 동(copper) 케이블을 이용한 xDSL 초고속서비스가 널리 보급됨에 따라 외부 전자파에 의한 통신케이블의 전자파 결합특성을 해hi하기 위해 케이블 쉴드층의 전달임피던스가 중요하게 되었다. 본 논문에서는 xDSL 서비스를 제공하기 위해 사용되는 대표적인 형태의 통신케이블에 대해 IEC 96-1의 line injection method를 이용하여 전달임피던스를 측정하였다. 또한 injection line의 위치, 내부 도체의 위치가 전달임피던스에 어떻게 영향을 주는지를 분석하였으며, 이를 근거로 통신케이블의 전달임피던스 특성 모델을 제시하였다.

EMC Design Rule을 이용한 통신 System의 EMC Design (EMC Design of Communication System on the Basis of EMC Design Rule)

  • 박학병;박종성;이승한;강석환
    • 한국전자파학회논문지
    • /
    • 제12권1호
    • /
    • pp.77-83
    • /
    • 2001
  • 본 논문에서는 I/O Cable을 가진 일반 통신시스템의 전자파 방사 Mechanism을 분석하여, Design 에 있어 중요한 Parameter을 도출하였다. System 의 경우 I/O Cable, Ventilation Hole 기구물의 Shielding 대책 등이 중요한 EMC design issue가 된다. 일반적인 전자제품에 비해 통신 System 은 다양한 통신을 위한 Cable을 가지므로, I/O Cable의 중요성이 크다. 따라서 I/O Cable의 Coupling mechanism을 실험 및 Simulation 방법에 의해 분석하고, Low Emission을 위한 EMC Design Rule을 제시하였다. 본 EMC Design Rule을 기반으로 통신 System의 Design을 실현하여, 제품의 Redesign 및 복잡한 Debug과정이 없이 효과적으로 전자파 양립성 규격을 만족한 예를 제시하였다.

  • PDF

G-PON용 높은 전광변환효율을 갖는 1.31 um 비냉각 DFB-LD (1.31 um Uncooled DFB-LD with High Slope Efficiency for G-PON Application)

  • 김정호;피중호;김덕현;박칠성;류한권;구본조
    • 한국광학회지
    • /
    • 제18권5호
    • /
    • pp.333-336
    • /
    • 2007
  • [ $-40^{\circ}C$ ]에서 $85^{\circ}C$의 온도에서 냉각장치 없이 동작하는 1.31 um 비냉각 DFB-LD가 유기 금속 화학 증착법에 의해 성장되었다. 높은 전광변환효율을 갖는 레이저의 제작은 스트레인이 인가된 다중양자우물 구조의 최적화를 통해 가능하며, 특히 스트레인의 양, 양자 우물의 두께, 전위장벽의 두께, 양자 우물의 수, 활성층의 폭에 주로 영향을 받는다. 본 연구에서 제작된 DFB-LD는 $25^{\circ}C$$85^{\circ}C$에서 전광변환효율은 0.38[mW/mA]와 0.26[mW/mA], 발진개시전류는 각각 7.1[mA]와 19.8[mA]의 값을 가졌다.

지중송전선로와 병행하는 기설통신선의 유도전압 분석 (Analysis of Induced Voltage in Parallel Telecommunication Cables from Underground Power Cables)

  • 임광식;장우석;한창석;홍동석;유진선
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2011년도 제42회 하계학술대회
    • /
    • pp.523-524
    • /
    • 2011
  • This paper covers induced voltage in parallel telecommunication cable with underground power cable to be linked between substations. The simulation was carried out the induced voltage in telecommunication cable according to the transposition of power cables and fault location for various conditions. This study based on the EMTP/ATPDraw with actual underground cable systems while the power cables are in steady state and transient state.

  • PDF

전기철도 복선화 및 차폐 케이블 적용에 따른 통신선 유도장해 차폐 효과 (Screening Effects of Double-track Electric Railway and Shielded Cables on Communication-Line Inductive Interference)

  • 설일환;최규형
    • 한국산학기술학회논문지
    • /
    • 제14권10호
    • /
    • pp.5148-5155
    • /
    • 2013
  • 전기철도와 인접하여 병행 설치되어 있는 전기통신선에는 전자유도현상에 의한 유도전압이 발생하여 통신장애 및 안전사고가 발생할 수 있다. 이와 같은 유도장해를 경감시키고 통신신뢰성을 확보하기 위하여, 차폐케이블의 적용과 함께 최근 추진되고 있는 복선전철화에 따른 영향을 검토할 필요가 있다. 본 논문에서는 AT급전방식 전기철도에서 인근 통신선에 유기되는 유도전압에 영향을 미치는 각종 인수 및 산출식을 검토하고, 유도전압 발생 예측치를 시뮬레이션을 통하여 정량적으로 분석하였다. 시뮬레이션 결과, 복선철도에서는 단선철도에 비해 통신선 유도잡음 전압이 18[%] 정도 감소하여 타궤조 효과가 영향을 미치는 것으로 나타났다. 또한, 복선철도를 기준으로, 50% 차폐 통신케이블에서는 유도잡음전압이 1/8로 감소하였으며, 15% 차폐통신케이블에서는 1/15로 감소함에 따라 차폐효과가 크고 유도잡음전압 영향을 최소화할 수 있는 것으로 나타났다.

FDTD Analsysis of Lightning-Induced Voltages on Shielded Telecommunication Cable with Multipoint Grounding

  • Ju, Jae-Cheol;Lee, Hyun-Young;Park, Dong-Chul;Chung, Nak-Sam
    • Journal of electromagnetic engineering and science
    • /
    • 제1권1호
    • /
    • pp.88-94
    • /
    • 2001
  • In this paper, the lightning-induced voltages on shielded twisted-pair wires with multipoint grounding on cable sheath are calculated by using finite-difference time domain (FDTD) method. The equivalent single-wire line that represents a bundle of twisted-pair wires is adopted for computational efficiency. A finitely conducting ground is also taken into account in both lightning electromagnetic field calculations and surge propagation along the shielded cable for a practical simulation. It is found that multipoint additional grounding on cable sheath provides more shielding effectiveness especially in the early time response of the lightning-induced voltages. From this study, the requirements for lighting surge protection devices in a telecommunication subscriber cab1e can be established.

  • PDF

광화이버를 이용한 전력케이블 진단을 위한 새로운 이론적 모델링 (New theorical modeling for diagnosis of power cable using optic fiber)

  • 김태선;서철헌
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1998년도 하계학술대회 논문집 E
    • /
    • pp.1837-1839
    • /
    • 1998
  • This paper proposes the strain-insensitive temperature sensing in quasi-distributed sensor system using different thermal expension coefficient materials. This system has the high sensitivity and hasn't the necessity of reference signal. We can monitor the condition of the power cable with this system.

  • PDF

전력유도 현상과 차폐계수 (Phenomenon of Power Interference and Screening Factor)

  • 황종선;김영민;이경욱;김재준
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2001년도 추계학술대회 논문집
    • /
    • pp.621-624
    • /
    • 2001
  • A metal sheath provides a cable with electrostatic screening and a degree of magnetic screening. The presence of a screen on a cable also reduces the induction arising from the high-frequency components of transients caused by power-line switching and also induced transients from lightning strokes; such transient induced voltages are of increasing importance with the increasing use of miniaturized telecommunication equipment with very small thermal capacity. This paper describes electrostatic induction and electromagnetic induction caused by power interference. Also screening factors are proposed.

  • PDF

A study on the recycling technique for jelly-filled copper cable

  • 김보겸;박태동
    • 한국정보통신설비학회:학술대회논문집
    • /
    • 한국정보통신설비학회 2008년도 정보통신설비 학술대회
    • /
    • pp.513-515
    • /
    • 2008
  • Due to the rapid development of telecommunication industry, most telecom operators are investing to upgrade their access networks by using optical cables instead of copper cables. Building new telecom ducts for optical cable installation requires so huge capital expenses that most telecom operators need to remove unused copper cables in order to secure enough space to in-stall optical cables. In this paper, we will present a alternative method to extract copper from removed copper cables.

  • PDF